| Featured Power Electronics Products this Week |
|
|
| 1 Kilo-Ohms Thin Film Power Resistor for Medical Applications | |
Power Resistor
from Kyocera AVX
|
| The HR02A102FZTR from Kyocera AVX is a Thin Film Power Resistor that is ideal for multi-chip modules (MCM), bias networks, test and measurement equipment, aerospace, medical, and automotive applications. It has a resistance of 1000 ohms and a resistance tolerance of 1%. This power resistor has a power rating of 125 mW. It has been designed using Kyocera AVX’s proprietary FLEXITERM technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 280 W Poly-Crystalline Solar Panel | |
Solar Panels
from SPS istem
|
| The Polycrystalline Line - 280P from SPS istem is a Polycrystalline Solar Panel. This solar panel provides an output voltage of 31.89 V and an output current of 8.78 A. It delivers an output power of 280 W and has an efficiency of 17.2%. This IEC 61215 and IEC 61730-certified solar panel features an IP67 J-box for weather protection and benefits from anti-reflective coating. It is designed with an anti-hail module and is resistant to salt mist and ammonia. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q200 Qualified Capacitor for High-Density PCB Applications | |
Power Capacitor
from Surge Components
|
| The VZH220M1KTR-0810S from Surge Components is an Automotive Qualified Power Capacitor. It has a capacitance of 22 µF and a capacitance tolerance of ±20%. This capacitor has a voltage rating of 80 V. This AEC-Q200-qualified capacitor operates over a temperature range from -55 °C to +105 °C and offers large capacitance along with very low impedance, making it suitable for various industrial applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Magnetically-Shielded Power Inductor for Handheld Applications | |
Power Inductor
from Cal-Chip Electronics
|
| The CS1608M100T from Cal-Chip Electronics is a Shielded Power Inductor that is ideal for portable telephones, personal computers, DC/DC converters, and other electronic applications. This power inductor has an inductance of 10 µH, an inductance tolerance of ±20%, and a self-resonant frequency of 38 MHz. It has a current rating of 1 A and a DC resistance of less than 0.075 ohms. This RoHS-compliant inductor is manufactured on gold-plated ceramic base. |
| |
Download Datasheet
Product Details | |
|
|
|
| Step-Down Voltage Regulator IC for AI Processor Applications | |
PMIC
from Empower Semiconductor
|
| The EP7010CR from Empower Semiconductor is a Step-Down Voltage Regulator IC that has been designed to offer the industry’s best density, efficiency, transient performance, and dynamic voltage scaling (DVS) from any system input voltage. It requires an input voltage of 1.8 V and provides an output voltage of 0.5 - 1.2 V (at 10 A). This IC offers output voltage set point accuracy of ±1% over PVT with a DVS of up to 6 mV/ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation Hardened DC-DC Converter | |
DC to DC Converter
from Crane Aerospace & Electronics
|
| The MFP0507SF/KL from Crane Aerospace & Electronics is a Radiation Hardened DC-DC Converter that converts an input voltage of 3 - 6 V to an output voltage of 5 V. It delivers an output power of up to 16.5 W and has an efficiency of 92%. This converter features an internal solid-state power switch that provides many benefits including inrush current limiting. It offers adjustable start-up sequencing, remote sensing, and voltage margining. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by APEC 2024 | | APEC 2024 | | The Applied Power Electronics Conference (APEC) focuses on the practical and applied aspects of the power electronics business. Session information and schedules have now been posted, as well as updated information for special events and travel & hotels. Registration for APEC 2024 in Long Beach, CA is now open. Click here to learn more. | | | |
|
|
| 4000 V Recovery Rectifier Diode for 4G/5G Applications | |
Power Diode
from Diotec Semiconductor
|
| The SM4000 from Diotec Semiconductor is a Recovery Rectifier Diode that is ideal for 50/60 Hz mains rectification, high voltage power supplies, smart electricity meters, lighting systems and 4G/5G base stations. It has a forward voltage of less than 2.5 V and a forward current of 1 A. This diode has a reverse voltage of up to 4000 V and a reverse current of less than 5 µA. It offers high power dissipation, board space saving and replaces series connections. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 V N-Channel Enhancement Mode Power MOSFET | |
MOSFET
from Alpha & Omega Semiconductor
|
| The AONA66916 from Alpha & Omega Semiconductor is an N-Channel Enhancement Mode Power MOSFET that is ideal for telecom, solar, and DC-DC applications. It has a drain-source breakdown voltage of over 100 V, a gate threshold voltage of up to 3 V, and a drain-source on-resistance of less than 3.4 milli-ohms. This MOSFET has a continuous drain current of up to 197 A and a power dissipation of less than 300 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Bipolar Operational Amplifier for Audio Applications | |
Power Operational Amplifier
from Nisshinbo Micro Devices
|
| The NL8802ANAE1S from Nisshinbo Micro Devices is a Dual-Channel Operational Amplifier that is ideal for home audio, professional audio, car audio, and portable audio applications. It requires a supply voltage from ±3 V to ±22 V, an input bias current of 0.5 µA, and an input offset current of 10 nA. This op-amp provides an output voltage of ±13 V (channel A) and ±16 V (channel B), an open-loop voltage gain of over 80 dB, and has a common-mode rejection ratio (CMRR) of 115 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| CMOS Linear Voltage Regulator for Power Management Applications | |
LDO Voltage Regulator
from AiT Semiconductor
|
| The A6201AE3R-14A from AiT Semiconductor is a Linear LDO Voltage Regulator for reference voltage source regulation after switching power, power management of MP3, PDA, DSC, mouse, PS2 games, and battery-powered equipment applications. It requires an input voltage of 2.5 - 16 V. This regulator provides an output voltage of 1.2 - 5 V and a dropout voltage of 418 mV. It integrates a precise voltage reference, error amplifier, current limit circuit, and output driver module. |
| |
Download Datasheet
Product Details | |
|
|
|
| 480 V Three-Phase EMI/EMC Filter | |
EMI / EMC Filter
from TE Connectivity
|
| The 6609070-8 from TE Connectivity is a Three-Phase EMI/EMC Filter that has been designed to effectively address EMI and EMC issues in power line applications. It has a voltage rating of up to 480 V, a current rating of 110 A, and a leakage current of less than 0.62 mA. This filter features convenient terminal block input and output termination types, offering easy integration and flexibility in various setups. It excels at providing efficient filtering and meeting stringent industry requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 56 V Power-Over-Ethernet Injector for IP Applications | |
Power Over Ethernet IC
from Tycon Systems
|
| The TP-POE-HP-48GD from Tycon Systems is a Power-Over-Ethernet Injector that is ideal for wireless access points, client devices, IP phones, and security camera applications. It requires an input voltage (AC) of 90 - 264 V and provides an output voltage (DC) of 56 V with a load regulation of up to 5%. This injector accepts data-in from a shielded RJ45 Ethernet port and provides the surge-protected data-out and power on the shielded RJ45 Ethernet output port. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 V AC Voltage Transducer for Tool-Free Parameterization | |
Voltage Transducer
from Phoenix Contact
|
| The 2906244 from Phoenix Contact is an AC Voltage Transducer that has been designed to offer tool-free parameterization and teach-in configuration of the measured value range. It requires an input voltage of 0 - 550 V and a supply voltage of 24 V. This transducer provides an output voltage of 0 - 10 V and an output current of 0 - 20 mA. It can be used the voltage range with a ZERO/SPAN adjustment of ±20% and provides bidirectional output signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wireless Li-ion Charger Receiver Driver IC | |
Wireless Charging IC
from Analog Devices
|
| The LTC4124EV#TRPBF from Analog Devices is a Wireless Li-Ion Charger Receiver Driver IC with low battery disconnect. It requires an input voltage of 2.7 - 5.5 V. This IC includes an negative temperature coefficient (NTC) input for safe temperature-qualified charging and a battery disconnect feature that prevents damage to a battery due to over-discharging. It features pin-selectable charge current (up to 100 mA) and charge voltage to ensure versatility. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W AC-DC Converter for Medical Applications | |
AC to DC Converter
from Delta Electronics
|
| The AB40S1200A from Delta Electronics is an AC-DC Converter that steps down an AC input voltage of 85 - 264 V to a DC output voltage of 12 V. This converter delivers an output power of up to 40 W and has an efficiency of 84%. It features an extended operating temperature range from -40°C to +80°C. This high-performance converter benefits from UL/cUL/IEC/EN 60950-1/UL508 standards approval for industrial safety and UL/cUL/IEC/EN 60601 approval for medical safety. |
| |
Download Datasheet
Product Details | |
|
