| Featured Products this Week |
|
|
| Automotive Qualified Electrostatic Discharge Protection Diode | |
Power Diode
from Micro Commercial Components
|
| The ESDULC5V0PUBWFHE3-TP from Micro Commercial Components is an Automotive-Qualified Electrostatic Discharge Protection Diode. It has a reverse voltage of 6 V and a reverse current of 0.2 µA. This AEC-Q101-qualified power diode can handle a peak pulse current of 4 A. It has an ultra-low capacitance and low clamping voltage. This RoHS-compliant diode is available in a surface-mount package that measures 1.15 x 1.05 x 0.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 nH Wire-Wound Chip Power Inductor | |
Power Inductor
from Kyocera AVX
|
| The LCWC0402K10NGTAR from Kyocera AVX is a Wire Wound Chip Power Inductor. This inductor has an inductance of 10 nH and an inductance tolerance of ±10%. It has a current rating of up to 480 mA and a dynamic contact resistance (DCR) of 0.2 ohms. This REACH-compliant inductor has a ceramic base that offers high self-resonant frequency. It has endurance from pull-up force, mechanical shock and pressure and provides high Q factors. |
| |
Download Datasheet
Product Details | |
|
|
|
| WPC Qi-Compliant Wireless Power Transfer Transmitter Coil | |
Wireless Charging Coil
from Wurth Elektronik
|
| The 760308101103 from Wurth Elektronik is a Wireless Power Transfer Transmitter Coil that is compliant with WPC Qi specifications. It has an inductance of 6.5 µH, an inductance tolerance of ±10%, and a self-resonant frequency (SRF) of 20 MHz. This transmitter coil has a dynamic contact resistance (DCR) of less than 200 milli-ohms and a quality factor of 35. It is available in a through-hole package that measures 30.5 x 28.0 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bidirectional Battery Management IC for Tablet PC Applications | |
Battery Management IC
from Monolithic Power Systems
|
| The MP2755GC-0000-Z from Monolithic Power Systems is a Bi-Directional Battery Management IC that has been designed for 2-cell Li-ion or Li-polymer batteries. It requires an input voltage of less than 20 V. This IC utilizes an inductor-less switched-capacitor architecture, providing an output current of up to 10 A in forward mode and a charging current of 5 A in the reverse mode. It includes a shipping mode function that can shut down the output. |
| |
Download Datasheet
Product Details | |
|
|
|
| 160 kW Electric Drive Axle for 6T Light Truck Applications | |
Electric Axle
from Brogen
|
| The C635F from Brogen is an Electric Drive Axle that has been designed for 6T lightweight truck automotive applications. It delivers an output power of up to 160 kW. This axle provides a torque of less than 6335 Nm and has a speed of up to 789 rpm. It integrates a permanent magnet synchronous motor (PMSM) for providing high efficiency in a lightweight design configuration. This IP67-rated electric axle accommodates a hydraulic drum/disc-based braking system. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Radiation-Hardened Isolated Buck DC-DC Converter | |
DC to DC Converter
from Microchip Technology
|
| The LE50-28-12S-A-T from Microchip Technology is a Radiation-Hardened Buck DC-DC Converter that converts an input voltage of 22 - 38 V to an output voltage of 12 V. It delivers an output power of up to 50 W and has an efficiency of 80% (full-load). This isolated converter provides a radiation-tolerant option with top-class total ionizing dose (TID) and single-event effects (SEE) performance for space and military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bidirectional DC Voltage Transducer for Battery Ground Monitoring Applications | |
Voltage Transducer
from Ohio Semitronics
|
| The DVT7X5 from Ohio Semitronics is a Bidirectional DC Voltage Transducer that has been designed to perform DC voltage measurements. It requires an input voltage of up to 600 V and provides an output voltage of 0 V to ±5 V. This IP20-rated voltage transducer provides exceptionally accurate output voltage levels from zero to full scale (FS) due to complete electrical isolation between the input, output, and instrument power source ports. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PEMD 2024 | | PEMD 2024 | | PEMD is a world-leading forum on power electronics, machines and drives, where industry and academia converge to network, publish results of exciting new research, showcase technical advances, and share knowledge with a growing community.The high-quality, technically focused program includes peer-reviewed paper sessions, keynote addresses from thought leaders, industry briefing sessions, and interactive tutorials. Click here to learn more. | | | |
|
|
| 4.7 Kilo-Ohms Wire-Wound Power Resistor | |
Power Resistor
from TE Connectivity
|
| The SBCHE64K7J from TE Connectivity is a Wire-Wound Power Resistor that is ideal for industrial applications. It has a resistance of 4.7 kilo-ohms and a resistance tolerance of 5%. This resistor has a power rating of 7 W. It has a temperature coefficient of resistance of ±200 ppm/°C and operates over a temperature range from -55°C to +350°C. This RoHS-compliant power resistor is available in a through-hole package that measures 38 x 7 x 8 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 265 V Bidirectional Silicon Controller Rectifier | |
Silicon Controlled Rectifier
from Diodes Incorporated
|
| The TB2300L-13-F from Diodes Incorporated is a Bidirectional Surge Protection Silicon Controlled Rectifier that is ideal for power distribution systems and a broad range of applications. It has a break-over voltage of up to 265 V and a break-over current of less than 800 mA. This rectifier features oxide-glass passivated junctions that provide bidirectional protection in a single unit. This lead-free SCR ensures high off-state impedance and low on-state voltage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 61.5 µF Power Film Capacitor | |
Power Capacitor
from Siemens
|
| The 4RB2208-3GA50 from Siemens is a Power Film Capacitor. It has a capacitance of 61.5 µF and a capacitance tolerance from -5% to +10%. This capacitor has a voltage rating of up to 600 V. It is designed with a self-healing metalized polypropylene film as dielectric and is filled with non-PCB, soft biodegradable resin to provide low dielectric losses, high insulation resistance, high stability over a wide temperature range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 670 W IP68-Rated Bifacial Mono-Crystalline Solar Panel | |
Solar Panels
from Canadian Solar
|
| The CS7N-670MB-AG from Canadian Solar is a Bifacial Mono-Crystalline Solar Panel that has been designed to offer a better shading tolerance with a reduced system cost of up to 4.6%. It delivers an output power of 670 W and has an efficiency of 21.6%. This solar panel requires a supply voltage of 38.7 V and a supply current of 17.32 A. It offers a comprehensive set of LID/LeTID mitigation capabilities that lowers degradation by up to 50%. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Cell Li-ion/Li-Polymer Rechargeable Battery Protection IC | |
Battery Management IC
from Nisshinbo Micro Devices
|
| The NB7120ZA105DHE2S from Nisshinbo Micro Devices is a Single-Cell Li-ion/Li-Polymer Rechargeable Battery protection IC that that is ideal for hearable wearable devices, smartphones, and handheld data terminal applications. This battery protection IC requires an input voltage of 1.5 - 5 V. It features high accuracy over-charge/discharge, over-current, and temperature protection capabilities for external high-side FET transistors and sense resistors. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Voltage Precision Power Operational Amplifier | |
Power Operational Amplifier
from AiT Semiconductor
|
| The AO1007M8R from AiT Semiconductor is a High Voltage Single Precision Power Operational Amplifier that is ideal for wireless base station control circuits, optical network control circuits, instrumentation, sensors and controls, precision filters, cellular and cordless phones, and medical applications. It requires a supply voltage of 3.3 - 32 V and an input bias and offset current from -10 pA to +10 pA. It delivers a large signal voltage gain of 150 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Triac for Switching Applications | |
Triac
from Digitron Semiconductors
|
| The T2500MHR from Digitron Semiconductors is a Triac that is ideal for full wave control of AC loads, in control circuits, heater and motor controls, and other switching applications. It has a break-over voltage of 600 V and a break-over current of less than 60 A. This RoHS-compliant thyristor has a gate trigger voltage of up to 1.25 V and a gate trigger current of 10 mA. It has a reduced conduction loss that makes it suitable for highly reliable military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 180 A AC Current Transducer for Rectifier Applications | |
Current Transducer
from Yuanxing Electronics
|
| The HAT-3X150P3/A0 from Yuanxing Electronics is an AC Current Transducer that has been designed to measure AC current in the range of 180 A and produce a standard DC signal. It requires a supply voltage from ±12 V to ±15 V and an input current of 150 A. This transducer provides an output voltage with an accuracy of 0.5%. This current transducer highly isolates the primary coil from the secondary coil. |
| |
Download Datasheet
Product Details | |
|
|
|
| 45 V Bidirectional Trigger Diode for Dimmer Circuit Applications | |
Diac
from Diotec Semiconductor
|
| The BR100-04LLD from Diotec Semiconductor is a Bidirectional Trigger Diode that is ideal for triggering triacs and thyristors, AC switches and controls, and dimmer circuits applications. It has a break-over voltage of up to 45 V and a break-over current of less than 50 µA. This diac has a power dissipation of 150 mW. This RoHS Compliant diac is available in a surface-mount package that measures 3.5 x 1.45 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Over-Voltage/Over-Current Protection Controller for Camera Applications | |
eFuse IC
from Analog Devices
|
| The LTC4361 from Analog Devices is an Over-Voltage/Over-Current Protection Controller that safeguards 2.5 V to 5.5 V systems from input supply over-voltage levels. It has a voltage rating of up to 80 V and a current rating of 10 µA. This controller has a delayed start-up and adjustable dV/dt ramp-up for inrush current limiting. It features an over-current circuit breaker, over-voltage turn-off, gentle shutdown and reverse voltage protection mechanisms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 V LDO Voltage Regulator for Powertrain Applications | |
LDO Voltage Regulator
from onsemi
|
| The NCV8772 from onsemi is an LDO Voltage Regulator that is ideal for body control modules, instruments and clusters, occupant protection and comfort, and powertrain applications. It requires an input voltage of 4.5 - 40 V. This regulator provides an output voltage of 5 V and has a drop-out voltage of 250 mV. It has a robust design, allowing it to be used in severe automotive environments, and offers an ultra-low quiescent current as low as 24 µA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Standard Power Resistor for High Power Applications | |
Power Resistor
from Ohmite Manufacturing
|
| The HS50E3 Series from Ohmite Manufacturing is a Standard Power Resistor that is designed for high power applications. It has a resistance of 1 - 86000 ohms and a resistance tolerance of ±10%. This resistor has a voltage rating of 1250 V and a power rating of 50 W. It offers optimal volume efficiency and high pulse capability. This resistor includes custom designs that can meet specific needs and is wound to ensure high pulse power handling capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Qualified Flexible Matrix LED Controller IC | |
LED Driver IC
from NXP Semiconductors
|
| The ASL5008SHV from NXP Semiconductors is an Automotive-Qualified Flexible Matrix LED Controller IC that provides a cost-effective design solution, specifically targeting advanced automotive exterior lighting applications. It requires an input voltage of 5 V. This AEC-Q100 Grade 1-qualified controller consists of a CAN controller, 9-bit A/D converter, abnormal condition detectors, multiplexer, phase shifter, switches, voltage references, and modulation blocks. |
| |
Download Datasheet
Product Details | |
|
