| Featured Products this Week |
|
|
| 5 W Isolated AC-DC Converter for Industrial Control Applications | |
AC to DC Converter
from Aimtec
|
| The AMEL5-24SVZ from Aimtec is an AC-DC Converter that steps down an AC input voltage of 85 -264 V to a DC output voltage of 24 V. It delivers an output power of up to 5 W and has an efficiency of 81%. This converter offers an isolation of 4000 V (AC) for improved reliability and system safety. It provides greater cost-effectiveness due to material normalization and production automation, which further improves overall reliability and performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Low Side Switch for Sensor Applications | |
Power Switch IC
from Nisshinbo Micro Devices
|
| The NJW4822KH1-B from Nisshinbo Micro Devices is a Single-Channel Low Side Switch that is ideal for various sensor applications. It requires an input voltage of 2.64 – 5.5 V and provides an output current of 0.2 A. It has a drain-source voltage of 43 V and can be controlled by a logic signal (3 V/5 V) directly. This power switch integrates active clamp, over-current, error flag output and thermal shutdown that is built in with N-channel MOSFET. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 V Dual Asymmetric N-Channel MOSFET for DC-DC Converter Applications | |
MOSFET
from Alpha & Omega Semiconductor
|
| The AONG36322 from Alpha & Omega Semiconductor is a Dual-Asymmetric N-channel MOSFET that is ideal for DC-DC converters, servers, POL, telecom, and industrial applications. It has a drain-source breakdown voltage of over 30 V, a gate threshold voltage of 1.7 V, and a drain-source on-resistance of less than 6.8 milli-ohms. This MOSFET has a continuous drain current of up to 103 A and a power dissipation of less than 59 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Enhancement Mode GaN-on-Silicon Power Transistor | |
GaN Power Transistor
from Teledyne e2v HiRel Electronics
|
| The TDG650E601TSP from Teledyne e2v HiRel Electronics is an Enhancement Mode GaN-on-Silicon Power Transistor that is ideal for battery management, traction drives, dc-dc converters, space motor drives, and bridgeless totem pole PFC applications. This GaN transistor has a drain-source voltage of up to 650 V, a gate threshold voltage of 1.7 V, and a drain-source on-resistance of 25 milli-ohms. It has a continuous drain current of less than 60 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Three-Phase Gate Driver IC | |
Gate Driver
from Toshiba
|
| The TB9083FTG from Toshiba is an Automotive-Qualified Three-Phase Gate Driver IC that is designed specifically for brushless motors in in-vehicle applications. It requires an input voltage of 4.5 - 28 V. This ASIL-D certified gate driver features an additional fail-safe relay pre-driver to reduce operational malfunctions. It consists of a charge pump, a motor current detector circuit, oscillator circuits, and an SPI communication interface. |
| |
Download Datasheet
Product Details | |
|
|
|
| 110 kVA 3-Phase DC-AC Inverter for Solar Power Applications | |
DC to AC Inverter
from Delta Electronics
|
| The M100_210 from Delta Electronics is a 3-Phase DC-AC Inverter that converts a DC input voltage of 570 - 1000 V to an AC output voltage of 400 V. It delivers an output power of 110 kVA and has an efficiency of up to 99%. This inverter offers excellent performance in a lightweight, ground-mount design and integrates a smart cooling system that ensures minimal noise. It supports SUB_1G and Bluetooth to realize wireless communications in solar plant. |
| |
Download Datasheet
Product Details | |
|
|
|
| 170 kW EV Traction Motor for Hybrid Electric Vehicles | |
EV Traction Motor
from Danfoss
|
| The EM-PMI375-T800-1900 from Danfoss is an EV Traction Motor that is ideal for generators for diesel-electric/serial hybrid vehicles, traction/propulsion motors, and generators/motors for parallel hybrid applications. It delivers a continuous output power of 170 kW and has an efficiency of up to 96%. This motor provides a torque of 771 Nm and has a speed of up to 3800 rpm. It utilizes synchronous reluctance-assisted permanent magnet (SRPM) technology. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DoD Energy & Power Summit 2024 | | DoD Energy & Power Summit 2024 | | The DoD Energy and Power Summit 2024 is a ‘Town-Hall’ style forum that will bring together leaders from across U.S. military services, DoD, federal government, & industry. This event will explore the modernization and advancement of energy and power technologies and solutions that promote energy security, resiliency, and sustainability and that meet the DoD’s installation and operational energy demands. Click here to learn more. | | | |
|
|
| 450 W IEEE 802.3at-Compliant Power-Over-Ethernet Source | |
Power Over Ethernet IC
from Microchip Technology
|
| The PD-9012G/ACDC/M-EU from Microchip Technology is a 12-Port IEEE 802.3at-Compliant Power-Over-Ethernet Source that is specifically designed to power IEEE 802.11n and IEEE 802.3at access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients, and other high-power Ethernet end terminal applications. It delivers an output power of 450 W and a data rate of 10, 100, and 1000 Mbps. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.5 Ohms Wire-Wound Power Resistor | |
Power Resistor
from TE Connectivity
|
| The SBCHE61R5K from TE Connectivity is a Wire-Wound Power Resistor that is ideal for industrial applications. It has a resistance of 1.5 ohms and a resistance tolerance of 10%. This resistor has a power rating of 7 W. It has a temperature coefficient of resistance of ±400 ppm/°C and operates over a temperature range from -55°C to +350°C. This RoHS-compliant power resistor is available in a through-hole package that measures 38 x 7 x 8 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Field Stop Trench IGBT for solar inverter Applications | |
IGBT
from Diodes Incorporated
|
| The DGTD120T25S1PT from Diodes Incorporated is a Field Stop Trench IGBT that is ideal for motor drives, UPS, welders, solar inverters, and IH cooker applications. It has a collector-emitter voltage of less than 1200 V, a saturated collector-emitter voltage of 2.40 V, and a gate-emitter threshold voltage of up to 6 V. This IGBT has a collector current of less than 50 A and a power dissipation of up to 348 W. It integrates an ultra-soft, fast-recovery anti-parallel diode. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual PNP Transistor for General-purpose Switching Applications | |
Bipolar Junction Transistor
from PANJIT Semiconductor
|
| The MMDT2907AQ_R2_00001 from PANJIT Semiconductor Dual PNP Transistor that is ideal for general-purpose switching applications. It has a collector-emitter breakdown voltage of over -60 V, a base-emitter voltage from -1.3 V to -2.6 V, and a saturated collector-emitter voltage of less than -0.4 V. This RoHS-compliant transistor has a collector current of less than -600 mA. It employs a PNP epitaxial silicon structure based on a planar design. |
| |
Download Datasheet
Product Details | |
|
|
|
| Li-ion/Polymer Shunt Battery Charger for Energy Harvesting Applications | |
Battery Management IC
from Analog Devices
|
| The LTC4071 from Analog Devices is a Li-ion/Polymer Shunt Battery Charger System that allows simple charging of Li-ion or Polymer batteries from very low current, intermittent, or continuous charging sources. It requires an input voltage of 2.65 V. This battery charger consists of a near-zero current low battery latching disconnect function that protects even the lowest capacity batteries from deep discharge and potentially irreparable damage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 dB Quad-Operational Amplifier | |
Power Operational Amplifier
from onsemi
|
| The LM324ADTBR2G from onsemi is a Quad-Operational Amplifier that is designed with true differential inputs. This op-amp requires a supply voltage of 3 - 32 V, an input offset voltage of 2 mV, and an offset current of 5 nA. It provides an output voltage of 3.5 V. This op-amp offers a signal voltage gain of 25 V/mV, and a common-mode rejection ratio (CMRR) of 65 dB. It consists of four amplifiers per package and supports low input bias currents. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Dropout Voltage Regulator for Battery-Powered Applications | |
LDO Voltage Regulator
from Taejin Technology
|
| The LM1117GSF-1.8 from Taejin Technology is a Low-Dropout Voltage Regulator that is ideal for active SCSI terminators, portable/ plan top/ notebook computers, high-efficiency linear regulators, SMPS post regulators, disk drives, and battery charging applications. It requires an input voltage of up to 20 V. This LDO regulator provides an output voltage of 1.8 V and has a drop-out voltage of 1.2 V. It includes internal current and thermal protection for safe operation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by DoD Energy & Power Summit 2024 | | |
|
|
| 25 V Voltage Transducer for High Precision Applications | |
Voltage Transducer
from Ohio Semitronics
|
| The VT7-002B from Ohio Semitronics is a Voltage Transducer that is ideal for accurate measurement and isolation of DC voltage/shunt isolator applications. It requires an input voltage of 0 - 25 V and provides an output current of 0 - 0.001 A. This transducer offers precise DC voltage measurement, which ensures accurate current readings. It features a robust 2500V (AC) dielectric test that evaluates insulation strength and ensures the meeting of safety standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| 28 V AC/DC Bidirectional Current Transducer | |
Current Transducer
from American Aerospace Controls
|
| The S1016-50 from American Aerospace Controls is an AC/DC Bidirectional Current Transducer that is ideal for power monitoring system applications. It requires a supply voltage (DC) of 18 - 28 V. This transducer includes the combined worst-case effects of zero offset, hysteresis, supply swings, and current cable positioning to conduct accurate current measurements. It is available in a screw-mount package that measures 113 x 87.6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 kA AC Surge Protector for Power Circuit Applications | |
Surge Suppression IC
from Bourns
|
| The 1260-1NSMG-120 from Bourns is a Hybrid Surge Protective Device that is designed to protect high-risk electrical service entrance and branch panels. It has a voltage rating (AC) of 120 V and can handle a surge current of 100 kA (per mode). This protective device is based on Bourns’ advanced hybrid architecture (metal oxide varistor (MOV) + gas discharge tube (GDT)) technology, which provides excellent reliability and safety with no leakage or follow current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Hex Half-Bridge Motor Driver | |
Motor Driver IC
from Monolithic Power Systems
|
| The MPQ6526 from Monolithic Power Systems is a Hex Half-Bridge Motor Driver with serial input control. It requires an input voltage of 7 - 28 V and provides an output current of up to 900 mA. The motor driver consists of integrated power MOSFETs that can drive up to six different loads. It has six half-bridges that can be controlled separately from a standard serial data interface and supports various diagnostic functions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Dual-Channel Buck LED Driver IC for Lighting Applications | |
LED Driver IC
from NXP Semiconductors
|
| The ASL2416SHN from NXP Semiconductors is an Automotive Qualified Dual-Channel Buck Mode LED Driver IC that is ideal for automotive LED lighting, daytime running lights, position or park lights, low beam, high beam, turn indicators, fog lights, cornering lights, and advanced front lighting applications. It requires an input voltage of 10 - 80 V. This LED driver IC employs a hysteretic buck DC-DC topology, accommodating input voltages from 10 V to 80 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Half-Bridge Gate Driver IC for Agriculture Drones Applications | |
Gate Driver
from Infineon Technologies
|
| The 2ED2742S01GXUMA1 from Infineon Technologies is a Half-Bridge Gate Driver IC that has been designed to drive N-channel MOSFETs. This gate driver IC requires an input voltage of 7 - 18 V. This gate driver IC utilizes a floating channel to achieve high-efficiency bootstrap operation and has a bootstrap voltage of +160 V. It offers independent under-voltage lockout for both high and low sides, providing robust protection and reliability. |
| |
Download Datasheet
Product Details | |
|
