| Featured Products this Week |
|
|
| Automotive-Qualified Power Inductor for Handheld Applications | |
Power Inductor
from AiT Semiconductor
|
| The PIP10070-3R9MQ from AiT Semiconductor is an Automotive-Qualified Power Inductor that is ideal for mobile devices, panels, low-profile devices and handheld device applications. This inductor has an inductance of 3.9 µH and an inductance tolerance of ±20%. It has a dynamic contact resistance (DCR) of 17 milli-ohms. This AEC-Q200-qualified low-profile inductor features a surface mount device (SMD) drum choke for a power line or signal line. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.5 A Negative Temperature Coefficient Current Limiter for Ballast Applications | |
Inrush Current Limiter
from ZONKAS ELECTRONIC
|
| The ZMF21300MD13SPB from ZONKAS ELECTRONIC is a Negative Temperature Coefficient Inrush Current Limiter that is ideal for switching power supply, UPS power supply, ballast, circuitry, and power supply applications. It has a current rating of 2.5 A and a resistance of 30 Ohms. It protects electrical systems by mitigating the impact of potentially harmful power surges. This RoHS-compliant limiter is available in a through-hole package measuring 14.5 x 6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 kW Electric Drive Axle for 4.5T-6T Truck Applications | |
Electric Axle
from Brogen EV Solution
|
| The DEH220 from Brogen EV Solution is an Electric Drive Axle that has been designed for 4.5T-6T lightweight trucks. It delivers an output power of up to 60 kW. This axle provides a torque of less than 5800 Nm and has a speed of up to 105 km/hr. It integrates a permanent magnet synchronous motor (PMSM) into the rear axle, which reduces the system weight and enhances vehicle dynamics with improved efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
| Enhancement Mode GaN Power Transistor for PV inverter Applications | |
GaN Power Transistor
from Cambridge GaN Devices
|
| The CGD65C025SP2 from Cambridge GaN Devices is an Enhancement Mode GaN Power Transistor that is ideal for industrial, datacentre and telecom SMPS, industrial motor drives, PV inverters, uninterruptible power supplies, and energy storage systems applications. This transistor has a drain-source voltage of up to 650 V, a gate-source voltage from -1 V to +20 V, and a drain-source on-resistance of 25 milli-ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Field Stop Trench IGBT for UPS Applications | |
IGBT
from Microchip Technology
|
| The APTGT100TA120TPG from Microchip Technology Field Stop Trench IGBT is ideal for welding converters, switched-mode power supplies, uninterruptible power supplies, and motor control applications. It has a collector-emitter breakdown voltage of up to 1200 V, a gate threshold voltage of 5.8 V, and a saturated collector-emitter voltage of 1.7 V. This IGBT has a continuous collector current of up to 140 A and a peak collector current of less than 200 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Phase Surge Voltage Arrester for Power Supply Applications | |
Surge Suppression IC
from Weidmuller
|
| The 2807430000 from Weidmuller is a Single-Phase Surge Voltage Arrester that has been designed to efficiently minimize the possibility of interference coupling induced by transient surge voltages, even well below the limitations specified by the insulation coordination standards DIN VDE 0110-3 / EN 60664-3. It requires an input voltage of 230/400 V and can withstand a short-circuit current of up to 100 kA. This surge suppressor is tested according to product standard IEC 61643-11. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 660 W Poly-Crystalline Solar Panel | |
Solar Panels
from SPS istem
|
| The H12 660M from SPS istem is a Polycrystalline Solar Panel. This solar panel delivers an output power of 660 W and has an efficiency of 21.23%. It provides an output voltage of 37.90 V and an output current of 17.42 A. This IEC 61215 and IEC 61730-certified solar panel features an IP68 junction box for weather protection and benefits from anti-reflective coating. It is designed with an anti-hail module and an anti-hotspot ability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V N-Channel Enhancement Mode Power MOSFET | |
MOSFET
from Cystech Electronics
|
| The MTE4D5N04J3-0-T3-G from Cystech Electronics is an N-Channel Enhancement Mode Power MOSFET ideal for fast-switching applications. It has a drain-source breakdown voltage of over 40 V, a gate threshold voltage of more than 2 V, and a drain-source on-resistance of 4.2 milli-ohms. This power MOSFET has a continuous drain current of up to 16 A and a pulsed drain current of less than 172 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.4 A Current Surge Limiter for Renewable Energy Applications | |
Inrush Current Limiter
from Ametherm
|
| The SL15 16004 from Ametherm is an Inrush Current Limiter that is ideal for residential, commercial, healthcare, renewable energy, industrial, and electric vehicle applications. It has a current rating of 4.4 A and a resistance of 16 Ohms. This surge limiter has an energy rating of 50 J to eliminate abrupt voltage spikes effectively. It protects electrical systems by mitigating the impact of potentially harmful power surges. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Automotive-Qualified Schottky Barrier Diode | |
Power Diode
from ROHM Semiconductor
|
| The SCS210ANHRTRL from ROHM Semiconductor is an Automotive-Qualified Schottky Barrier Power Diode that is ideal for on-board chargers, EV chargers, DC/DC converters, and wireless charger applications. It has a forward voltage of 1.35 V and a forward current of less than 10 A. This diode has a reverse voltage of up to 650 V and a reverse current of less than 200 µA. It features a low forward voltage, thereby leading to reduced power losses. |
| |
Download Datasheet
Product Details | |
|
|
|
| Power Management IC for Wearable Applications | |
PMIC
from ORCA SEMICONDUCTOR
|
| The OS1000-WAA from ORCA SEMICONDUCTOR is a Power Management IC that is designed for wearable devices that demand high efficiency and very low-quiescent current operation. It requires an input voltage of 8 - 36 V. This power management IC (PMIC) features a linear Li+ battery charge management system, two low quiescent buck regulators, and two low quiescent low dropout (LDO) linear regulators. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Full-Bridge DMOS Motor Driver IC | |
Motor Driver IC
from Allegro MicroSystems
|
| The A4950KLJTR-T from Allegro MicroSystems Full-Bridge DMOS Motor Driver has been designed for pulse width modulated (PWM) control of DC motors. It requires an input voltage of up to 40 V and provides an output current of ±3.5 A. This driver utilizes input terminals for controlling the speed and direction of a DC motor using externally applied PWM control signals. It features an internal synchronous rectification control circuitry to reduce power dissipation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | London EV Show 2024 | | The London EV Show is just a few days away. This event offers a prime opportunity for networking, showcasing, and experiencing the latest advancements in the broader automotive industry. Don't miss out and seize the opportunity by claiming your free pass today. Free visitor registrations are now open! Get your Free Visitor Pass here. | | | |
|
|
| Power Application Controller for BLDC Motor Control Applications | |
PMIC
from Qorvo
|
| The PAC5556QX from Qorvo is a Power Application Controller that is designed for high-voltage, high-speed brushless DC (BLDC) or permanent magnet synchronous motor (PMSM) motor control. It requires an input voltage of 82 - 600 V. This power management IC (PMIC) features proprietary configurable analog front-end with ten analog front-end I/O pins, three differential programmable gain amplifiers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 113 dB Dual-Channel Rail-to-Rail CMOS Operational Amplifier | |
Power Operational Amplifier
from Nisshinbo Micro Devices
|
| The NL6002ANAE2D from Nisshinbo Micro Devices is a Dual-Channel Rail-to-Rail Precision Power Operational Amplifier that is ideal for battery-powered equipment and as sensor amplifiers in strain gage, thermopile, flow, and photodiode amplifier applications. It requires a supply voltage of 1.6 - 5.5 V and an input offset and bias current of 1 pA. This op-amp provides an output current of 20 mA, a large signal voltage gain of 113 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2000 W AC-DC Converter for Laboratory Applications | |
AC to DC Converter
from Camtec Power Supplies
|
| The CPS-i2000.018(R2) from Camtec Power Supplies is an AC-DC Converter that steps down an AC input voltage of 184 - 264 V to a DC output voltage of 0 -18 V. It delivers an output power of 2000 W and has an efficiency of up to 94%. This IEC61709-certified converter offers optional LAN interface plug-and-play and 3D heat dissipation. It features reference voltage autonomous programming, real-time I/V programming, and real-time I/V monitoring. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad-Channel High-Side Power Switch for Power Distribution Applications | |
Power Switch IC
from Infineon Technologies
|
| The ITS4130Q-EP-D from Infineon Technologies is a Quad Channel Smart High-Side Power Switch that has been designed to ensure integrated protection and diagnosis on the high side. It requires an input voltage of 5 - 45 V and provides an output current of up to 650 mA. This JEDEC-rated switch has all control inputs 24 V capable and supports a direct interface to optocouplers. It has all its control inputs 3.3 V and 5 V logic level compatible. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Conductive Polymer Hybrid Aluminum Electrolytic Capacitor | |
Supercapacitor
from Taiyo Yuden
|
| The RAHV1220M1REH0002 from Taiyo Yuden is an Automotive-Qualified Conductive Polymer Hybrid Aluminum Electrolytic Capacitor that is ideal for automotive powertrain and safety applications. It has a capacitance of 22 µF and a capacitance tolerance of ±20%. This capacitor has a voltage rating of 80 V and an impedance of less than 45 milli-ohms. It is in the mass production lifecycle stage ensuring efficiency and cost-effectiveness in production. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Isolated Gate Driver for UPS Applications | |
Gate Driver
from STMicroelectronics
|
| The STGAP3SXS from STMicroelectronics is a Single-Channel Isolated Gate Driver that has been designed to provide galvanic isolation between the gate driving channel, the low voltage control, and interface circuitry. It requires an input voltage of 5 - 32 V. This gate driver includes multiple options supporting source/sink current of 10 A and 6 A each of which is available with dedicated under-voltage lockout (UVLO) variants for SiC MOSFETs and IGBTs. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | |
|
|
| 700 W Isolated AC-DC Converter for Commercial Aircraft Applications | |
AC to DC Converter
from SynQor
|
| The APFIC-115-3PH-12D-FT-C-G from SynQor is a Three-Phase Isolated AC-DC Converter that steps down an AC input voltage of 575 V to a DC output voltage of 12 V. It delivers an output power of up to 700 W and has an efficiency of 92%. This converter is designed for compatibility with commercial aircraft systems operating at variable frequencies. It offers minimal inrush current, balanced phase currents, and a high power factor while maintaining harmonic content. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 kW DC Charging Controller for Electric Vehicle Applications | |
EV ECU
from innolectric AG
|
| The D3C from innolectric AG is a DC Charger Controller Unit that has been designed for use as the central communication unit in electric vehicles. It delivers an output power of more than 500 kW. This controller can be used either as a standalone unit or part of the innolectric’s on-board charger for customer applications. It complies with the relevant standards such as IEC 61851, ISO 15118-20, and DIN SPEC 70121 for charging communication. |
| |
Download Datasheet
Product Details | |
|
