| Featured Power Electronics Products this Week |
|
|
| 400 V Triac for High Commutation Applications | |
Triac
from Fagor Electronica
|
| The FT0814DH00TU from Fagor Electronica is a Triac that is ideal for inductive loads and high-commutation applications. It has a break-over voltage of 400 V and a break-over current of less than 84 A. This thyristor has a gate trigger voltage of up to 1.3 V and a gate trigger current of 35 mA. It includes support for glass-passivated junction and can handle a high surge current. This RoHS-compliant triac is available in a through-hole package that measures 29.31 x 10.36 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67-Rated On-Board Battery Charger for 2-Wheeler Applications | |
On-Board Charger
from Axiom Energy Conversion Ltd
|
| The C2EA480020 from Axiom Energy Conversion is an On-Board Battery Charger for electric two-wheeler applications. It requires an AC input voltage of 170 - 275 V and provides a DC output voltage of up to 60 V. This charger consumes less power and is resistant to bumps and vibrations. It benefits from CAN communication and includes over-temperature and battery reverse protection. This charger is available in an IP67-rated module that measures 261 x 141 x 76 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 14.2 kW Li-ion NMC Battery for All-Electric Vehicle Applications | |
Electric Vehicle Battery
from Forsee Power
|
| The ZEN 42 from Forsee Power is a Li-ion NMC Battery for all-electric and hybrid heavy vehicle applications. It has a cell capacity of 42.5 kWh. This battery requires a supply voltage of 644 V and has a current rating (peak) of up to 44 A. It delivers a continuous output power of 14.2 kW and a peak output power of 28.3 kW. This highly reliable and safe battery offers a high energy density of 147 Wh/kg that enables full-day operations with optimized passenger capacity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Programmable Quad 2-Pair Power Sourcing Equipment Controller | |
Power Over Ethernet IC
from Skyworks Solutions
|
| The Si3472A-IM from Skyworks Solutions is a Programmable Quad 2-Pair Power Sourcing Equipment Controller for use in endspans (switches) and midspans (injectors). It requires an input voltage of 50 - 57 V and delivers an output power of up to 45 W. This power sourcing equipment (PSE) is compatible with IEEE 802.3 af and IEEE 802.3 at powered device (PD) loads, and integrates four independent ports, each with the IEEE-required detection and classification functionality. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP6K9K-Rated EV Motor/Inverter for Class 2-6 Vehicle Applications | |
EV Traction Motor
from Dana TM4
|
| The SUMO MD HV2100-6P from Dana TM4 is an EV Motor/Inverter System that has been designed to interface directly with standard rear differentials and/or gearboxes and/or e-axles. It delivers a continuous output power of 130 kW and a peak output power of 250 kW. This motor provides a torque of 685 Nm and has a speed of 3500 rpm. It is based on three/six-phase configuration that supports high voltage power supply and can be used to adjust to the switching frequency. |
| |
Download Datasheet
Product Details | |
|
|
|
| Power Transformer for DC-DC Converter Applications | |
Power Transformer
from Wurth Elektronik
|
| The 749197231 from Wurth Elektronik is a Power Transformer that is ideal for DC-DC conversion applications. It has a current rating of 2.5 A and an insulation test voltage of 500 V. This transformer has an inductance of 36.1 µH, a DC resistance of 51 milli-ohms, and a turns ratio of 1:1:1:1:1:1. It operates over a temperature range from -40°C to +125 °C. This RoHS-compliant flexible transformer is available in a surface-mount package that measures 40.39 x 39.62 x 35.69 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DigiKey | | PD70201 Controller IC | | The PD70201 can be used for IEEE 802.3af and IEEE 802.3at applications. A single PD70201 can be used in 4-pair applications, which consume up to 47.7 W and has several features designed to improve efficiency and reliability.Click here to learn more. | | | |
|
|
| Automotive Qualified P-Channel Enhancement Mode MOSFET | |
MOSFET
from PANJIT Semiconductor
|
| The PJQ4439EP-AU_R2_002A1 from PANJIT Semiconductor is an Automotive Qualified P-Channel Enhancement Mode MOSFET. It has a drain-source breakdown voltage of over -30 V, a gate threshold voltage of -1.8 V, and a drain-source on-resistance of less than 31.2 milli-ohms. This AEC-Q101-qualified MOSFET has a continuous drain current of up to -9 A and a power dissipation of less than 2.5 W. It features a green molding compound as per IEC 61249 standard. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Qualified Dual-Channel High Side Power Switch | |
Power Switch IC
from Diodes Incorporated
|
| The ZXMS82090S14PQ-13 from Diodes Incorporated is an Automotive Qualified Dual-Channel High-Side Power Switch that has been optimized for incandescent lamps, motors, LEDs, relays, fuses, and discrete circuit applications. It requires an input voltage of 5 - 28 V and provides an output current of up to 50 mA. This switch offers reverse battery protection using external components to safeguard against a range of potential hazards. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wire-Bond Thin Film Resistor for Medical Implant Applications | |
Power Resistor
from Kyocera AVX
|
| The WBR0202SD1R001FGW from Kyocera AVX is a Wire-Bond Thin Film Resistor that is ideal for medical implantations, hybrid designs, multi-chip modules (MCM), test and measurement instrumentation, hi-rel microelectronics, RF/microwave communications, and defense applications. It has a resistance of 10 ohms and a resistance tolerance of 1%. This resistor has a temperature coefficient of resistance (TCR) of ±150 ppm/°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 180 V Bidirectional Trigger Diode for High Voltage Applications | |
Sidac
from Zhide Electronic
|
| The K180SA from Zhide Electronic is a Bidirectional Trigger Diode that offers high reliability in high voltage applications. It has a break-over voltage of 180 V and a break-over current of 15 µA. This sidac offers over-voltage protection in crowbar circuits and high forward surge current capability. It eliminates voltage over-shoot caused by fast-rising transients and ensures low reverse leakage current. This RoHS-compliant sidac is available in a surface-mount package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V GaN Enhancement Mode Power Transistor | |
GaN Power Transistor
from Innoscience
|
| The INN650DA140A from Innoscience is a GaN Enhancement-Mode Power Transistor. The transistor has a drain-source breakdown voltage of 650 V, a gate threshold voltage of 1.7 V, and a drain-source on-resistance of 106 milli-ohms. It has a continuous drain current of up to 17 A and a pulsed drain current of less than 32 A. This transistor is designed using Innoscience's GaN-on-Silicon technology. It provides zero reverse recovery charge and requires a very low gate charge. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ethernet Surge Protector for Data Line Protection Applications | |
Surge Suppression IC
from Sola HD
|
| The STC-TEL-200T from Sola HD is an Ethernet Surge Suppression Device that has been designed for telephone and data line protection applications. It requires an input voltage of 220 V and has a current rating of 0.15 A. This suppressor uses an advanced two-stage hybrid design and addresses over-voltage transients with silicon break-over capabilities while mitigating sneak and fault currents with resettable fuses (PTCs). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 3.5 A Inrush Current Limiter for Complex Automation Applications | |
Inrush Current Limiter
from Camtec Power Supplies
|
| The ESB101.05UPS from Camtec Power Supplies is an Inrush Current Limiter that is ideal for high loads in LED applications, complex automation systems, and machine-building applications. It is self-powered and does not require an external power supply. This RoHS-compliant current limiter requires an input voltage (AC) of 184 - 264 V and has a current rating of 3.5 A (RMS) and 5 A (peak). It can offer effective and interference-free operation with capacitive loads. |
| |
Download Datasheet
Product Details | |
|
|
|
| IEEE 802.3 af/at-Compliant Powered Device Controller IC | |
Power Over Ethernet IC
from Analog Devices
|
| The LT4276AIUFD#PBF from Analog Devices is a IEEE 802.3 af/at-Compliant Powered Device Controller IC that is ideal for high power wireless data systems, outdoor security camera equipments, commercial and public information displays, and high temperature applications. It requires an input voltage of up to 60 V and delivers an output power of 90 W. This controller provides a synchronous operation in both forward and flyback topologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Slot PCI Hot Plug Controller IC | |
eFuse IC
from Microchip Technology
|
| The MIC2590B-2YTQ from Microchip Technology is a Dual-Slot PCI Hot Plug Controller that has been designed to support power distribution requirements for peripheral component interconnect (PCI) hot plug-compliant systems. It requires an input voltage of 0.8 - 2.1 V and an input current of up to 5 mA. This eFuse IC supports two independent PCI 2.2 slots and has an SMBus interface for slot power control and status. |
| |
Download Datasheet
Product Details | |
|
