| Featured Products this Week |
|
|
| 200 V Superfast Recovery Rectifier Diode for Industrial Applications | |
Power Diode
from Diotec Semiconductor
|
| The ER1D-AQ from Diotec Semiconductor is a Superfast Recovery Rectifier Diode that is ideal for the rectification of higher frequencies, high-speed switching, and commercial and industrial applications. It has a forward voltage of 1 V and a forward current of up to 1 A. This REACH-compliant power diode has a repetitive peak reverse voltage of less than 200 V and a reverse current of less than 5 µA. It has a very low reverse recovery time and low forward voltage drop. |
| |
Download Datasheet
Product Details | |
|
|
|
| Lithium-ion Battery Pack Fuel Gauge IC for UPS Applications | |
Battery Management IC
from Monolithic Power Systems
|
| The MPF42793DRT-0B-0000-Z from Monolithic Power Systems is a Battery Pack Fuel Gauge IC that has been designed to provide comprehensive status information on lithium-ion battery strings up to 16 series cells. It requires an input voltage of 3 - 3.6 V. This IC estimates the internal state-of-charge (SOC) and state-of-health (SOH) for each cell, as well as the full pack along with determining impedance, remaining runtime, charge time, and available power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12.4 V AC-DC Converter for Defense Applications | |
AC to DC Converter
from POWERBOX
|
| The ECD500A12 from POWERBOX is an AC-DC Converter that steps down an AC input voltage of 85 - 305 V to a DC output voltage of 12.4 V. It has an efficiency of up to 87%. This converter offers a robust solution in the form of a single-output AC/DC baseplate power supply. It is designed to comply with MIL-STD 461 standards and is offered as an off-the-shelf solution, making it suitable for use in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Push-Pull Isolation Transformer for Factory Automation Applications | |
Power Transformer
from Bourns
|
| The SM91207L-E from Bourns is a Push-Pull Isolation Transformer that is ideal for photovoltaic inverters, protective relays, factory automation, low/medium risk medical equipment, motor drivers: IGBT and SiC gate driver power supplies, isolation power supply for Controller Area Network (CAN), and low-power LAN applications. It has a primary voltage of 24 V and has an inductance of 430 µH. This transformer has a DC resistance of up to 0.4 ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 360 W Waterproof On-Board DC-DC Converter | |
On-Board Charger
from Recom Power
|
| The RMOD360-80-24.5SUW/F/MO from Recom Power is an On-Board DC-DC Converter that converts an input voltage of 18 - 106 V to an output voltage of 24.5 V. It delivers an output power of 360 W and has an efficiency of 89%. This converter is an extremely robust plug-and-play module that generates an isolated low-voltage network from the traction battery level. It can be used to sufficiently power all off-highway equipment operating at common battery voltage levels. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90 dB CMOS Rail-to-Rail Operational Amplifier | |
Power Operational Amplifier
from AiT Semiconductor
|
| The AO2325J8R from AiT Semiconductor is a CMOS Rail-to-Rail Operational Amplifier that is ideal for sensors, active filters, cellular phones, cordless phones, laptops, PDAs, handheld test equipment, battery-powered instrumentation and analog-to-digital converter (ADC) applications. It requires a supply voltage of 2.1 - 5.5 V and an input bias and offset current of 1 pA. This op-amp provides an output voltage of 0.1 V and an output current of 70 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.2 µH Shielded Power Inductor for Industrial Applications | |
Power Inductor
from knitter-switch
|
| The ICSI22270639SHMST12 from knitter-switch is a Shielded Power Inductor that is ideal for industrial and commercial applications. This inductor has an inductance of 2.2 µH and an inductance tolerance of ±20%. It has a current rating of 14 A and a dynamic contact resistance (DCR) of 28 milli-ohms. This RoHS-compliant inductor features a carbonyl powder core with polyester wires, halogen-free and ketone-based ink, and an epoxy resin coating. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| DC Voltage Transducer | |
Voltage Transducer
from Ohio Semitronics
|
| The VT7-001E from Ohio Semitronics is a DC Voltage Transducer that is ideal for accurate measurement and isolation of DC voltage and shunt isolator applications. It requires an input voltage of 0 - 10 V and provides an output current of 4 - 20 mA. This voltage transducer can also be used to monitor AC and non-sinusoidal waveforms besides conducting DC measurements. It has undergone a 2500 V (AC) dielectric test to ensure proper isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 545 W Bifacial Mono-Crystalline Solar Panel | |
Solar Panels
from Canadian Solar
|
| The CS6W-545MB-AG from Canadian Solar is a Bifacial Mono-Crystalline Solar Panel that has been designed to deliver linear output power over a long period. It delivers an output power of 545 W and has an efficiency of 21.1%. This solar panel requires a supply voltage of 41.5 V and a supply current of 13.14 A. It reduces the system cost by up to 5.2% and is compatible with mainstream trackers, resulting in a cost-effective product for utility power plant applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Power MOSFET for SMPS Applications | |
MOSFET
from Vishay
|
| The SiHR080N60E-T1-GE3 from Vishay is a Power MOSFET that is ideal for server and telecom power supplies, switch mode power supplies (SMPS), power factor correction power supplies (PFC), high-intensity discharge (HID, fluorescent ballast lighting, welding, Induction heating, motor drives, battery chargers, and solar PV inverters applications. It has a drain-source breakdown voltage of 600 V, a gate threshold voltage of less than 5 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 17 W Space-Qualified Buck DC-DC Converter | |
DC to DC Converter
from VPT
|
| The SLNP17-100CQ from VPT is a Space Qualified Buck DC-DC Converter that converts an input voltage of 96 - 103 V to an output voltage of 5 - 8 V. It delivers an output power of up to 17 W and has an efficiency of 71.6%. This multi-stage converter offers resilience in harsh radiation environments through the use of radiation lot acceptance tested (RLAT) components for consistent performance. It boasts exceptional noise rejection capabilities. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 kW True Sine Wave Power Inverter for Power Tool Applications | |
DC to AC Inverter
from Mean Well
|
| The NTN-5K-124 from Mean Well is a True Sine Wave Power Inverter that converts a DC input voltage of 24 V to an AC output voltage of 110 V. It delivers an output power of 4000 W (continuous) and 6000 W (peak) and has an efficiency of up to 89%. This DC-AC inverter combines AC utility, battery power source and solar charger to supply AC output to the load. It features an AC utility charger up to 135 A and an AC-bypass UPS function without interruption. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32 V Diac for Gate Control Applications | |
Diac
from Fagor Electronica
|
| The FD0200YM00AM from Fagor Electronica is a Diac that is ideal to be used as a trigger diode with a fixed voltage reference in conjunction with triacs for gate control circuits, starting element in fluorescent lamp ballast, universal-motor speed control and heat control applications. It has a break-over voltage of 32 V and a break-over current of less than 2 A. This diac offers bidirectional protection with excellent symmetry and ensures low break-over and leakage current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2500 V Fast Switching Thyristor for Battery Charging Applications | |
Silicon Controlled Rectifier
from MS Power
|
| The MS TF2825C24F2G from MS Power is a Fast-Switching Thyristor that is ideal for battery chargers, medical equipment, UPS, power supplies, motor control, transportation, induction heating, and welding applications. It has a break-over voltage of up to 2500 V and a break-over current of less than 56 kA (on-state surge). This thyristor has a gate trigger voltage of up to 4.5 V and a gate trigger current of 450 mA. It provides complete blocking across a broad temperature span. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 200 V Bidirectional Sidac for Switching Applications | |
Sidac
from Shindengen America
|
| The K1V22 from Shindengen America is a Bidirectional Sidac that has been designed to give direct switching with commercial power sources. It has a break-over voltage of over 200 V and a break-over current of less than 0.5 mA. This RoHS-compliant sidac delivers enhanced reliability and generates a broad spectrum of pulse signals suitable for various applications. It is available in a through-hole package that measures 60 x 4.4 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 V Triac for Motor Pump Applications | |
Triac
from WeEN Semiconductors
|
| The ACT108-600E from WeEN Semiconductors is a Triac that is ideal for fan motor circuits, pump motor circuits, and low-power highly inductive, resistive, and safety load applications. It has a break-over voltage of 800 V and a break-over current of less than 13 A. This thyristor has a gate trigger voltage of over 0.15 V and a gate trigger current of less than 10 mA. It is designed to provide self-protective capabilities against low and high-energy voltage transients. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16-Channel LED Driver IC for LED Backlight Applications | |
LED Driver IC
from Analog Devices
|
| The LT3745EUJ-1#PBF from Analog Devices is a 16-Channel LED Driver that has been designed for large-screen display LED backlighting, mono-, multi-, full-color LED displays, LED billboards and signboard systems. It requires an input voltage of 6 - 55 V. This LED driver lights up to 75 mA/36 V of LEDs in series per channel and has a buck controller that generates an adaptive bus voltage supplying the parallel LED strings. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3-Phase Brushless DC Motor Controller for Variable-Speed Drive Applications | |
Motor Driver IC
from Infineon Technologies
|
| The IMC302AF064XUMA1 from Infineon Technologies is a Three-Phase Brushless DC Motor Controller that has been designed for controlling three-phase motors. It requires an input voltage of 3 - 5.5 V and provides an output current of 260 mA. This motor driver IC consists of a 32-bit ARM Cortex-M0 core, RAM, flash memory, an iMOTION control engine, Universal serial interface channels (USIC) and a 12-bit analog-to-digital converter (ADC). |
| |
Download Datasheet
Product Details | |
|
|
|
| 370 F Snap-in Cylindrical Supercapacitor | |
Supercapacitor
from Eaton
|
| The XT3560-3R0377-R from Eaton is a Snap-in Cylindrical Supercapacitor that is ideal for industrial backup/ride-through, energy storage for UPSs, automotive pulse power, and medical equipment pulse power applications. It has a capacitance of 370 F and a voltage rating of 3 V. This RoHS-compliant supercapacitor has an equivalent series resistance (ESR) of less than 3.2 milli-ohms. It employs electrochemical double-layer capacitor (EDLC) construction. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Speed Quad-Channel Operational Amplifier | |
Power Operational Amplifier
from Renesas
|
| The UPC844G2-E2-A from Renesas is a High-Speed Quad-Channel Operational Amplifier that has been designed to realize high-speed response time and stability in applications. It requires a supply voltage of 3 - 32 V, an input offset current of ±6 nA, and an input bias current of ±140 nA. This op-amp provides a large signal voltage gain of 300 V/mV and has a common-mode rejection ratio (CMRR) of 86 dB. It offers a channel-to-channel isolation of 120 dB. |
| |
Download Datasheet
Product Details | |
|
