| Featured Products this Week |
|
|
| 1.5 kW True Sine Wave Power Inverter for Telecom Applications | |
DC to AC Inverter
from Mean Well
|
| The NTS-1700-112GFCI from Mean Well is a True Sine Wave Power Inverter that converts a DC input voltage of 12 V to an AC output voltage of 100 - 120 V. It delivers an output power of 1500 W (continuous) and 3000 W (peak) and has an efficiency of up to 89 %. This DC-AC inverter features a digital design with MCU control, streamlined control circuitry that quickly responds to environmental changes and a high-quality fan with low acoustic noise. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W Isolated AC-DC Converter for Industrial Applications | |
AC to DC Converter
from MORNSUN
|
| The LHE40-23B05 from MORNSUN is an Isolated AC-DC Converter that steps down an AC input voltage of 85 - 305 V to a DC output voltage of 5 V. It also accepts a DC input voltage of 100 - 430 V. This converter delivers an output power of up to 40 W and has an efficiency of 82%. It provides an isolation of up to 4000 V (test voltage) and is equipped with output short-circuit protection, over-current protection, and over-voltage protection to prevent damage. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB PD and Type-C Current Limit Power Switch | |
Power Switch IC
from NXP Semiconductors
|
| The NX5P3363UK from NXP Semiconductors is a Current Limit Power Switch that has been designed for USB PD applications. It requires an input voltage of 4 - 5.5 V. This power switch has a built-in RCP recovery circuit for reverse current protection and reduces the voltage drop in a power source swap application. It has a programmable over-current limit threshold from 400 mA to 3.3 A, effectively clamping the output current to a safer threshold using an external resistor. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q101 Qualified P-Channel Enhancement Mode MOSFET | |
MOSFET
from Littelfuse
|
| The IXTY2P50PA from Littelfuse is an AEC-Q101 Qualified P-Channel Enhancement Mode Power MOSFET that is ideal for high-side switches, push-pull amplifiers, DC choppers, automatic test equipment, and current regulator applications. It has a drain-source breakdown voltage of up to -500 V, a gate threshold voltage of less than -2.5 V, and a drain-source on-resistance of 4.2 ohms. This power MOSFET has a continuous drain current of up to -6 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Single Switch IGBT for Brake Chopper Applications | |
IGBT
from Semikron
|
| The SKM1400GAR17R8 from Semikron is a Single Switch IGBT that is ideal for brake chopper and wind turbine applications. It has a saturated collector-emitter voltage of 1.63 V, a collector-emitter breakdown voltage of up to 1700 V, and a gate threshold voltage of 5.8 V. This IGBT has a collector current of less than 2337 A. It provides symmetrical current sharing across the circuit and has a low-inductive module design for high efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Enhancement Mode GaN Power Transistor for SMPS Applications | |
GaN Power Transistor
from Infineon Technologies
|
| The IGLR60R260D1 from Infineon Technologies is an Enhancement Mode GaN Power Transistor. This transistor has a drain-source voltage of up to 600 V, a gate threshold voltage of less than 1.6 V, and a drain-source on-resistance of 370 milli-ohms. It has a continuous drain current of up to 10.4 A and a pulsed drain current of less than 15.9 A. This normally-off GaN transistor has a low gate charge and output charge in addition to zero reverse-recovery charge. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W WPC Qi 1.2-Compliant Wireless Power Receiver IC | |
Wireless Charging IC
from Renesas Electronics Corporation
|
| The P9221-R3 from Renesas is a Wireless Power Receiver IC that is compliant with the WPC Qi 1.2 specifications. It delivers an output power of 15 W. This receiver integrates a 32-bit ARM Cortex-M0 processor, a synchronous rectifier, and an ultra-low dropout regulator, making it ideal for high-efficiency, space-constrained receiver applications. It offers bi-directional data communication without requiring additional circuitry. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DigiKey | | 150V Gen V SiR578DP MOSFETs | | Delivers increased power density and efficiency for isolated and non-isolated topologies. Combining ultra-low on-resistance, high-temperature operation up to 175°C, and their space-saving package helps promote board-level reliability. Click here to learn more. | | | |
|
|
| -500 V Automotive Qualified PNP Transistor | |
Bipolar Junction Transistor
from Nexperia
|
| The PBHV9040T-QR from Nexperia is an Automotive Qualified PNP Transistor that is ideal for electronic ballasts, LED driver for LED chain modules, LCD backlighting, automotive motor management, hook switch for wired telecom, flyback converters, and switch mode power supply (SMPS) applications. It has a collector-emitter breakdown voltage of up to -500 V and an emitter-base voltage of less than -6 V. This transistor has a base current of up to -200 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| WPC Qi-Compliant Wireless Charging Transmitter Coil | |
Wireless Charging Coil
from Wurth Elektronik
|
| The 760308100143 from Wurth Elektronik is a Wireless Power Transfer Transmitter Coil that is compliant with WPC Qi specifications. It has an inductance of 6 µH and an inductance tolerance of ±10%. This transmitter coil has a quality factor of 180 and a self-resonant frequency (SRF) of 16 MHz. It has a current rating of 12 A and a dynamic contact resistance (DCR) of less than 18 milli-ohms. It employs litz wire and has a greater permeability shielding. |
| |
Download Datasheet
Product Details | |
|
|
|
| 802.3af-Compliant Gigabit Power-Over-Ethernet Injector | |
Power Over Ethernet IC
from Microchip Technology
|
| The PD-3501G/AC-BR from Microchip Technology is an 802.3af-Compliant Single-Port Power-Over-Ethernet Injector that has been designed to offer a compact and cost-effective solution for powering IP phones, WLAN access points, network cameras, and other IP terminal devices. It requires an input voltage (AC) of 100-240 V and an input current of 0.43 A. This power-over-ethernet (PoE) delivers an output power of 15.4 W and a data rate of 10/100/1000 Mbps. |
| |
Download Datasheet
Product Details | |
|
|
|
| Li-ion Battery Pulse Charger for Cellular Applications | |
Battery Management IC
from Analog Devices
|
| The LTC1732EMS-8.4#PBF from Analog Devices is a Li-ion Battery Pulse Charger that offers a complete pulse charging solution for 2-cell Li-ion batteries. It requires an input voltage of 8.8 - 12 V and an input current of up to 3 mA. It features C/10 charge current detection output, programmable charge termination timer, and supports constant-current-only mode when required. This charger offers automatic sleep mode upon input supply removal. |
| |
Download Datasheet
Product Details | |
|
|
|
| EV Traction Motor for Power Generation Applications | |
EV Traction Motor
from Cascadia Motion
|
| The SS-250-115 from Cascadia Motion is an EV Traction Motor that has been designed for use in on- and off-road highway vehicles, power generation, and other special high-power applications. It delivers a peak output power of 375 kW. This motor provides a torque up to 500 Nm and has a speed of less than 12000 rpm. It includes an oil pump, sump, and integral oil-to-water heat exchanger, with external oil auxiliary connection points provided but not necessary for operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 kW IP-Rated Electric Transaxles for Logistics Applications | |
Electric Axle
from e-comer
|
| The TX2 Series from e-comer are Electric Tranxaxles that are ideal for construction, logistics, agriculture, cleaning, and e-mobility applications. They deliver a continuous output power of 10 kW and a peak output power of up to 15 kW. These transaxles provide a torque of 1 Nm and have a speed of 7.2 rpm. They consist of a Class 5 gearbox and integrate an AC induction/PMAC that operates based on Hall Effect 64 pulse. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1500 A AC/DC Current Transducer | |
Current Transducer
from Danisense
|
| The DM1200ID-CD3000 from Danisense is an AC/DC Current Transducer that has been designed to measure current levels of up to 1500 A with a linearity error of less than 3 ppm. This current transducer is based on Fluxgate closed loop compensated technology with crystal-driven excitation frequency to offer ultra stability with greater precision. It offers 3000 turns calibration winding in DSUB connector which can be useful to perform current calibration with 500 mA source. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1.5 Kilo-Ohms Automotive Qualified Thin Film Chip Resistor | |
Power Resistor
from Susumu International
|
| The RT0603R-152-M from Susumu International is an Automotive Qualified Metal Thin Film Chip Resistor that has been designed to provide high accuracy and anti-vibration stability for sensor circuits, PA modules of mobile phones, and other electronic devices. It has a resistance of 1.5 kilo-ohms and a resistance tolerance of ±20 %. This AEC-Q200-qualified chip resistor has a voltage rating of 15 V and a power rating of 0.05 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 kW On-Board Charger for Hybrid Electric Vehicle Applications | |
On-Board Charger
from Depowersupply Electrical
|
| The OBC4815-D from Depowersupply Electrical is an On-Board Charger that is ideal for electric vehicle (EV) and hybrid electric vehicle (HEV) applications. It requires an AC input voltage of 110 - 220 V. This charger delivers a DC output power of up to 1000 W and provides a charging current of 8 A. This charger is fitted with a detachable waterproof connector, which can be connected to various plug types from US, Euro, AU, and others. |
| |
Download Datasheet
Product Details | |
|
|
|
| 228 Ah Thermally-Stable LiFePO4 Battery System | |
Electric Vehicle Battery
from Canadian Electric Vehicles
|
| The C10-LFP228S from Canadian Electric Vehicles is a LiFePO4 Battery System that has been designed to offer excellent thermal and chemical stability for improved safety. It has energy of over 659.2 Wh and provides a capacity of more than 228 Ah. This battery has a charging voltage of up to 3.65 V and a continuous charging and discharging current of less than 1C. It offers a modular prismatic design that helps fit into many applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 kW Compact and Lightweight Electric Axle | |
Electric Axle
from AISIN
|
| The eAxle 150kW from AISIN is an Electric Axle that has been designed for front-wheel and rear-wheel drive in automobiles. It delivers an output power of 150 kW. This e-Axle combines a high-efficiency 3-axis gear train and an optimized motor to realize a compact size, lightweight and highly efficient unit that can be easily mounted on the front or rear side of the electric vehicle. It is ideal for bZ4X (Toyota) and SOLTERRA (SUBARU) applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Bidirectional Triode Thyristor for Industrial Applications | |
Triac
from Digitron Semiconductors
|
| The T6421MHR from Digitron Semiconductors is a Bidirectional Triode Thyristor that is ideal for industrial and commercial applications for full wave control of AC loads, control circuits, heater and motor controls, and other switching applications. It has a break-over voltage of up to 600 V and a break-over current of less than 300 A. This MIL-PRF-19500 standard thyristor has a gate trigger voltage of up to 1.35 V and a gate trigger current of 35 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Planar Passivated Thyristor for Lighting Applications | |
Silicon Controlled Rectifier
from WeEN Semiconductors
|
| The BT152B-600R from WeEN Semiconductors is a Planar Passivated Thyristor for use in applications requiring high bidirectional blocking voltage capability and high thermal cycling performance. It has a break-over voltage of up to 650 V and a break-over current of less than 200 A. This rectifier has a gate trigger voltage of up to 1.5 V and a gate trigger current of less than 32 mA. It is available in a through-hole package that measures 11.0 x 10.3 x 4.7 mm. |
| |
Download Datasheet
Product Details | |
|
