| Featured Products this Week |
|
|
| Automotive Qualified LED Driver IC for Interior Lighting Applications | |
LED Driver IC
from Nexperia
|
| The NCR321Z from Nexperia is an Automotive-Qualified LED Driver IC that has been designed to reduce component count and board space and enable high-density packaging in various applications. It requires a supply voltage of up to 16 V. This driver delivers a stabilized output current of 11 mA without using an external resistor. It offers high current accuracy even under varying supply voltage levels and has a high-power dissipation of 1250 mW. |
| |
Download Datasheet
Product Details | |
|
|
|
| Logic Controller High-Side Load Switch for Audio Applications | |
Power Switch IC
from Analog Devices
|
| The ADP196 from Analog Devices is a Logic Controlled High-Side Load Switch that is ideal for digital cameras, audio devices, mobile phones and portable and battery-powered equipment applications. This switch requires an input voltage of 1.8 - 5.5 V and a continuous input current of 3 A. It is designed for power domain isolation that helps to extend battery operation and enhance efficiency. This power switch features an N-channel MOSFET with low on-resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| SiC Junction Field Effect Transistor for DC-AC Inverter Applications | |
Junction Field Effect Transistor (JFET)
from Qorvo
|
| The UJ3N065025K3S from Qorvo is a SiC Junction Field Effect Transistor that is ideal for over-current protection circuits, DC-AC inverters, switch mode power supplies (SMPS), power factor correction modules, motor drives, and induction heating applications. It has a drain-source breakdown voltage of 650 V, a gate threshold voltage of -11.5 V, and a drain-source on-resistance of 22 milli-ohms. This field effect transistor (FET) has a continuous drain current of up to 85 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Phase Leg Trench and Field Stop IGBT | |
IGBT
from Microchip Technology
|
| The APTGL475A120D3G from Microchip Technology Phase leg Trench and Field Stop IGBT Power Module that is ideal for welding converters, switched mode power supplies, uninterruptible power supplies, and motor control applications. It has a collector-emitter breakdown voltage of up to 1200 V, a saturated collector-emitter voltage of 1.8 V, and a gate-emitter voltage of ±20 V. This RBSOA-rated IGBT module has a continuous collector current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microstepping Motor Driver IC for Robotics Applications | |
Motor Driver IC
from Allegro MicroSystems
|
| The A5984GESTR-T from Allegro MicroSystems is a Microstepping Motor Driver IC that has been designed to control bipolar stepper motors from full-step up to 1/32 step modes. It requires an input voltage of up to 40 V and provides an output current of less than 2 A. It utilizes a proprietary adaptive percent fast decay (APFD) algorithm to produce a refined current waveform over a wide range of stepper speeds and stepper motor characteristics. |
| |
Download Datasheet
Product Details | |
|
|
|
| 19 W Power-Over-Ethernet Power Source for Wireless AP Applications | |
Power Over Ethernet IC
from Tycon Systems
|
| The TP-POE-24 from Tycon Systems is a Power-Over-Ethernet Power Source that has been designed to cater to midspan applications while ensuring reliable operation even in the toughest of environments. It requires an input voltage (AC) of 90 - 264 V and delivers an output power of 19 W. This power source works by supplying power to various remote devices on the unused Ethernet pins (4 and 5 (V+) and 7 and 8 (V-)). It accepts data-in from a shielded RJ45 jack. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 V Radiation Hard eGaN Power Transistor | |
GaN Power Transistor
from EPC Space
|
| The EPC7030G from EPC Space is a Radiation Hard eGaN Power Transistor that is ideal for commercial and industrial applications. This transistor has a drain-source voltage of over 300 V, a gate threshold voltage of 1.4 V, and a drain-source on-resistance of less than 32 milli-ohms. It has a continuous drain current of up to 50 A and a pulsed drain current of less than 200 A. This MIL-STD-750-compliant power transistor is available in a surface-mount package. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by POWER ELECTRONICS INTERNATIONAL 2024 | | POWER ELECTRONICS INTERNATIONAL 2024 | | Power Electronics International's mission is to bring together, inform, and inspire the power electronics community. Attendees will have numerous opportunities to network with other key industry players and interact face-to-face with manufacturers of process equipment, materials, and metrology technologies in the exhibition hall at Power Electronics International. Click here to learn more. | | | |
|
|
| AEC-Q100 Qualified Symmetric Gate Driver IC | |
Gate Driver
from Skyworks Solutions
|
| The Si823H2CB-AS1 from Skyworks Solutions is an Automotive-Qualified Symmetric Gate Driver IC that is ideal for power delivery systems, motor control systems, isolated DC-DC power supplies, lighting control systems, solar and industrial inverters, on-board chargers, battery management systems, charging stations, traction inverters, hybrid electric vehicles and battery electric vehicle applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W Pure Sine Wave DC-AC Inverter | |
DC to AC Inverter
from Victron Energy
|
| The 12/500 from Victron Energy is a Pure Sine Wave DC-AC Inverter that converts a DC input voltage of 12 V to an AC output voltage of 230 V. It delivers a continuous output power of 500 VA and a peak output power of 900 W. This inverter can be connected to digital devices through a USB cable or using a Bluetooth Smart Dongle. It has a full bridge plus toroidal transformer topology and includes short circuits, over-heating, and over-temperature protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 V Polypropylene Film Capacitor for Power Supply Applications | |
Power Capacitor
from Rubycon
|
| The 250MPB475J from Rubycon is a Polypropylene Film Capacitor. It has a capacitance of 4.7 µF and a capacitance tolerance of ± 5%. This capacitor has a voltage rating of up to 250 V. It is coated with flame-retardant (UL94 V-0) epoxy resin to enhance its durability and resistance to chemical substances. This RoHS-compliant power capacitor is available in a through-hole package that measures 46 x 23.5 mm and is ideal for power supply applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 µH Magnetically-Shielded High Current Power Choke | |
Power Inductor
from Allied Components International
|
| The PCHC128H-180M from Allied Components International is a Power Choke that has been designed to handle high current levels in a circuit. It has an inductance of 18 µH and an inductance tolerance of ±20%. This choke has a saturation current of up to 5.10 A and a dynamic contact resistance (DCR) of less than 0.035 ohms. It offers a magnetically shielded construction for high reliability and ruggedness, and consists of a Ferrite core. |
| |
Download Datasheet
Product Details | |
|
|
|
| LDO Voltage Regulator for Powertrain Applications | |
LDO Voltage Regulator
from ON Semiconductor
|
| The NCV8774DT50RKG from onsemi is an LDO Voltage Regulator that is ideal for body control modules, instruments and clusters, occupant protection and comfort, and powertrain applications. It requires an input voltage of 4.5 - 40 V. This regulator provides an output voltage of 5 V and has a drop-out voltage of 250 mV. It has a robust design, allowing it to be used in severe automotive environments, and offers an ultra-low quiescent current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 V Schottky Trench Rectifier Diode for LED Lighting Applications | |
Power Diode
from STMicroelectronics
|
| The STPST1H100ZF from STMicroelectronics is a Schottky Trench Rectifier Diode that is ideal for DC-DC converters, LED lighting, flyback topology, auxiliary power supply, and switch-mode power supply applications. It has a forward voltage of up to 0.725 V and a forward current of less than 1 A. This avalanche-tested diode has a reverse voltage of 100 V. It benefits from high junction temperature capability, low forward voltage drop, and low recovery charges. |
| |
Download Datasheet
Product Details | |
|
|
|
| Synchronous Buck DC-DC Converter for Wireless Applications | |
DC to DC Converter
from AiT Semiconductor
|
| The A7222AE6VR from AiT Semiconductor is a Synchronous Buck DC-DC Converter that requires an input voltage of 4.5 - 16 V. This converter has a switching frequency of 500 kHz and an efficiency of up to 96%. It uses 0.6 V reference and slope-compensated current mode control to ensure excellent line and load transient response. This DC-DC converter offers integrated internal compensation and stability with low-ESR ceramic output capacitors. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by POWER ELECTRONICS INTERNATIONAL 2024 | | |
|
|
| 80 V Automotive Qualified Power MOSFET | |
MOSFET
from Infineon Technologies
|
| The IAUCN08S7N013 from Infineon Technologies is an Automotive Qualified Power MOSFET ideal for general automotive applications. It has a drain-source breakdown voltage of over 80 V, a gate threshold voltage of 2.8 V, and a drain-source on-resistance of less than 1.30 milli-ohms. This MOSFET has a continuous drain current of up to 274 A and a power dissipation of less than 219 W. It features enhanced electrical testing and a robust design. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 kW Isolated AC-DC Converter for Healthcare Applications | |
AC to DC Converter
from XP Power
|
| The HPF3K0PS24 from XP Power is an Isolated AC-DC Converter that steps down an AC input voltage of 180 - 264 V to a DC output voltage of 24 V. It delivers an output power of up to 3 kW and has an efficiency of 90.3%. This converter has programmable output voltage and current with intelligent controls to provide precise control over voltage and current levels without compromising power efficiency. It supports parallel operation and hence can regulate load current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 120 V Silicon Epitaxial NPN Transistor for High-Speed Switching Applications | |
Bipolar Junction Transistor
from Toshiba
|
| The TTC023 from Toshiba is an NPN Bipolar Transistor that is ideal for DC-DC converters and high-speed switching applications. It has a collector-emitter breakdown voltage of over 120 V, base-emitter voltage of up to 7 V, and a saturated collector-emitter voltage of 0.05 V. This transistor has a collector current of up to 3 A and a base current of less than 0.3 A. It can switch at a high speed with a rise time of 25 ns and fall time of 170 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| CMOS Ultra-Low Power Voltage Regulators for Wearable Applications | |
LDO Voltage Regulator
from Nisshinbo Micro Devices
|
| The NR1620 Series from Nisshinbo Micro Devices are CMOS Ultra-Low Power Voltage Regulators that are ideal for wearable devices such as smartwatches, smart bands, health monitoring, lithium-ion battery equipment, coin cell battery equipment, low-power CPUs, memory, sensor devices, and energy harvesting applications. They require an input voltage of 2.4 - 5.5 V. These regulators provide an output voltage of 1.2 V, and an output current of 150 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 530 W IP68-Rated Mono-Crystalline Solar Panel | |
Solar Panels
from AfriSol Power
|
| The ASP-530W-144M from AfriSol Power is a 144-Cell Mono-Crystalline Solar Panel that is ideal for utility power plant applications. This solar panel provides an output voltage of 40.58 V. It delivers an output power of 530 W and has an efficiency of 20.51%. This solar panel achieves high power and reliability with advanced PERC cell technology. It has less hotspot shading effects, which improves the efficiency and longevity of the solar array. |
| |
Download Datasheet
Product Details | |
|
