| Featured Products this Week |
|
|
| 640 W Bifacial Mono-Crystalline Solar Panel | |
Solar Panels
from Canadian Solar
|
| The CS7N-640MB-AG from Canadian Solar is a Bifacial Mono-Crystalline Solar Panel that is ideal for utility power plant applications. This solar panel requires an input voltage of 37.5 V. It delivers an output power of 640 W and has an efficiency of 20.6%. This solar panel achieves high power and reliability with advanced LID/LeTID mitigation technology, reducing degradation by up to 50%. It is designed to withstand heavy snow loads of up to 5400 Pa. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 V Single-Pole Surge Protection Device | |
Surge Suppression IC
from Prosurge
|
| The G50-150-S-PN50 from Prosurge is a Single-Pole Surge Protection Device that has been designed to guarantee reliability in rugged environments and high-exposure locations. It has a voltage rating of 150 V and a current rating of 50 kA. This surge suppressor has a voltage-level protection rating of up to 1.2 KV with a response time of less than 100 ns. It is non-pluggable and supports encapsulated spark gap (ESG) technology to guarantee reliability during operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 V Medium Voltage Varistor | |
Varistor
from Bourns
|
| The DV20K3225R2 from Bourns is a Medium Voltage Varistor that has been designed to protect electronic equipments against high voltage surges in the medium voltage region. It has an AC voltage rating of 20 V, a DC voltage rating of 26 V, and a clamping voltage of 65 V. This varistor offers excellent transient energy absorption due to improved energy volume distribution and power dissipation. It has a leadless chip form design with zero inductance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Triac for SMPS Applications | |
Triac
from SanRex
|
| The TMG3CQ60C from SanRex is a Triac that is ideal for washing machines, vacuum cleaners, rice cookers, microwave ovens, SMPS, copier machines, motor controls, dimmers, SSR, heater controls, vending machines, and other control applications. It has a break-over voltage of 600 V and a break-over current of less than 3 A. This thyristor has a gate trigger voltage of up to 1.5 V and a gate trigger current of less than 15 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 A Negative Temperature Coefficient Thermistor | |
Inrush Current Limiter
from Cantherm
|
| The MF72-010D15 from Cantherm is a Negative Temperature Coefficient Thermistor that is designed for sensitive electronic applications. It conducts a maximum steady state current of up to 5 A and has a resistance of less than 10 ohms.This thermistor can limit the current surges while a power source is turned, thus providing a fast response to current surges and making it useful for sensitive applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 130 kW IP67-Rated Electric Drive Axle for 5.9M Bus Applications | |
Electric Axle
from Brogen
|
| The C500E from Brogen is an Electric Drive Axle that has been designed for 4.5T lightweight trucks and 5.9M bus automotives. It delivers an output power of up to 130 kW. This axle provides a torque of less than 5068 Nm and has a speed of up to 828 rpm. It consists of a permanent magnet synchronous motor (PMSM) and a drum-based braking system. This electric axle delivers high efficiency while maintaining low noise in an IP67-rated protection enclosure. |
| |
Download Datasheet
Product Details | |
|
|
|
| 138 V Silicon Bilateral Voltage Triggered Switch | |
Sidac
from JieJie Microelectronics
|
| The K1300SA from JieJie Microelectronics Silicon Bilateral Voltage Triggered Switch that has been designed for high-voltage lamp ignitors, natural gas ignitors, gas oil ignitors, high-voltage power supplies, xenon ignitors, over-voltage protectors, pulse generators, and fluorescent lighting ignitor applications. It has a break-over voltage of up to 138 V and a break-over current of less than 50 µA. This sidac boasts exceptional transient surge absorption capability. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by EVS37 | | EVS37 | | EVS37 is the world's largest event, anticipating the growth of E-mobility in 2024. With experts from academia, government, and business active in electric vehicle technology, it seeks to address and shape the historic movement of e-mobility under the tagline of "Electric Waves to Future Mobility." Given the EV revolution advancing at ever-increasing rates, EVS37 plays a vital role as a hub for idea sharing and showcasing the most recent advancements in EV technology. Click here to learn more. | | | |
|
|
| 30 kW AEC-Q100 Qualified Electric Vehicle Traction Motor | |
EV Traction Motor
from Danfoss
|
| The EM-PME375-T150-1500 from Danfoss is an EV Traction Motor that has been designed for generators for diesel-electric/serial hybrid applications, traction/propulsion motors, and generators/motors for parallel hybrid applications. It delivers a continuous output power of 30 kW. This AEC-Q100-qualified motor provides a torque of 191 Nm and has a speed of up to 3000 rpm. It features synchronous reluctance-assisted permanent magnet (SRPM) technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.3 kW Liquid-Cooled On-Board Charger for Aerial Platform Applications | |
On-Board Charger
from ZIVAN
|
| The CT3.3 58.8 V Model from ZIVAN is a Liquid Cooled On-Board Charger that has been designed with a compact and robust design to reduce the installation space and maximize performance. It requires an input voltage (AC) of 85 - 270 V (single-phase) and an input current of 16 A. This charger delivers an output power (DC) of 3.3 kW, an output voltage of 13.7 V, and an output current of up to 37 A. It has high power density and stackability for scalable power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 766 kW Lithium-ion NMC Battery Pack for Hybrid Electric Vehicle Applications | |
Electric Vehicle Battery
from Forsee Power
|
| The ZEN 77 PLUS from Forsee Power is a Lithium-ion NMC Battery System that is ideal for all-electric and hybrid electric vehicle (HEV) applications. It requires a supply voltage of 649 V. This battery pack provides an energy of 536 kWh (7 packs in parallel connection) and has a capacity of 825 Ah (7 packs in parallel connection). It delivers a continuous charging/discharging power of 766 kW and a peak charge/discharge power of 1532 kW. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Automotive Qualified N-Channel Enhancement Mode MOSFET | |
MOSFET
from STMicroelectronics
|
| The STH60N099DM9-2AG from STMicroelectronics is an Automotive-Qualified N-Channel Enhancement Mode Power MOSFET that is ideal for high-efficiency switching applications. It has a drain-source breakdown voltage of over 600 V, a gate threshold voltage of 4 V, and a drain-source on-resistance of less than 99 milli-ohms. This power MOSFET has a continuous drain current of up to 27 A and a power dissipation of less than 179 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q100 Qualified Single-Channel eFuse IC for Switching Applications | |
eFuse IC
from Vishay
|
| The SIPQ32433BDN-T1E3 from Vishay is an Automotive-Qualified Single Channel eFuse IC that has been designed to protect both power sources and downstream circuitries connected to the switch from over-loads, short-circuit, voltage surges, and excessive inrush current. It requires an input voltage of 2.8 - 22 V, has a voltage rating of 28 V, and a current rating of 4.5 A. This eFuse integrates multiple control and protection features. |
| |
Download Datasheet
Product Details | |
|
|
|
| 48-Port IEEE 802.3bt-Compliant Power-Over-Ethernet PSE Controller | |
Power Over Ethernet IC
from Analog Devices
|
| The LTC9102AUKJ#PBF from Analog Devices is a 48-Port IEEE 802.3bt Power-Over-Ethernet PSE Controller that is ideal for PoE power sourcing equipments (PSE) switches/routers and midspan applications. It requires an input voltage of 51-57 V and delivers an output power of 71.3 W. This controller is fully compliant with IEEE 802.3bt Type 3 and 4 PSE and IEEE 802.3at Type 2 PSE standards. It includes up to 48 PSE ports with one power channel per port. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90 W Isolated AC-DC Converter for Medical Applications | |
AC to DC Converter
from Recom Power
|
| The RACM90-12SK/ENC from Recom Power is an Isolated AC-DC Converter that steps down an AC input voltage of 85 - 264 V to a DC output voltage of 12 V. It delivers an output power of up to 90 W and has an efficiency of 87%. This converter is Limited Power Source (LPS)-rated and offers effortless system integration. It has tightly regulated output with onboard dual fuses to provide OVC-III rated surge voltage protection. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 0.33 µH Shielded Power Inductor for IoT Applications | |
Power Inductor
from Abracon
|
| The AOTA-B141206SR33MT from Abracon is a Shielded Power Inductor that is ideal for DC-DC converters, inverters, voltage regulators, consumer electronics, robotics, signal conditioning, instrumentation, control systems, IoT, and industrial applications. It has an inductance of 0.33 µH, a self-resonant frequency (SRF) of 120 MHz, and an inductance tolerance of 20%. This inductor has a saturation current of 5.7 A . |
| |
Download Datasheet
Product Details | |
|
|
|
| 36 V Bidirectional Trigger Diode for AC Switching Applications | |
Diac
from Diotec Semiconductor
|
| The BR100-03LLD from Diotec Semiconductor is a Bidirectional Trigger Diode that is ideal for triggering triacs and thyristors, AC switches and controls, and dimmer circuits applications. It has a break-over voltage up to 36 V and a break-over current of less than 50 µA. This diac has a power dissipation of 150 mW. This RoHS Compliant diac is available in a surface-mount package that measures 3.5 x 1.45 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 550 V Thermally Protected Metal Oxide Varistor | |
Varistor
from Meritek Electronics Corporation
|
| The TPV14N331KS from Meritek Electronics Corporation is a Thermally Protected Metal Oxide Varistor. It has an AC voltage rating of 215 V, a DC voltage rating of 275 V, and a clamping voltage of less than 550 V. This metal oxide varistor offers a high peak surge current handling capability of up to 10 kA in a standard lead-form design. It is available in a thermally enhanced through-hole package that measures 9.1 x 3.3 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Negative Voltage Hot Plug Controller IC for VoIP Applications | |
eFuse IC
from Renesas Electronics
|
| The ISL6141CBZA-T from Renesas is is a Negative Voltage Hot Plug Controller that is ideal for voice-over-internet protocol (VoIP) servers, telecom systems at -48 V, negative power supply control, and +24 V wireless base station power applications. It requires an input voltage from -20 V to -100 V. This eFuse IC features an IntelliTrip electronic circuit breaker that distinguishes between over-current and hard fault conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q200 Qualified Current Sense Transformer | |
Power Transformer
from Coilcraft
|
| The CST3015-400ED from Coilcraft is an Automotive Qualified Current Sense Transformer that is ideal for automotive systems applications. This transformer requires a primary current of 83 A and provides an isolation voltage of 5000 V (RMS). It has an inductance of 51.20 mH and a turns ratio of 1:400. This AEC-Q200-qualified transformer is designed for use over 1 MHz and has very low primary DC resistance. It is available in a surface-mount package that measures 30 x 23 mm. |
| |
Download Datasheet
Product Details | |
|
