Advanced Energy's Artesyn μMP series GEN II power supply is a digitally configurable power supply with market-leading density and efficiency. It features a very wide 85 to 264 VAC input voltage range and active AC inrush control to automatically limit inrush current at turn-on to 40 A maximum. The unit is housed in a 1U case with 4 or 6 slot card options and power ratings from 400 W to 1600 W (input line and output voltage module dependent). All models have full EN60950 ITE and EN60601 medical safety approvals.
The μMP series GEN II offers 5 narrow range adjustable output modules which cover the range from 0.9 V up to 60 V, along with one wide range module which can be set from 3.3 V to 30 V. It employs active power factor correction to minimize input harmonic current distortion and to ensure compliance with the international EN61000-3-2 standard – they have a power factor of 0.99 typical.
The power supplies meet Military STD shock and vibration and offer optional conformal coating. Compared to GEN 1, the GEN II has superior aesthetics and 36% reduction in noise due to an intelligent fan with speed control and fault status
Key features
- Input Range 85 - 264 VAC 120 - 374 VDC
- Freguency Range 47 - 440 Hz
- Inrush Current 40 A Peak max. (soft start)
- Efficiency Up to 91.5%
- Power Factor 0.99 typ, (n/a for 440 Hz)
- Standby Power uMP10/16 <13 W; uMP04 <6 W
- Leakage Current <400 μA at 264 VAC Input
- Holdover Storage 16.7 mS minimum at 1200 W
- Isolation Meets EN60950; EN60601
- Factory Set Point Accuracy +/- 1%
- V-Program 0 - 5 V input = 0 - 100% output
- Overall Regulation 0.4% or 30 mV, whichever is greater
- RMS Ripple 0.1% or 10 mV, whichever is greater
- P-P Ripple 1.0% or 50 mV, whichever is greater
