| Featured Products this Week |
|
|
| Automotive Qualified 1:150 Current Sense Transformer | |
Power Transformer
from Coilcraft
|
| The CST2010-150LD from Coilcraft is an Automotive Qualified Current Sense Transformer that has been designed for automotive systems applications. This transformer has a primary current of 47 A and an isolation voltage of 1500 V (RMS). It has an inductance of 19.2 mH and a turns ratio of 1:150. This AEC-Q200-qualified transformer is designed for use over 1 MHz and has a very low primary DC resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 410 W OHSAS 18001-Certified Mono-Crystalline Solar Panel | |
Solar Panels
from IBC SOLAR
|
| The 410 OS10-HC from IBC SOLAR is a Mono-Crystalline Solar Panel that has been designed with an innovative cell connector design for improved light utilization with oblique light incidence. It delivers an output power of 410 W and has an efficiency of 21%. This solar panel requires a supply voltage of 31.25 V and a supply current of 13.12 A. It offers reduced power and shading losses through the use of 9-cell connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 Ohms Wirewound Resistor for Industrial Applications | |
Power Resistor
from Vishay
|
| The FST02506E25R00JE from Vishay is a Wirewound Resistor that is ideal for industrial applications. It has a resistance of up to 25 ohms and a resistance tolerance of 5%. This power resistor has a power rating of less than 25 W. It includes a high-temperature silicone coating that ensures durability and reliability, while the complete welded construction adds to the robustness of the design. This resistor exhibits excellent operational stability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 µH Toroidal Power Inductor | |
Power Inductor
from API Delevan
|
| The PT1000-2050 from API Delevan is a Toroidal Power Inductor that is ideal for high-power applications. This inductor has an inductance of 1000 µH and an inductance tolerance of ±15%. It has a current rating of 5.9 A and dynamic contact resistance (DCR) of 200 milli-ohms. This power inductor uses a single-layer winding to maximize the operating frequency and minimize board space. It is available in a radial-leaded package that measures 52.07 x 21.59 x 19.81 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 kW Electric Transaxle for Agriculture Applications | |
Electric Axle
from e-comer
|
| The TX2 PLUS SERIE - WHEEL HUBS VERSION from e-comer is an Electric Transaxle that has been engineered for massive electrification to provide a complete scalable drivetrain system for electric vehicles. It delivers a peak output power of 60 kW and has an efficiency of 95%. This e-drive axle provides a torque of up to 1.6 Nm and has a speed of less than 7.2 rpm. This axle is ideal for construction, agriculture, e-mobility, cleaning, and logistics applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 470 µF AC Power Film Capacitor for DC Link Applications | |
Power Capacitor
from TDK Corporation
|
| The B25620B0477K701 from TDK Corporation is an AC Power Film Capacitor that is ideal for general-purpose, DC link, and drive applications. This capacitor has a capacitance of 470 µF and a capacitance tolerance of ±10%. It has a voltage rating of 700 V and an equivalent series resistance (ESR) of less than 1.6 milli-ohms. This RoHS-compliant power capacitor is available in a through-hole package that measures 85 x 101 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V Standard Power Diode for DC Motor Applications | |
Power Diode
from WeEN Semiconductors
|
| The WND10M600X from WeEn Semiconductors is a Standard Power Diode that is ideal for power supplies, rectifiers for DC motor field supplies, and bypass diode applications. It has a forward voltage of 0.95 V and a forward current of up to 10 A. This power diode has a repetitive peak reverse voltage of less than 600 V and a reverse current of up to 10 µA. It ensures a low forward voltage drop while exhibiting high voltage and operating temperature. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2024 DoD Energy & Power Summit | | 2024 DoD Energy & Power Summit | | The DoD Energy and Power Summit 2024 is a ‘Town-Hall’ style forum that will bring together leaders from across U.S. military services, DoD, federal government, & industry. This event will explore the modernization and advancement of energy and power technologies and solutions that promote energy security, resiliency, and sustainability and that meet the DoD’s installation and operational energy demands. Click here to learn more. | | | |
|
|
| Three-Phase EMI Filter for Robotics Applications | |
EMI / EMC Filter
from Delta Electronics
|
| The 180TDVST2-1 from Delta Electronics is a Three-Phase EMI Filter that is ideal for electric equipment, UPS, machine tools, copy machines, automation equipment, robots and AC motor drive applications. It has a voltage rating (AC) of 480 V and a current rating of 180 A. This filter has an operating frequency of 50/60 Hz. It is available in a chassis-mount package that measures 350.5 x 170 x 140 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 V DC Voltage Transducer for Shunt Isolator Applications | |
Voltage Transducer
from Ohio Semitronics
|
| The VT7-001D from Ohio Semitronics is a Voltage Transducer that is ideal for accurate measurement and isolation of DC voltage/shunt isolator applications. It requires an input voltage of 0 - 10 V and provides an output voltage from -10 V to +10 V. This voltage transducer is primarily intended to measure and isolate DC voltage signals, but may also be used to monitor AC and non-sinusoidal waveforms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad-Channel Operational Amplifier for Buffer Applications | |
Power Operational Amplifier
from Analog Devices
|
| The LT1359IS#TRPBF from Analog Devices is a Quad-Channel Operational Amplifier that has been designed to provide outstanding AC and DC performance. It requires a supply voltage of 5 - 30 V, an input offset current of 40 nA, and an input bias current of 120 nA. This op-amp provides an output current of 30 mA, a large signal voltage gain of 15 V/mV, and a common-mode rejection ratio (CMRR) of 81 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| AC/DC Current Sense Transducer for Battery Management Applications | |
Current Transducer
from ICE Components
|
| The ISE-A-800 from ICE Components is an AC/DC Current Sense Transducer that has been designed for the electronic measurement of AC and DC signals. It requires a supply voltage of 5 V and a primary current from -100 A to +100 A. This current sensor provides an output current of ±2 mA. It has an accuracy of less than 0.6 and a linearity error of up to 0.1%. It is factory-programmable and offers a customizable current range. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 V Planar Passivated Low-Power Triac for Control Applications | |
Triac
from Renesas
|
| The BCR08DS-14AT13#BD0 from Renesas is a Planar Passivated Low-Power Triac that is ideal for washing machines, electric fans, air cleaners and other general-purpose control applications. It has a break-over voltage of 700 V and a break-over current of less than 0.8 A. This thyristor has a gate trigger voltage of over 2 V and a gate trigger current of less than 7 mA. It is available in a surface-mount package that measures 6.5 x 3.5 x 1.66 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32 V WEEE-Compliant Diac for Switching Applications | |
Diac
from Fagor Electronica
|
| The FD0230YM00TR from Fagor Electronica is a Diac that is ideal for simplified gate control circuits, starting element in fluorescent lamp ballasts, universal-motor speed control, heat control, and other switching applications. It has a break-over voltage of 32 V and a break-over current of less than 50 µA. This RoHS-compliant diac is constructed from silicon material and features a glass hermetically-sealed exterior for optimal protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Thermally-Protected Metal Oxide Varistor | |
Varistor
from Meritek Electronics Corporation
|
| The TPV14N391KS from Meritek Electronics Corporation is a Metal Oxide Varistor. It has an AC voltage rating of 250 V, a DC voltage rating of 320 V, and a clamping voltage of less than 650 V. It is thermally protected to offer exceptional protection with a high peak surge current rating of up to 10 kA. This varistor features standard lead form and spacing options to accommodate various installation requirements. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2024 DoD Energy & Power Summit | | |
|
|
| 6 A Power Negative Temperature Coefficient Thermistor | |
Inrush Current Limiter
from Cantherm
|
| The MF72-006D20 from Cantherm is a Power Negative Temperature Coefficient Thermistor that has been designed to provide inrush current suppression for sensitive electronics. It has a current rating of up to 6 A and a resistance of 113 milli-ohms. This thermistor can be connected in series with a power source to limit current surges typically created during turn-on events. It decreases its resistance value to a very low value once the circuit is energized. |
| |
Download Datasheet
Product Details | |
|
|
|
| Current Limiting Over-Voltage Protection eFuse IC for SSD Applications | |
eFuse IC
from Alpha & Omega Semiconductor
|
| The AOZ18101DI-03 from Alpha & Omega Semiconductor is a Current-Limiting Over-Voltage Protection eFuse IC that targets applications requiring front-end protection at the input line. It requires an input voltage of 3.5 - 14 V. This eFuse IC offers a soft-start function that can be programmed to control the in-rush current for highly capacitive loads. This eFuse IC provides auto-restart functionality after a fault is detected and includes an external blocking FET control pin. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Qualified Symmetric Gate Driver IC | |
Gate Driver
from Skyworks Solutions
|
| The Si823H4AB-IS1 from Skyworks Solutions is an Automotive Qualified Symmetric Gate Driver that combines two isolated gate drivers in a single package to enable high-power applications. It requires an input voltage of 3 - 5.5 V and an input current of 1.3 mA. This gate driver is ideal for driving power MOSFETs and IGBTs used in a wide variety of switched power and motor control systems. It utilizes Skyworks’ proprietary Silicon isolation technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| Motor Pre-Driver IC for 3-Phase BLC Motor Drive Applications | |
Motor Driver IC
from Melexis
|
| The MLX81340 LLW-BMT-003-RE from Melexis is a Motor Pre-Driver that has been designed for external NFETs with a total charge of up to 60 nC. It requires an input voltage of up to 36 V and provides an output current of less than 15 mA. This motor driver includes three pre-drivers suitable for both DC and BLDC motors, making it ideal for motors operating up to 500 W. It features a typical charge current and a discharge current that ensures efficient operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W AC-DC Inverter for Medical Applications | |
AC to DC Converter
from Delta Electronics
|
| The AB60S1500A from Delta Electronics is an AC-DC Converter that steps down an AC input voltage of 85 - 264 V to a DC output voltage of 15 V. This converter delivers an output power of up to 60 W and has an efficiency of 87%. It features an extended operating temperature range from -40°C to +80°C. This high-performance converter benefits from UL/cUL/IEC/EN 60950-1/UL508 standards approval for industrial safety and UL/cUL/IEC/EN 60601 approval for medical safety. |
| |
Download Datasheet
Product Details | |
|
|
|
| Off-Line CV/CC ZVS Flyback Load Switch IC for USB Power Delivery Applications | |
Power Switch IC
from Power Integrations
|
| The INN4074C-H182 from Power Integrations is an Off-Line CV/CC ZVS Flyback Integrated Load Switch IC that has been designed to dramatically improve the efficiency of flyback power converters. This switch requires an input voltage of 85 - 264 V. It delivers an output power of 75 W in adapter mode (typical non-ventilated enclosed adapter) and 85 W in open frame mode. This switch integrates both primary and secondary controllers. |
| |
Download Datasheet
Product Details | |
|
