| Featured Products this Week |
|
|
| 135 Ah Lead-Acid Battery for Power System Applications | |
Electric Vehicle Battery
from KIJO Power
|
| The GY6-EVF-135A from KIJO Power is a Lead-Acid Battery that is ideal for UPS/EPS, power systems, telecommunications systems, emergency lighting, auto control systems, solar/wind generating storage cyclic and other general-purpose applications. It has a capacity of 135 Ah (20 hours). This battery provides a voltage rating of 12 V, a charging current of up to 33.75 A, and a discharging current of less than 1620 A. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 22 kW IP6K9K-Rated On-Board Charger for Hybrid Electric Vehicles | |
On-Board Charger
from Bel Power Solutions
|
| The BCL25-700-8 from Bel Power Solutions is an On-Board Charger that has been designed for hybrid (HEV) and fully electric vehicles (EV). It requires an input voltage of 190 – 264 V and an input current of 32 A. This liquid-cooled on-board charger delivers an output power of 22 kW and has an efficiency of up to 95%. It allows direct connection to an EVSE charging station or the public grid and accommodates both single-phase and three-phase AC supply. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2.5 kW Single-Phase Sinewave DC-AC Inverter | |
DC to AC Inverter
from Premium PSU
|
| The ODS-3000-7164-BI from Premium PSU is a Single-Phase Sinewave DC-AC Inverter that converts a DC input voltage of 25.2 - 45 V to an AC output voltage of 120 V. This inverter delivers an output power of 2500 W and has an efficiency of 89%. It allows adjusting of the output voltage via a built-in RS232 interface. This EN45545-certified inverter uses a DIP switch to set frequency either at 50 Hz or 60 Hz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Li-ion/Li-Polymer Linear Battery Charger IC for PDA Applications | |
Battery Management IC
from Monolithic Power Systems
|
| The MP26121DQ-LF-Z from Monolithic Power Systems is a Li-ion/Li-Polymer Linear Battery Charger that is ideal for cell phones, digital cameras, smartphones, MP3 players, and personal digital assistant (PDA) applications. It requires an input voltage of 3.5 - 6.5 V and an input current of 40 µA. This charger integrates a high-voltage input protection, thereby allowing it to handle an input surge voltage of up to +28 V. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 1 F Electrochemical Double-Layer Capacitor for Energy Harvesting Applications | |
Supercapacitor
from Kyocera AVX
|
| The SCCR12B105SRB from Kyocera AVX is a Cylindrical Electrochemical Double-Layer Capacitor that is ideal for camera flash systems, energy harvesting, UPS, industrial, wireless alarms, remote metering, scanners, toys and games, GSM and GPRS pulse applications. It has a capacitance of 1 F and a capacitance tolerance of +30%/-10%. This supercapacitor has a voltage rating of 2.7 V and an equivalent series resistance (ESR) of less than 150 milli-ohms. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 800 V Triac for AC Switching Applications | |
Triac
from Fagor Electronica
|
| The FT1010NW00TU from Fagor Electronica is a Triac that is ideal for general-purpose AC switching applications. It has a break-over voltage of 800 V and a break-over current of less than 100 A. This thyristor has a gate trigger voltage of up to 1.3 V and a gate trigger current of 25 mA. It can handle medium current levels and has a low thermal resistance. This RoHS-compliant triac with low forward voltage drop is suitable for automated placement. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
| 6800 µF Aluminium Electrolytic Capacitor for Industrial Applications | |
Supercapacitor
from Panasonic Corporation
|
| The ECEA1EN221UB from Panasonic Corporation is an Aluminium Electrolytic Capacitor that has been designed for industrial applications. It has a capacitance of up to 6800 µF and a capacitance tolerance of ±20%. This RoHS-compliant capacitor has a voltage rating of less than 50 V. It offers high endurance and is rated to operate at 85°C for up to 2000 hours. This capacitor is available in a through-hole package that measures 18 x 35.5 mm. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 4.7 µH Square Shielded Power Inductor for Large Current Applications | |
Power Inductor
from Venkel
|
| The SSPI575730-4R7NU from Venkel is a Square Shielded Power Inductor that is ideal for large current applications. This inductor has an inductance of 4.7 µH and an inductance tolerance of 30%. It has a saturation current of 2 A and a direct current resistance (DCR) of 37 milli-ohms. This miniature chip inductor features a high-quality ferrite core and is magnetically shielded to enhance performance and reduce electromagnetic interference. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 60 kW Electric Drive Axle for 4.5T-6T Lightweight Truck Applications | |
Electric Axle
from Brogen EV Solution
|
| The Z0035AETS from Brogen EV Solution is an Electric Drive Axle that has been designed for 4.5T - 6T lightweight trucks. It delivers a continuous output power of 60 kW and a peak output power of 120 kW. This axle provides a torque of less than 335 Nm and has a speed of up to 12000 rpm. It integrates a permanent magnet synchronous motor (PMSM) into the rear axle to reduce the system weight by approximately 20%. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 50 A Power Fuse for Electric Vehicle Applications | |
EV Fuse
from Littelfuse
|
| The 10EV050.ZXPCB from Littelfuse is a Power Fuse that has been designed to protect circuits in electric vehicles and hybrid passenger vehicles. It has a voltage rating of 500 V and a current rating of 50 A. This RoHS-compliant fuse link can handle a breaking current surge of 20 kA. It employs diffusion pill technology to provide time-delayed protection to circuits. This UL-94-rated fuse link has its terminal in tin-plated copper alloy /nickel-plated copper alloy. |
| |
Download Datasheet |
Product Details | |
|
|
|
| IP6K9K-Rated Vehicle Control Unit for Electric Vehicle Applications | |
EV ECU
from AEM Electronics
|
| The VCU300 from AEM Electronics is a Vehicle Control Unit that has been designed to control all critical vehicle systems such as an inverter, pre-charge resistors, high voltage contactors, DC-DC converter, onboard charger, and battery management system. It requires an input voltage of 9 - 16 V. This vehicle control unit integrates multiple high-performance components to provide advanced data acquisition and control capabilities. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Logic-Controlled High-Side Load Switch IC for Portable Applications | |
Power Switch IC
from Analog Devices
|
| The ADP198 from Analog Devices is a Logic Controlled High-Side Load Switch that is ideal for mobile phones, digital cameras, audio devices, and other portable, battery-powered equipment applications. This switch requires an input voltage of 1.65 – 6.5 V and an input current of 1 A. It includes a low-resistance P-channel MOSFET to ensure minimal voltage drop and features reverse current blocking to prevent reverse power flow. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by European Automotive Circular Economy Summit 2025 | | European Automotive Circular Economy Summit 2025 | | The European Automotive Circular Economy Summit 2025 will explore strategies for reducing waste, promoting recycling, and extending the lifecycle of automotive products through innovative design and manufacturing processes. Key topics include sustainable material innovation, advancements in recycling technologies, remanufacturing practices, and the integration of digital tools to enhance efficiency and traceability in supply chains.Click here to learn more. | | | |
|
|
| 100 V Automotive-Qualified E-Mode GaN-on-Si Power Transistor | |
GaN Power Transistor
from Innoscience
|
| The INN100W800A-Q from Innoscience is an Automotive-Qualified Enhancement Mode GaN-on-Silicon Power Transistor that is ideal for high power density DC-DC converters, Class-D audio, high-intensity headlamps, and LiDAR applications. This transistor has a drain-source voltage of up to 100 V, a gate threshold voltage of less than 1.1 V, and a drain-source on-resistance of 80 milli-ohms. It has a continuous drain current of up to 1.7 A. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Automotive-Qualified Magnetically-Shielded Power Inductor | |
Power Inductor
from CODACA Electronic
|
| The CSEB0550H-8R2M from CODACA Electronic is an Automotive-Qualified Molded Power Inductor that is ideal for DC/DC converters, noise suppression in motors, PDAs, notebooks, desktops, and server applications. It has an inductance of 8.2 µH and an inductance tolerance of ±20%. This AEC-Q200-qualified inductor has a saturation current of up to 4.7 A and a dynamic contact resistance of less than 34.6 milli-ohms. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 1400 V Phase Control Thyristor for Power Supply Applications | |
Silicon Controlled Rectifier
from Powerex
|
| The C451PD from Powerex is a Phase Control Thyristor that has been designed for phase control applications. It has a break-over voltage of up to 1400 V and a break-over current of less than 1500 A (average). This thyristor has a gate trigger voltage of up to 5 V and a gate trigger current of 200 mA. It includes a proven amplifying gate to enhance trigger sensitivity. This SCR thyristor has low on-stage voltage, high di/dt and dv/dt capability. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 1.5 kW True Sinewave DC-AC Power Inverter for Household Applications | |
DC to AC Inverter
from Mean Well
|
| The NTS-1700-124UN from Mean Well is a True Sinewave DC-AC Power Inverter that converts a DC input voltage of 24 V to an AC output voltage of 100/110/115/120 V. It delivers an output power of 1500 W (continuous) and 2200 W (peak). This power inverter is a highly reliable off-grid solution that consists of a digital design with microcontroller control, streamlined control circuitry, a high-quality fan, and built-in protection circuits. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 1 W Isolated DC-DC Converter | |
DC to DC Converter
from Recom Power
|
| The R1SE-0505-R from Recom Power is an Isolated DC-DC Converter that converts an input voltage of 5 V to an output voltage of 5 V. It delivers an output power of 1 W and has an efficiency of 75%. This converter is low in cost compared to equivalent converters. It provides an isolation voltage of 1 kV (DC) for 1 second. This DC-DC converter benefits from high-volume production and has undergone semi-automatic assembly that allows for a lower selling price. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 36 V Diac for AC Switching and Control Applications | |
Diac
from Diotec Semiconductor
|
| The DB32 from Diotec Semiconductor is a Diac that is ideal for triggering triacs and thyristors, AC switches and controls, dimmer circuits, and commercial-grade applications. It has a break-over voltage of up to 36 V and a break-over current of less than 200 µA. This diac has a power dissipation of less than 150 mW. It can conduct in both directions, thereby providing bidirectional switching operations, and is protected against false triggers by light. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by European Automotive Circular Economy Summit 2025 | | |
|
|
| 150 V Enhancement Mode GaN Power Transistor for Charging Applications | |
GaN Power Transistor
from Nexperia
|
| The GANE3R9-150QBAZ from Nexperia is an Enhancement Mode GaN Power Transistor that is ideal for high power density and high-efficiency power conversion, secondary stage AC-to-DC converters, high-frequency DC-to-DC converters in 48 V systems, fast battery charging, mobile phone, laptop, tablet, USB type-C chargers, datacom and telecom (AC-to-DC and DC-to-DC) converters, motor drives, LiDAR (non-automotive), and Class D audio amplifier applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| -20 V P-Channel Power MOSFET for High-Speed Switching Applications | |
MOSFET
from Torex Semiconductor
|
| The XP152A12C0MR from Torex Semiconductor is a P-Channel Power MOSFET that has been designed to support high-speed switching operations while saving energy. It has a drain-source voltage of up to -20 V, a gate-source voltage of ±12 V, and a drain-source on-resistance of 230 milli-ohms. This MOSFET has a continuous drain current of up to -0.7 A and a power dissipation of less than 0.5 W. It integrates a gate protection diode to counter static build-up. |
| |
Download Datasheet |
Product Details | |
|
