| Featured Products this Week |
|
|
| Dual-Channel Operational Amplifier for Data Acquisition Applications | |
Power Operational Amplifier
from Analog Devices
|
| The LT1358IS8#TRPBF from Analog Devices is a Dual-Channel High-Speed Operational Amplifier that has been designed to drive all types of capacitive loads. It requires a supply voltage of ±2.5 V/±5 V/±15 V, an input offset current of 40 nA, and an input bias current of 120 nA. This op-amp provides an output current of 30 mA, a large signal voltage gain of 65 V/mV, and has a common-mode rejection ratio (CMRR) of 97 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Single Channel High-Side Power Switch | |
Power Switch IC
from Infineon Technologies
|
| The BTG7016A1EPWXUMA1 from Infineon Technologies is an Automotive-Qualified Single Channel High-Side Power Switch that has been designed for wire protection in modern automotive E/E architectures. It requires an input voltage of 2.75 - 28 V and provides a output current of 6.8 A (continuous). This AEC-Q100 Grade-1-qualified power switch offers selectable integrated I²t function for wire harness protection and has a sequential diagnosis for status readout via IS pin. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.7 µF Automotive-Qualified Multilayer Ceramic Capacitor | |
Power Capacitor
from Kyocera AVX
|
| The KAM31GR71H475KU from Kyocera AVX is an Automotive-Qualified Multilayer Ceramic Capacitor that has been designed to meet the rigorous demands of the automotive industry. It has a capacitance of 4.7 µF and a capacitance tolerance of ±10%. This capacitor has a voltage rating of up to 50 V. It is plated with a Nickel/Tin finish, ensuring excellent solderability and long-term durability. This AEC-Q200-qualified capacitor is available in a surface-mount package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 A EV Power Fuse for Auxiliary Electrical System Applications | |
EV Fuse
from Eaton
|
| The XEV10-30 from Eaton is an Electric Vehicle Power Fuse that has been designed to protect auxiliary electrical systems. It has a voltage rating of 500 V and a current rating of 30 A. This RoHS-compliant fuse link can handle a breaking current surge of 20 kA. It provides full range protection for overload and high fault current conditions, protecting at as low as 135% overload. This IATF 16949-complaint fuse link can selectively be coordinated with upstream battery. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Enhancement Mode GaN Power Transistor for Wireless Power Applications | |
GaN Power Transistor
from Taiwan Semiconductor
|
| The TSG65N190CR RVG from Taiwan Semiconductor is an Enhancement Mode GaN Power Transistor that is ideal for power adapters, LED lighting drivers, fast battery charging, power factor correction, appliance motor drives, wireless power transfer, and power supply applications. This GaN transistor has a drain-source voltage of up to 650 V, a gate threshold voltage of 1.7 V, and a drain-source on-resistance of 150 milli-ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 V NPN Bipolar Junction Transistor for Switching Applications | |
Bipolar Junction Transistor
from Diotec Semiconductor
|
| The BC546A from Diotec Semiconductor is an NPN Bipolar Junction Transistor that is ideal for signal processing, switching, and amplification applications. It has a collector-emitter breakdown voltage of over 65 V, a base-emitter voltage of 660 mV, and a collector-emitter saturation voltage of less than 200 mV. This transistor has a collector current of up to 100 mA and a peak collector of less than 200 mA. This RoHS-compliant transistor is available in a through-hole package. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| ±5 mA DC Current Transducer for Isolated Measurement Applications | |
Current Transducer
from Eltime Controls
|
| The EDCC-CX-E2-X5 from Eltime Controls is a DC Current Transducer that has been designed to provide isolated DC current measurements and deliver a proportional DC (in mA) output. It requires an input current of ±1 mA/±10 A. This current transducer provides an output current from -5 mA to +5 mA. It supports adjustable span and zero calibration with an accuracy class of 0.25. This transducer offers an isolation voltage of 4 kV (RMS) (for 1 minute). |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 W Isolated Buck DC-DC Converter | |
DC to DC Converter
from Cincon Electronics
|
| The DH15W10-800S05P from Cincon Electronics is an Isolated Buck DC-DC Converter that converts an input voltage of 800 V to an output voltage of 5 V. It delivers an output power of 15 W and has an efficiency of 73.5%. This converter provides an isolation voltage of 4 kV (DC) for 1 minute, which ensures an accurate performance. This MIL-STD-810F compliant DC-DC converter has regulated outputs, making them suitable for sensitive electronics applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thermoplastic Encapsulated Varistor for Remote Control Applications | |
Varistor
from KEMET Corporation
|
| The VP3225K401R230 from KEMET Corporation is a Thermoplastic Encapsulated Varistor that has been designed to protect electronic equipment against high voltage surges occurring in the low and medium voltage region. It has an AC voltage rating of 230 V, a DC voltage rating of 300 V, and a clamping voltage of 595 V. This varistor offers direct surface-mount equivalents to leaded disc varistors that come in 5 mm and 7 mm sizes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bipolar Stepping Motor Driver for Robotics Applications | |
Motor Driver IC
from ROHM Semiconductor
|
| The BD63920MUV from ROHM Semiconductor is a Bipolar Stepping Motor Driver that has been designed to be driven by a pulse width modulation (PWM) current signal. It requires an input voltage of 8-36 V and provides an output current of less than 2 A. This motor driver adopts CLK-IN and PARA-IN driving mode for input interface, making it versatile for various applications. It supports excitation mode that corresponds to full step mode, half step mode and quarter step mode. |
| |
Download Datasheet
Product Details | |
|
|
|
| 350 W DC-AC Power Inverter for Medical Applications | |
DC to AC Inverter
from Tripp Lite
|
| The HCINT350SNR from Tripp Lite is a DC-AC Power Inverter that converts a DC input voltage of 12 V to an AC output voltage of 230 V. It delivers an output power of 350 W (continuous/peak). This inverter consists of an isolation transformer to meet IEC 60601-1 standards, ensuring safety by reducing cumulative shock potential and making it suitable for various healthcare sectors. It includes a three-stage charging system that enables faster and safer battery recharging. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Enhancement Mode GaN-on-Silicon Power Transistor | |
GaN Power Transistor
from Teledyne e2v HiRel Electronics
|
| The TDG650E15BEP from Teledyne e2v HiRel Electronics is an Enhancement Mode GaN-on-Silicon Power Transistor that is ideal for high-efficiency power conversion, high-density power conversion, AC-DC converters, bridgeless totem-pole PFC, ZVS phase-shifted full bridge, half & full bridge topologies, uninterruptable power supplies, motor drives, single and three-phase inverter legs, solar and wind power, fast battery charging and DC-DC converters. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Automotive Circular Economy Summit 2025 | | European Automotive Circular Economy Summit 2025 | | The European Automotive Circular Economy Summit 2025 is set to be a pivotal gathering for industry leaders, policymakers, and innovators dedicated to transforming the automotive sector. This summit addresses the urgent need for sustainable practices in the face of escalating environmental challenges and resource constraints. Click here to learn more. | | | |
|
|
| 85 W Off-Line CV/CC ZVS Flyback Switcher IC | |
Power Switch IC
from Power Integrations
|
| The INN4074C-H186 from Power Integrations is an Off-Line CV/CC ZVS Flyback Switcher IC that integrates with ClampZero family of active clamp ICs to dramatically improve the efficiency of flyback power converters, particularly those requiring a compact form-factor. This switcher IC requires an input voltage of 85-264 V and delivers an output power of 85 W. It combines a high-voltage power switch with both primary and secondary side controllers in a single device. |
| |
Download Datasheet
Product Details | |
|
|
|
| Li-ion/Li-Polymer Linear Battery Charger IC for Portable Device Applications | |
Battery Management IC
from Monolithic Power Systems
|
| The MP2731 from Monolithic Power Systems is a Li-ion/Li-Polymer Linear Battery Charger that is ideal for tablet PCs, smartphones, wireless cameras, and other portable devices. It requires an input voltage of 3.7 - 16 V and an input current of 4.5 A. This charger has a low-impedance power path that optimizes efficiency, reduces battery charging time, and extends battery life. It works with NVDC Power Path Management that offers instant-on works with no battery. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1750 W Modified Sine Wave Inverter for Consumer Applications | |
DC to AC Inverter
from Samlex America
|
| The PSE-12175A from Samlex America is a Modified Sine Wave Inverter that converts a DC input voltage of 12 V to an AC output voltage of 120 V. It delivers an output power of up to 1750 W and has an efficiency of 85-90%. This inverter has a high-efficiency pulse width modulation (PWM) design to achieve high output quality and possess better control over electromagnetic interference (EMI). It is offered with a set of battery cable lugs. |
| |
Download Datasheet
Product Details | |
|
|
|
| AC-DC LED Driver IC for Backlighting Applications | |
LED Driver IC
from AiT Semiconductor
|
| The A9910M8R from AiT Semiconductor is an AC-DC LED Driver IC that has been specifically designed for reliable operation of high-brightness (HB) LEDs. It requires an input voltage of 10 - 600 V. This LED driver operates by controlling an external MOSFET at fixed switching frequencies of up to 300 kHz using a single resistor. It features a rugged high-voltage junction isolated process that is capable of withstanding input voltage surges of up to 600 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V N-Channel Enhancement Mode Power MOSFET | |
MOSFET
from STMicroelectronics
|
| The STL300N4F8 from STMicroelectronics is an N-Channel Enhancement Mode Power MOSFET that is ideal for power supplies, power converters, industrial tools, motor drives, industrial equipment, and industrial motor control applications. It has a drain-source breakdown voltage of over 40 V, a gate threshold voltage of up to 4 V, and a drain-source on-resistance of less than 0.85 milli-ohms. This MOSFET is designed using STripFET F8 technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4.5 V Snap Back ESD Protection Diode | |
Power Diode
from Micro Commercial Components
|
| The ESDSBHC4V5P6B-TP from Micro Commercial Components is a Snap Back ESD Protection Diode that has been designed to protect a single power line. It has a repetitive peak reverse voltage of up to 4.5 V and a reverse breakdown voltage of over 4.8 V. This diode handles a peak power (pulsed) of less than 3510 W and ensures very low leakage current and clamping voltage. It is rated to moisture sensitivity level 1 (MSL1) for high reliability. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Automotive Circular Economy Summit 2025 | | |
|
|
| 35 W Thick Film Power Resistor for Rectifier Applications | |
Power Resistor
from Bourns
|
| The PF2203-100RF1 from Bourns is a Thick Film Power Resistor that is ideal for power supplies, motor drives, test and measurement equipment, rectifiers, capacitor discharging, snubber circuits, current limiting, and heater applications. This power resistor has a resistance in the range of 20 milli-ohms to 51 kilo-Ohms and a resistance tolerance of ±1%. It has a power rating of up to 35 W. This RoHS-compliant resistor is designed based on a non-inductive structure. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 kW Electric Drive Axle for 4.5T-6T Truck Applications | |
Electric Axle
from Brogen EV Solution
|
| The DEH220 from Brogen EV Solution is an Electric Drive Axle that has been designed for 4.5T-6T lightweight trucks. It delivers an output power of up to 60 kW. This axle provides a torque of less than 5800 Nm and has a speed of up to 105 km/hr. It integrates a permanent magnet synchronous motor (PMSM) into the rear axle, which reduces the system weight and enhances vehicle dynamics with improved efficiency. This e-axle has a modular design. |
| |
Download Datasheet
Product Details | |
|
