Digital Multiphase Controller for Telecom and General Purpose Applications

712370

Alpha and Omega Semiconductor Limited (AOS) has introduced the first product of the AOS Digital Controller product portfolio. The AOZ97774QE is offered in a QFN 5 x 5 mm package and provides the industry’s most flexible DC-DC controller supporting 5G Wireless, Networking, Optical Communication, and General-Purpose DC-DC applications.

The AOZ97774QE provides DC-DC power conversion from the 12 V power rail to Point-of-Load voltage for all main subsystems of the 5G wireless network, including CU, DU, and RU platforms. The part can be used for all 12 V input applications where multi-phase power is required, and the main output is three phases or less. The Control Unit (CU), Digital Unit (DU), and Radio Unit (RU) are all critical subsystems that require the higher power that is supported with the AOZ97774QE and AOS Power Stages. The AOZ97774 offers up to 15 stored pin-strapped configurations, which is significantly more stored configurations than other solutions on the market. The multiple configurations allow for the one controller to behave like 15 separate power designs minimizing product management, faster system design, and easier logistics control. The controller also has NVM configuration, with 1,000 times read/write capability, which is also provided for maximum flexibility. This is very useful during the system bring-up and debugs process, saving time and improving the reliability of results.

Technical Highlights

The AOZ97774QE Digital Dual Output Multiphase Controller also includes features specifically designed to meet the specifications of the Intel VR13 infrastructure applications. The controller has the SVID Digital High-Speed interface for those applications that have this requirement.

The AOZ97774QE supports the high accuracy IMON/TMON input for use with AOS or competitor Smart Power Stages (SPS). The recommended companion SPS products are AOZ5276, AOZ5273, and AOZ5277. Using the AOZ5276 (80 A peak current) SPS, 240 A peak can be supported with the three-phase output and 80 A peak on the 2nd output. The typical application DC current load per phase is in the range of 25-50 A.

The AOZ97774QE is powered by a single 3.3 V supply and provides output voltage with 0.5 % accuracy. AOS’s proprietary Digital COT architecture provides ultra-fast load transient response and enables stable and low voltage ripple operation with small-sized ceramic capacitors, further reducing solution size and cost.

Key Features

  • Powered from a single 3.3 V supply.
  • Digital Voltage Mode Constant On-Time Control.
  • Fully configurable through PMBUS.
  • Provides 15-pin strap selectable device configurations, including NVM configuration.
  • Supports high accuracy IMON/TMON with AOS’s industry-standard footprint SPS: AOS SPS AOZ5276QI (90 A), AOZ5273QI (70 A), and AOZ5277QI (60 A).
  • Supports Intel VR13 SVID.
  • Power monitoring of the 12 V input supply.
  • Auto DPM – Dynamic Phase Management.
  • 0.5 % Vout accuracy.
  • Ripple Reduction at light load.
  • Ceramic capacitor stable.
  • Overvoltage, Undervoltage, and Overcurrent protection.
  • Overtemperature protection.
  • Phase Fault and Feedback Disconnection protection.
  • Black Box fault recording.
  • QFN 5 x 5 package.

“The AOZ97774QE and companion, Smart Power Stage, offer a highly flexible and configurable solution for Information Infrastructure applications including Wireless and Wired Networking, Optical Communication, Server, Cloud Computing, and General-Purpose applications including FPGA and ASIC power. The 15 configurations allow for fast time to market and minimizes the number of part numbers required to support a large portfolio of customer products,” said Daniel Lenskold, Director of Digital Power Marketing at AOS.

Click here to learn more about AOZ97774QE.