RECOM Unveils DC-DC Converters for Test and Measurement Applications

RECOM Unveils DC-DC Converters for Test and Measurement Applications

RECOM has launched its latest generation, cost-effective, high-performance “K” series pinned DC-DC converters with up to 30 W rating and wide input ranges in a miniature 1” x 1” package with a dimension of 25.4 x 25.4 x 10.2 mm.

Available with 10 W, 20 W, and 30 W output, the REC10K, REC20K, and REC30K parts have 4:1, 9-36 V, and 18 - 75 VDC inputs and a wide selection of tightly regulated outputs: 3.3 V, 5 V, 9 V, 12 V, 15 V, 24 V, +/-5 V, +/-12 V, +/-15 V, and +/-24 V (REC10K only). Additionally, the REC30K has an option for a 2:1, 36 - 75 VDC input with increased efficiency. Single outputs can be trimmed by +/-10% and an on/off control is provided.

Isolation is ‘functional’ grade 2 kVDC/1 minute (1.6 kVDC/1 minute for the REC10K) according to IEC/EN/UL62368-1, and the parts operate from -40°C to +105°C ambient with derating, (100°C for the REC10K). External filters as shown in the data sheets enable compliance with conducted EMC ‘Class A and B’ levels.

Comprehensive protection against input undervoltage, output over-current, over-voltage, and short circuits is included, and the parts boast high MTBF figures – up to 1.5 MHrs at 25°C according to MILHBK-217-F. The parts are ideal for applications where cost and high power density are priorities without compromising performance or reliability. Typical uses are in building/home automation, datacom/telecom, energy systems, industrial automation, and test and measurement.

Key applications

  • Home Automation, Smart Homes & Smart Offices
  • Industrial High-Power Converters
  • Test and Measurement
  • Renewable Energy
  • Datacom and Telecom