| Featured Products this Week |
|
|
| 4-Position Horizontal Through-Board Connector | |
Power Connector
from Harwin
|
| The Harwin M80-5000000M5-04-333-00-000 is a 4-Position Horizontal Through-Board Connector designed for demanding power interconnect applications in aerospace, defence, industrial, and rugged electronic systems. This male power connector features a 4.00 mm pitch, through-hole right-angle mounting, and threaded jackscrews for secure mating under high vibration and shock conditions. It supports up to 20 A per contact with an 800 V voltage rating. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Automotive-Grade SiC MOSFET | |
MOSFET
from SemiQ
|
| The AS2T030A170H from SemiQ is an Automotive-Grade Silicon Carbide MOSFET. It has a drain-source breakdown voltage of over 1700 V, a gate threshold voltage of up to 4 V, and a drain-source on-resistance of less than 36 milli-ohms. This MOSFET integrates a body diode and has an ultra-low switching loss. It has a low gate charge and includes a driver-source pin for optimised gate driving and easy paralleling. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V E-Mode Bi-Directional GaN Transistor | |
GaN Power Transistor
from Infineon Technologies
|
| The IGK048B041S from Infineon Technologies is an E-Mode Bi-Directional GaN Transistor. This JEDEC-qualified transistor has a drain-source voltage of up to 40 V, a gate threshold voltage of less than 2.9 V, and a drain-source on-resistance of 4.2 milli-ohms. It has a continuous drain current of 53 A and a pulsed drain current of 120 A. This normally off transistor offers bidirectional blocking, low on-resistance, low gate charge, and low output charge. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 A DC-DC Step Up Converter | |
DC to DC Converter
from Samlex America
|
| The STEP 10 from Samlex America is a DC-DC Step Up Converter that converts an input voltage of 9-18 VDC to an output voltage of 24 VDC. It delivers an output current of 10 A with an efficiency of up to 92%. This CE-approved converter has a switch-mode design and has very low energy consumption. It includes 6.3 mm push-on flat pin connectors and is protected against overload, short circuit, reverse polarity and high voltage and transient suppression on the input side. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.5 µH Multilayer Metal Power Inductor | |
Power Inductor
from Taiyo Yuden
|
| The LSCND1008HKT1R5MF from Taiyo Yuden is a Multilayer Metal Power Inductor. It has an inductance of 1.5 µH and a tolerance of ±20%. This power inductor has a current rating of 1.2 A and a saturation current of 1.4 A. It has a DC resistance of up to 0.236 ohms and operates at a measuring frequency of 1 MHz. This RoHS-compliant power inductor operates at a wide temperature range of -40 to 125°C. It is available in a surface-mount package. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCIM Asia Shenzhen | | PCIM Asia Shenzhen | | PCIM Asia Shenzhen 2026 is one of the most prevalent exhibitions in China specialising in power electronics and its applications in the fields of intelligent motion, renewable energy and energy management. From latest developments of power semiconductors, passive components, products for thermal management, new materials, sensors as well as servo-technology and the wide area of power quality and energy management. Click here to learn more. | | | |
|
|
| AEC-Q200 Qualified Current Sense Transformers | |
Power Transformer
from Coilcraft
|
| The CSX7030 Series from Coilcraft are AEC-Q200 Qualified Current Sense Transformers that are designed and fabricated for systems mounted in harsh automotive conditions. They offer inductance values from 0.4-6.6 mH and have a DCR rating of less than 0.52 milli-ohms. These RoHS-compliant transformers are built using ferrite core material and can withstand an isolation voltage of 1000 Vrms between primary and secondary windings. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Half-Bridge Silicon Carbide MOSFET | |
MOSFET
from Minebea Power Semiconductor Device
|
| The MSM900GS17CLT from Minebea Power Semiconductor Device is a Half-Bridge Silicon Carbide MOSFET. It has a drain-source voltage of 1700 V, and a gate threshold voltage of up to 3 V. This MOSFET has a drain current of 900 A and an internal gate resistance of 2.4 ohms. It offers ultra-low switching loss and high current density. This MOSFET benefits from a built-in temperature sensor and is equipped with current-sensing terminals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Coreless Current Sensor with External Busbar | |
Current Transducer
from Asahi Kasei
|
| The EZ232L Series from Asahi Kasei are Coreless Current Transducers with external busbars. They have a high resolution of 1 A rms and operate across a temperature range of -40 - 150 °C. These transducers have differential Hall sensing that rejects common-mode magnetic fields. They integrate dual analog outputs for precise control and high-speed overcurrent detection, with sensitivity and offset calibration managed through the SPI interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 A H Bridge Motor Driver IC | |
Motor Driver IC
from Novosense Microelectronics
|
| The NSD7315H-DHTSXR from Novosense is an H-Bridge Motor Driver IC for industrial brushed DC motor applications. It requires an input voltage of 4.5-35 V and delivers a peak output current of up to 10 A using low RDS(ON) MOSFETs. This motor driver supports multiple control modes, including PH/EN, PWM, and independent half-bridge input, enabling bi-directional motor drive or dual solenoid control. It integrates a 4-wire SPI interface for configuration and fault reporting. |
| |
Download Datasheet
Product Details | |
|
|
|
| Metallized Polypropylene Film Power Capacitor | |
Power Capacitor
from Siemens
|
| The 4RB2208-3EE50 from Siemens is a Power Capacitor. It has a capacitance of 114 µF and has a capacitive tolerance of ±5%. This capacitor has a capacitance of 114 µF with a tolerance of ±5% and is rated for operation up to 440 VAC. It delivers 20.8 kvar reactive power at 50 Hz and can withstand short-circuit currents up to 10 kA. This metallized polypropylene (MKP) capacitor features a self-healing dielectric structure for improved operational reliability. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCIM Asia Shenzhen | | |
|
|
| 5 W Modular Switching Power Supply | |
AC to DC Converter
from Astrodyne TDI
|
| The PWB-5001 from Astrodyne TDI is a PowerBlock Micro-Miniature Modular Switching Power Supply that converts universal AC input voltages of 90-264 VAC into a regulated 5 VDC output. It delivers up to 5 W of output power with an output current of 1 A and offers high efficiency of up to 80%. This converter features 3000 VAC input-to-output isolation and has a fixed-frequency switching operation at 100 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q200 Compliant Decoupling Inductor | |
Power Inductor
from TDK Corporation
|
| The ADL4524VL-180M-TL000 from TDK Corporation is an AEC-Q200 Compliant Decoupling Inductor. This wire-wound inductor has an inductance of 18 µH with a tolerance of ±20%. It has a saturation current rating of 510 mA and a DCR of 0.8 ohms. This inductor utilizes an inductance measuring frequency of 100 kHz and operates across a temperature range of -55 to +155 °C. It leverages TDK's proprietary coiled-wiring architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V IGBT Module | |
IGBT
from Micro Commercial Components
|
| The MIF450R12C2TL from Micro Commercial Components is an IGBT that is suitable for an inverter for motor drive, AC and DC servo driver amplifier, UPS (Uninterruptible Power Supplies), and soft switching welding machine applications. This IGBT has a collector-emitter voltage of 1200 V and a gate-emitter threshold voltage of 5.8 V. It has a continuous current of 450 A and a pulsed collector current of 900 A. This IGBT dissipates a total power of 2307 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 330 F High-Power Supercapacitor Cell | |
Supercapacitor
from Skeleton Technologies
|
| The SKELCAP SCA0300 from Skeleton Technologies is a High-Power Supercapacitor Cell developed for AI peak shaving applications in data centres. It has a capacitance of 330 F. This supercapacitor has a voltage rating of 2.85 V and an equivalent series resistance (ESR) of 0.80-1.00 milli-ohms. It benefits from Skeleton’s patented production technology and offers excellent storage life of 10 years. This RoHS-compliant supercapacitor is available in a PCB-mount package. |
| |
Download Datasheet
Product Details | |
|
