| Featured Products this Week |
|
|
| N-Channel Power MOSFET for Hot-Swap Applications | |
MOSFET
from Infineon Technologies
|
| The IPB033N10N5LFATMA1 from Infineon Technologies is a Linear N-Channel Power MOSFET that is ideal for hot-swap and e-fuse applications. It has a drain-source breakdown voltage of over 100 V, a gate threshold voltage of up to 4.1 V, and a drain-source on-resistance of less than 3.30 milli-ohms. This JEDEC-qualified MOSFET has a continuous drain current of up to 159 A and a power dissipation of less than 179 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 kW Digital AC-DC Converter | |
AC to DC Converter
from Advanced Energy Industries
|
| The 83-105-0001W from Advanced Energy Industries is an AC-DC Converter that steps down an AC input voltage of 90-264 V to a DC output voltage of 48 V. It delivers an output power of up to 2400 W and has an efficiency of 90%. This converter consists of multiple output slots and can be configured to enable fast prototypes. It is equipped with active power factor correction, fan speed control, output on/off control, and remote voltage sensing, ensuring a stable output voltage. |
| |
Download Datasheet
Product Details | |
|
|
|
| IEEE 802.3-Compliant Dual MOSFET Bridge Rectifier | |
Power Over Ethernet IC
from Kinetic Technologies
|
| The KTA1170GVAE-TB from Kinetic Technologies is an IEEE 802.3bt/af/at-Compliant Dual MOSFET Bridge Rectifier that has been designed for voltage rectification in power-over-ethernet (PoE) devices. It requires an input voltage of 38 V and an input power of up to 90 W. This bridge rectifier consists of two diode rectifier circuits, a low-side driver, a high-side driver, a bias, and a driver logic circuit. It is available in a surface-mount package that measures 4 x 4 x 0.75 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 24-Bit Isolated Shunt Current Sensor for Battery Applications | |
Current Transducer
from Bourns
|
| The SSD-500A-C from Bourns is a 24-Bit Isolated Shunt Current Sensor that has been designed for high-precision DC current measurements. This current transducer requires a supply voltage of 5- 60 V and an input current from -500 A to +500 A. It has an accuracy of ±0.1%. This current transducer provides a reinforced galvanic isolation rated at 1500 V (DC) that ensures safe operation in high-voltage environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 110 V Power Relay for UPS Applications | |
Power Switch IC
from OMRON Corporation
|
| The G2RG-2A4 from Omron is a Power Relay that is ideal for PV/EA equipment and uninterruptible power supply (UPS) applications. It has a voltage rating of 110 V (DC) and a current rating of 5 A. This power relay consists of a coil and multiple double pole single throw (DPST) switch contacts. It offers high insulation between the coil and contacts with an insulation distance of 8 mm and an impulse withstanding voltage of 10 kV. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 V Enhancement-mode GaN-on-Silicon Power Transistor | |
GaN Power Transistor
from Innoscience
|
| The INN150EQ032A from Innoscience is an Enhancement-Mode GaN-on-Silicon Power Transistor that is ideal for high-frequency DC-DC converters, solar systems optimizers and microinverters, PD chargers and PSU synchronous rectification, telecom power supplies, and motor driver applications. This transistor has a drain-source voltage of over 150 V, a gate threshold voltage of 1.1 V, and a drain-source on-resistance of less than 3.9 milli-ohms. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 3rd European Automotive Decarbonization and Sustainability Summit 2025 | | | |
|
|
| Passively-Balanced Supercapacitor for Automotive Applications | |
Supercapacitor
from Tecate Group
|
| The PBLH-12R0/87ST from Tecate Group is a Passively-Balanced Supercapacitor that is ideal for automotive and heavy-duty vehicle subsystems, windmill pitch control systems, and wireless transmission systems applications. It has a capacitance of 87 F and a capacitance tolerance of ±20%. This supercapacitor has a voltage rating of 12 V, a current rating of 164 A, and an equivalent series resistance (ESR) of 25 milli-ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Cordless Current Sensor | |
Current Transducer
from Melexis
|
| The MLX91235 from Melexis is an Automotive-Qualified Coreless Current Sensor that has been designed to provide immunity to stray fields and achieve high accuracy measurements. This transducer requires a supply voltage of 3.3 - 5 V (DC). It provides an output current from 200 A to 10000 A. This monolithic sensor has a coreless design that eliminates the need for external ferromagnetic elements (like C-cores or U-shields). |
| |
Product Details | |
|
|
|
| Automotive-Qualified Load Switch IC for ADAS Applications | |
Power Switch IC
from Diodes Incorporated
|
| The AP22919Q from Diodes Incorporated is an Automotive-Qualified Load Switch IC that has been designed to simplify automotive system power management and sequencing operations. It requires an input voltage of 1.6-5.5 V and provides an output current of up to 1.5 A. This load switch integrates a 90 milli-ohms (drain-source on-resistance) MOSFET at the high side to provide cost-effective power management for light-load applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 3rd European Automotive Decarbonization and Sustainability Summit 2025 | | |
|
|
| Automotive-Qualified Photo Relay Power Switch IC | |
Power Switch IC
from Toshiba
|
| The TLX9150M from Toshiba is an Automotive-Qualified Photo Relay Power Switch IC that has been designed for automotive and battery control applications. It requires an input voltage of up to 720 V. This IC integrates an infrared emitting diode, which is then optically coupled to a photo-MOSFET. It features a normally open (1-Form-A) switch configuration, which makes it ideal for high-voltage switching operations. |
| |
Download Datasheet
Product Details | |
|
