| Featured Products this Week |
|
|
| 99.5 µF Power Film Capacitor | |
Power Capacitor
from Siemens
|
| The 4RB8150-3EA20 from Siemens is a Power Film Capacitor. It has a capacitance of 99.5 µF and a capacitance tolerance from -5% to +5%. This capacitor has a voltage rating of up to 400 V. It includes self-healing metalized polypropylene film as dielectric and is filled with non-PCB, soft biodegradable resin to provide low dielectric losses, high stability, and excellent self-healing properties, enhancing reliability in various electrical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual Monolithic Rail-to-Rail CMOS Operational Amplifier | |
Power Operational Amplifier
from Advanced Linear Devices
|
| The ALD2722EPBL from Advanced Linear Devices is a Dual Monolithic Rail-to-Rail CMOS Operational Amplifier that is designed to offer electrically programmability to compensate for external component tolerances and ensure high performance. It requires a supply voltage of 2 - 10 V and an input offset and bias current of up to 10 pA. This op-amp provides an output voltage of 4.9 V, a large signal voltage gain of 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Dropout Voltage Regulator for Portable Applications | |
LDO Voltage Regulator
from MaxLinear
|
| The SPX2815 from MaxLinear is a Low-Dropout Voltage Regulator that is ideal for desktop PCs, servers, powering VGA and sound cards, cordless phones, battery chargers, adjustable power supplies, portable instrumentation, SMPS post-regulation, constant current regulators, and disk drive applications. It requires an input voltage of up to 10 V. This LDO regulator provides an output voltage of 8 V and has a drop-out voltage of 1.2 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Automotive-Qualified SiC Schottky Diode for SMPS Applications | |
Power Diode
from Microchip Technology
|
| The MSC050SDA120S from Microchip Technology is an Automotive-Qualified Zero Recovery Silicon Carbide Schottky Diode that is ideal for power factor correction (PFC), anti-parallel diode, switch-mode power supply, inverters/converters motor controllers, freewheeling diode, inverters/converters, and snubber/clamp diode applications. It has a forward voltage of 1.5 V and a forward current of up to 50 A. This AEC-Q101-qualified diode has a reverse current of up to 200 µA. |
| |
Download Datasheet
Product Details | |
|
|
|
| ±5 V Bidirectional DC Voltage Transducer for Shunt Isolator Applications | |
Voltage Transducer
from Ohio Semitronics
|
| The VT7-001X5 from Ohio Semitronics is a Bidirectional DC Voltage Transducer that is designed to provide an output voltage that is directly proportional to the input signal. It requires an input voltage of 0 - 10 V and provides an output voltage from -5 V to +5 V. This transducer has a response time of 50 µs with an accuracy of ±0.25% (full-scale). It is primarily intended to measure and isolate DC voltages, but may also be used to monitor AC and non-sinusoidal waveforms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Zero Sequence AC Current Transducer for Industrial Control Applications | |
Current Transducer
from Shenzhen Sensor Electronic Technology
|
| The CE-IJ03-54B10-0.5 from Shenzhen Sensor Electronic Technology is a Zero Sequence AC Current Transducer that is ideal for communication systems, electrical power systems, railways, industrial control systems, fire leakage systems, small current grounding systems and computer equipment protection applications. It requires a supply voltage (DC) of 11 - 28 V. This transducer provides an output voltage of up to 5 V and an output current of 4 - 20 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 V Silicon Bilateral Bidirectional Thyristor for Commercial Applications | |
Triac
from Digitron Semiconductors
|
| The T2500NHR from Digitron Semiconductors is a Silicon Bidirectional Thyristor that is ideal for military, industrial, and commercial applications. It has a break-over voltage of 800 V and a break-over current of 60 A. This RoHS-compliant thyristor has a gate trigger voltage of 0.2 - 2.5 V and a gate trigger current of 10 - 60 mA. It is available in a through-hole package that measures 30.02 x 10.290 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2024 DoD Energy & Power Summit | | 2024 DoD Energy & Power Summit | | The DoD Energy and Power Summit 2024 is a ‘Town-Hall’ style forum that will bring together leaders from across U.S. military services, DoD, federal government, & industry. This event will explore the modernization and advancement of energy and power technologies and solutions that promote energy security, resiliency, and sustainability and that meet the DoD’s installation and operational energy demands. Click here to learn more. | | | |
|
|
| 146 V Silicon Bilateral Voltage Triggered Switch | |
Sidac
from JieJie Microelectronics
|
| The K1400G from JieJie Microelectronics is a Silicon Bilateral Voltage Triggered Switch that has been designed for high-voltage lamp ignitors, natural gas ignitors, gas oil ignitors, high-voltage power supplies, xenon ignitors, overvoltage protectors, pulse generators, and fluorescent lighting ignitor applications. It has a break-over voltage of up to 146 V and a break-over current of less than 50 µA. This sidac boasts exceptional transient surge absorption capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Phase Control Thyristor for Power Supply Applications | |
Silicon Controlled Rectifier
from Powerex
|
| The C451PB from Powerex is a Phase Control Thyristor that is designed for phase control systems. It has a break-over voltage of up to 1200 V and a break-over current of less than 1500 A. This thyristor has a gate trigger voltage of up to 5 V and a gate trigger current of 200 mA. It has low on-state voltage and employs field-proven amplifying gate technology. This RoHS-compliant thyristor has greater di/dt and dv/dt capability, thereby resulting in a remarkable surge ratings. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32 V Bidirectional Silicon Diac for Motor Control Applications | |
Diac
from Fagor Electronica
|
| The FD0202YR00AM from Fagor Electronica is a Silicon Diac that is ideal for fluorescent lamp ballasts, switching circuits, triggering operations, universal motor speed control, and heat control applications. It has a break-over voltage of 32 V and a break-over current of less than 15 µA. This diac has a low break-over current and offers bidirectional protection with excellent symmetry. It is available in a hermetically-sealed through-hole package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 595 V Medium Voltage Varistor | |
Varistor
from Bourns
|
| The DV 230 K 3225 from Bourns is a Medium Voltage Varistor that has been designed to protect electronic equipment against high voltage surges in the medium voltage region. It has an AC voltage rating of 230 V (RMS), a DC voltage rating of 300 V, and a clamping voltage of 595 V. This varistor provides superior transient energy absorption due to its improved energy volume distribution and power dissipation. It is packaged in a leadless chip design. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 A Negative Temperature Coefficient Thermistor | |
Inrush Current Limiter
from Amphenol Advanced Sensors
|
| The CL-21 from Amphenol Advanced Sensors is a Negative Temperature Coefficient Thermistor that has been designed to provide an in-rush current limit for electronic devices. It has a current rating of up to 8 A and a resistance of 1.3 ohms. This UL-approved compact thermistor offers excellent mechanical stability and a low-cost solid-state solution for in-rush current suppression. It has an operating temperature range of -50ºC to 175ºC. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP20 Protected 200 kA Surge Suppression IC | |
Surge Suppression IC
from Littelfuse
|
| The SPD2-350-4P0-R from Littelfuse is a Surge Suppression IC that has been designed to provide equipment protection from transient over-voltage events that last in the range of microseconds. It requires an input voltage of up to 350 V and has a current rating of less than 50 kA (IEC standard) and 200 kA (UL standard). This IC can clamp and withstand high-energy transients, ensuring low residual voltage during surge events. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Phase Brushless Motor Driver for Desktop PC Applications | |
Motor Driver IC
from ROHM Semiconductor
|
| The BD6971FV from ROHM Semiconductor is a Single-Phase Brushless Motor Driver IC that has been designed for PCs, general consumer equipment of desktop PCs, and projector applications. It requires an input voltage of 3.5 - 17 V. This motor driver allows speed control using either DC or direct pulse width modulation (PWM) input and supports PWM soft switching for smoother operation. It also includes a quick start function. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2024 DoD Energy & Power Summit | | |
|
|
| Automotive-Qualified Single-Channel LED Driver for Fog Light Applications | |
LED Driver IC
from STMicroelectronics
|
| The ALED6001 from STMicroelectronics is an Automotive-Qualified Single-Channel LED Driver IC that is ideal for automotive exterior lighting, daytime running lights, high and low beam lights, fog lights, and position lighting/blinker applications. It requires an input voltage of 5.5 - 36 V. This LED driver combines a boost controller and high-side current sensing circuitry for driving one string of high-brightness LEDs. It is compatible with multiple topologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| Gate Driver Optocoupler IC for UPS Applications | |
Gate Driver
from onsemi
|
| The FOD3150 from onsemi is a Gate Driver Optocoupler that is ideal for industrial inverters, induction heating, isolated IGBT/power MOSFET gate drivers, and uninterruptible power supply (UPS) applications. It requires an input voltage of 15 - 30 V. This gate driver utilizes onsemi’s coplanar packaging technology, Optoplanar, and an optimized IC design to achieve high noise immunity and high common-mode rejection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 480 W USB-Based DC-AC Inverter for Industrial Applications | |
DC to AC Inverter
from Phoenix Contact
|
| The 1067325 from Phoenix Contact is a DC-AC Inverter that converts a DC input voltage of 20 - 30 V to an AC output voltage of 120/230 V. It delivers an output power of 480 W and has an efficiency of over 87%. This IP20-rated inverter has a manual selection of AC output voltage via a signal terminal that enables worldwide use. It provides a pure sine curve at the output and can be switched in parallel for various applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W AC-DC Converter for LED Lighting Applications | |
AC to DC Converter
from Vicor
|
| The PFM4414VB6M48D0CA0 from Vicor is an AC-DC Converter that steps down an AC input voltage of 85 - 264 V to a DC output voltage of 48 V. This converter delivers an output power of up to 400 W and has an efficiency of 92%. It offers a robust mechanical design with built-in EMI filtering. This ultra-low-profile converter incorporates AC-DC conversion, integrated filtering, and transient surge protection. It has a versatile two-sided thermal strategy. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive Qualified Hot-Swap Protection Power Switch IC | |
Power Switch IC
from Monolithic Power Systems
|
| The MPQ5066-AEC1 from Monolithic Power Systems is an Automotive-Qualified Hot-Swap Protection Power Switch IC that has been designed to protect its input from undesired short-circuit and transient events coming from the output terminal. This switch requires an input voltage of 6 - 28 V. It incorporates an integrated power MOSFET, adjustable current limit, and a current monitor that conducts measurements with an accuracy of ±10%. |
| |
Download Datasheet
Product Details | |
|
|
|
| Over-Voltage Protection eFuse IC for PCI/SSD Applications | |
eFuse IC
from Alpha & Omega Semiconductor
|
| The AOZ18101DI-03 from Alpha & Omega Semiconductor is an Over-Voltage Protection eFuse IC that has been designed for applications that require front-end protection at the input line. It requires an input voltage from 3.5 V to 14 V and provides an output current of 5 A. This eFuse IC has an on-state resistance of 20 milli-ohms and can withstand an absolute voltage of up to 22 V on the input and output voltage pins. |
| |
Download Datasheet
Product Details | |
|
