| Featured Products this Week |
|
|
| Three Flange Dual Primary Power Transformer | |
Power Transformer
from Tamura
|
| The PL30-12-130B from Tamura is a Three Flange Dual Primary Power Transformer. This transformer requires a primary input voltage of 115 - 230 V and provides a secondary output voltage of 6.3 – 12.6 V. It has a power rating of 30 VA. This transformer provides a voltage regulation of 19% at full load to no load condition. It operates over a temperature range of 55ºC - 155ºC. This RoHS-compliant transformer is available in a surface-mount package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1100 µF Automotive Qualified Polymer Aluminium Capacitor | |
Power Capacitor
from KEMET Corporation
|
| The APL90A112LH063 from KEMET Corporation is an Automotive Qualified Polymer Aluminium Capacitor that is suitable for high-performance applications. It has a capacitance of 1100 µF and a capacitance tolerance of ±20%. This AEC-Q200-qualified capacitor has a voltage rating of 63 V. It is halogen-free, which supports environmentally friendly requirements. This RoHS-compliant capacitor is available in a through-hole package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 A AC/DC Current Transducer for Battery Testing Applications | |
Current Transducer
from Danisense
|
| The DS600ID from Danisense is an AC/DC Current Transducer that is designed for isolated DC and AC current measurements from -1000 A to +1000 A. It continuously measures AC current levels of up to 600 A and DC current levels from -900 A to +900 A while maintaining a linearity error of less than 1 ppm. This current transducer requires a supply voltage of 15 V. It is based on the ultra-stable Danisense closed-loop flux gate technology. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Flame-Retardant Negative Temperature Coefficient Thermistor | |
Inrush Current Limiter
from TDK Corporation
|
| The B57238S0160M0 from TDK Corporation is a Negative Temperature Coefficient Thermistor that is designed for inrush current limiting in switch-mode power supplies and soft-start motors. It has a power rating of 3.9 W and a resistance of 16 ohms. This UL 1434-approved thermistor has tinned copper wire leads with UL 94 V-0-recognized flame-retardant coating and exhibits highly stable electrical characteristics. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 V Radiation-Hardened Programmable LDO Regulator | |
LDO Voltage Regulator
from Renesas Electronics
|
| The ISL75051ASEH from Renesas is a Radiation-Hardened Programmable LDO Regulator that is ideal for LDO regulators for space power systems, DSP/FPGA/microprocessor core power supplies, post-regulation of SMPS, and down-hole drilling applications. It requires an input voltage of 2.2 - 6 V. This LDO provides an output voltage of 0.8 - 5 V (adjustable) and has a dropout voltage of 65 mV. It is engineered for outstanding transient response. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Interview | | Interview with Raj Radjassamy from OmniOn Power | | everything PE recently interviewed Raj Radjassamy, Director of 5G & Wireless Segment of OmniOn Power, a company that delivers end-to-end power conversion solutions. He works closely with customers to understand and help address the toughest power challenges across their networks. Raj has a Ph.D. in computer engineering from the University of Arizona. Click here to learn more. | | | |
|
|
| 20 V N-Channel DMOS-Based Power MOSFET for Cellular Applications | |
MOSFET
from Torex Semiconductor
|
| The XP161A1265PR-G from Torex Semiconductor is an N-channel Power MOSFET that is ideal for notebook PCs, cellular and portable phones, onboard power supplies, and Li-ion battery system applications. It has a drain-source breakdown voltage of 20 V, a gate-to-source voltage of ±12 V, and a drain-source on-resistance of less than 95 milli-ohms. This power MOSFET has a continuous drain current of up to 4 A and a power dissipation of less than 2 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Field Stop Trench IGBT for SMPS Applications | |
IGBT
from Microchip Technology
|
| The APTGL325A120D3G from Microchip Technology is a Field Stop Trench IGBT that is ideal for welding converters, switched-mode power supplies (SMPS), uninterruptible power supplies (UPS), and motor control applications. It has a collector-emitter breakdown voltage of up to 1200 V, a saturated collector-emitter voltage of 1.8 V, and a gate threshold voltage of 5.8 V. This IGBT has a collector current of up to 325 A and a power dissipation of less than 1500 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W Bifacial Mono-Crystalline Solar Panel | |
Solar Panels
from AXITEC
|
| The AC-400MBT/108V from AXITEC is a Bifacial Mono-Crystalline Solar Panel. It delivers an output power of up to 400 W and has an efficiency of 25.6%. This solar panel requires a supply voltage of 31.01 V and a supply current of 12.90 A. It enhances the output power by 25% with the help of bifacial technology. This 108-half-cell bifacial solar panel has guaranteed positive power tolerance from 0 - 5 Wp by individual measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V N-channel GaN Power Transistor for Power Adapter Applications | |
GaN Power Transistor
from GaNPower International
|
| The GPI120R12T74IC from GaNPower International is an N-channel GaN Power Transistor ideal for switching power, power adapters, and power delivery charger applications. This GaN transistor has a drain-source voltage of up to 1200 V and a drain-source on-resistance of less than 18 milli-ohms. It has a continuous drain current of 120 A and a quiescent leakage current of 42 µA. This transistor operates at high switching speed and has a high dv/dt capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90 dB Single-Channel Precision CMOS Operational Amplifier | |
Power Operational Amplifier
from ROHM Semiconductor
|
| The TLR377GYZ-E2 from ROHM Semiconductor is a Single-Channel Precision CMOS Operational Amplifier designed for equipment that operates from battery power. It requires a supply voltage of 1.8 - 5.5 V, an input offset current of 0 pA, and an input bias current of 0.5 pA. This op-amp provides an output current of 25 mA, a large signal voltage gain of 90 dB, and a common-mode rejection ratio (CMRR) of 100 dB. In an ultra-small compact package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 Ah LiFePO4 Battery for Backup Power Supply Applications | |
Electric Vehicle Battery
from Bioenno Power
|
| The BLF-3610A from Bioenno Power is a LiFePO4 Battery that is ideal for solar energy storage, electric motor, ham radio, backup power supply (UPS), portable electronic equipment (audio, visual, networking, power tools), and LED lighting applications. It has a capacity of 10 Ah. This LiFePO4 battery provides a charging voltage of 43.8 V and a charging current of 2 A. It acts as a drop-in replacement for lead acid battery solutions. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCIM Asia 2024 | | PCIM Asia 2024 | | PCIM Asia 2024 is an international meeting ground for specialists in power electronics and its applications in drive technologies and power quality. The event offers a chance to see the latest developments in power electronics components and systems. The strong link between the conference and the exhibition guarantees the high quality of the show. This unique combination fosters the fast and easy exchange between industry and science. It is one of the most influential and user-driven platform for power electronics in Asia, which is held alongside the exhibition. Click here to learn more. | | | |
|
|
| Radiation-Hard Adjustable Negative Voltage Regulator | |
LDO Voltage Regulator
from STMicroelectronics
|
| The RHFL7913A from STMicroelectronics is a Radiation-Hard Adjustable Negative Voltage Regulator. It requires an input voltage from -12 V to -1.3 V. This regulator provides an output voltage of less than -1.16 V and has a dropout voltage of over -450 mV. It includes embedded over-temperature and over-current protection features, ensuring robust and reliable operation under abnormal conditions. This regulator offers an adjustable current limiting function. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 V Voltage Transducer for High Precision Applications | |
Voltage Transducer
from Ohio Semitronics
|
| The VT7-004B from Ohio Semitronics is a Voltage Transducer that is ideal for accurate measurement and isolation of DC voltage/shunt isolator applications. It requires an input voltage of 0 - 100 V and provides an output current from -1 mA to 1 mA. This transducer offers precise DC voltage measurement, which ensures accurate current readings. It has undergone a 2500 V (AC) dielectric test that evaluates insulation strength and ensures the meeting of safety standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Operational Amplifier for DC Gain Block Applications | |
Power Operational Amplifier
from Nisshinbo Micro Devices
|
| The NJM2904CME2-TE2 from Nisshinbo Micro Devices is a Dual-Channel Operational Amplifier that has been designed to operate from a single power supply over a wide range of voltage levels. It requires a supply voltage of 3 - 32 V, an input offset current of 2 nA, and an input bias current of 20 nA. This op-amp provides an output current of 30 mA, a large signal voltage gain of 100 dB, and a common-mode rejection ratio (CMRR) of 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 395 V Metal Oxide Varistor for Electromagnetic Surge Absorption Applications | |
Varistor
from Yageo
|
| The 241KK07 from Yageo is a Metal Oxide Varistor that is ideal for transistors, diodes, ICs, thyristors, and triac protection, surge protection in consumer and industrial electronics, surge protection in electronic home appliances, gas, and petroleum appliances, and electromagnetic surge absorption applications. It has an AC voltage rating of 150 V, a DC voltage rating of 200 V, and a clamping voltage of 395 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP20-Rated Pluggable Surge Protector | |
Surge Suppression IC
from Littelfuse
|
| The SPD2-550-4P0-R from Littelfuse is a Pluggable Surge Protective Device that has been designed to provide equipment protection from transient over-voltage events lasting microseconds. It has a voltage rating of 2 kV and can handle a short-circuit current of up to 200 kA. This surge protective device (SPD) has a response time of less than 25 ms. It limits the voltage supplied to the equipment by a finite amount during over-voltage events. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified LED Driver IC for Center High-Mounted Stop Lamp Arrays | |
LED Driver IC
from onsemi
|
| The NCV7692D10R2G from onsemi is an Automotive-Qualified LED Driver IC that is ideal for rear combination lamps (RCL), daytime running lights (DRL), fog lights, center high-mounted stop lamps (CHMSL) arrays, general automotive linear current led driver, turn signal and other externally modulated applications. It requires an input voltage from -0.3 V to 50 V. This LED driver uses an external NPN bipolar device and feedback resistor(s) to regulate the current. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PCIM Asia 2024 | | |
|
|
| Single High-Speed Gate Driver for Motor Control Applications | |
Gate Driver
from Diodes Incorporated
|
| The DGD0216WT-7 from Diodes Incorporated is a Single High-Speed Gate Driver that is ideal for DC-DC converters, line drivers, motor controls, and switched mode power supply (SMPS) applications. It requires an input voltage of 4.5 - 18 V. This gate driver features logic inputs that are compatible with standard TTL and CMOS logic, ensuring easy interfacing with microcontrollers. It provides fast and well-matched propagation delay. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 kW Pure Sine Wave DC-AC Inverter for Household Applications | |
DC to AC Inverter
from AIMS Power
|
| The PICOGLF30W12V120V from AIMS Power is a Pure Sine Wave DC-AC Inverter that converts a DC input voltage of 12 V to an AC output voltage of 100 - 120 V. It delivers an output power of 3 kW (continuous) and has an efficiency of over 92%. This inverter solution is a combination of an inverter, battery charger, and an auto AC transfer switch that is packed with unique features. It can handle high surge current to meet the demanding power requirements. |
| |
Download Datasheet
Product Details | |
|
