| Featured Products this Week |
|
|
| 40 V Bidirectional GaN Transistor | |
GaN Power Transistor
from Infineon Technologies
|
| The IGK080B041S from Infineon is a Normally-off Bidirectional GaN Transistor that is ideal for high-side load switches, overvoltage protection (OVP) in smartphone USB ports, and switch circuits in multi-power supply systems applications. It has a continuous drain-to-drain voltage and drain-to-gate voltage of 40 V. This JEDEC-qualified transistor has a continuous drain current of 14 A, a pulsed drain current of 70 A and a total gate charge of up to 5.5 nC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.3 V Snap Back ESD Protection Diode | |
Power Diode
from Micro Commercial Components
|
| The ESDSBSLC3V3LT-TP from Micro Commercial Components is a Snap Back ESD Protection Diode that is designed to safeguard signal lines from electrostatic discharges. It has a reverse voltage of up to 3.3 V and a reverse current of 0.2 μA. This RoHS-compliant ESD protection diode is designed based on Snap Back technology. It has low clamping voltage and low leakage current and is IEC 61000-4-2 certified to ensure reliable operation when subject to ESD events. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V N-Channel MOSFET | |
MOSFET
from onsemi
|
| The FCA20N60F from onsemi is an N-Channel MOSFET. It has a drain-source breakdown voltage of over 600 V, a gate threshold voltage of up to 5 V, and a drain-source on-resistance of less than 190 milli-ohms. This avalanche-tested MOSFET is designed using onsemi's first-generation SUPERFET technology which employs charge balance technique to achieve low on-resistance and reduced gate charge. It integrates a body diode. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Automotive-Grade DC-DC Buck Converter | |
DC to DC Converter
from Power Integrations
|
| The INN3947FQ-TL from Power Integrations is an Automotive Grade DC-DC Buck converter that converts an input voltage of 40-1200 V to an output voltage of 5-24 V. It delivers an output power of up to 50 W and has an efficiency of less than 95%. This converter combines a multi-mode valley-switching DCM/CCM flyback controller, switch, and secondary-side sensing within a single compact package. It utilizes FluxLink technology that provides reinforced isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Four Terminal Current Sense Power Resistors | |
Power Resistor
from Littelfuse
|
| The L4CA Series from Littelfuse are Four Terminal Current Sense Power Resistors designed for power management and low ESL (equivalent series inductance) applications. They have a resistance as low as 0.5 milli-ohms, a resistance tolerance of ±1% and a power rating of 1 W. These compact chip resistors are fabricated using ceramic substrate and have separate voltage sensing terminals. They exhibit excellent performance in resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 47 MHz High-Speed Operational Amplifier | |
Power Operational Amplifier
from STMicroelectronics
|
| The TSB952IDT from STMicroelectronics is a High-Speed Operational Amplifier. It requires a supply voltage of 4.5-36 V and has an input current of less than 10 mA. This operational amplifier has an offset voltage of ±3mV and a gain bandwidth product of up to 52 MHz. It includes an input common-mode voltage range that reaches the ground and is built to withstand harsh environments with its extended operating temperature range of -40 °C to +125 °C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified Programmable Current Sensor | |
Current Transducer
from Allegro MicroSystems
|
| The CT455-A00B3-TS08 from Allegro MicroSystems is an Automotive-Qualified Programmable Contactless Current Sensor that is designed to perform high-accuracy current measurements for consumer, enterprise, and industrial applications. It requires a supply voltage of 3.3 V and an input current of 6 mA. This AEC-Q100-qualified current sensor utilizes Allegro’s patented XtremeSense tunnel magnetoresistance (TMR) technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade Configurable PMICs | |
PMIC
from ROHM Semiconductor
|
| The BD96811Fxx-C Series from ROHM Semiconductor are Automotive-Qualified Power Management ICs that are ideal for advanced driver assistance systems (ADAS), instrument cluster panels, and in-vehicle infotainment (IVI) applications. They require an input voltage of 2.7-5.5 V. These power management ICs (PMICs) are designed to be configurable and support functional safety (as per ASIL-D standard) for MCUs, FPGAs, SoCs. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2025 Solar PV & Energy Storage World Expo | | 2025 Solar PV & Energy Storage World Expo | | The 2025 Solar PV & Energy Storage World Expo is a premier event showcasing the latest innovations, technologies, and solutions in solar photovoltaics and energy storage systems. The expo serves as a global platform for professionals, manufacturers, researchers, and policymakers to explore advancements in renewable energy and foster collaborations.Click here to learn more. | | | |
|
|
| IP65-Rated Electric Traction Motor | |
EV Traction Motor
from ABB
|
| The AMXE250L3GLX253586-BFA from ABB is an Electric Traction Motor that is designed for heavy electric vehicles. It delivers a continuous output power of 314 kW and a peak output power of 686 kW. This motor provides a torque of 1500 Nm and has a speed of 2000 rpm. It is customizable to meet application needs, including voltage requirements, mechanical interfaces, and duty cycles. This motor has low inertia for fast control. |
| |
Download Datasheet
Product Details | |
|
|
|
| Synchronous Step-Down DC-DC Converters | |
DC to DC Converter
from Torex Semiconductor
|
| The XC9705 Series from Torex Semiconductor are Synchronous Step-Down DC-DC Converters that convert an input voltage of 3-36 V to an output voltage of 2.8-15 V. They include a built-in high-side driver FET and a low-side driver FET. These converters have a switching frequency between 1.2MHz and 2.2MHz. They allow external adjustment of the soft start time by connecting a resistor and capacitor to the EN/SS (Enable/Soft Start) pin. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Automotive-Qualified SiC MOSFET | |
MOSFET
from Wolfspeed
|
| The E4M0013120K from Wolfspeed is an Automotive-Qualified SiC MOSFET. It has a drain-source breakdown voltage of over 1200 V, a gate threshold voltage of 2.5 V, and a drain-source on-resistance of less than 23 milli-ohms. This MOSFET is based on Wolfspeed's E4M generation SiC MOSFET technology and consists of a separate driver source pin for reducing switching losses and gate ringing. It meets automotive industry standards and provides improved insulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radial Supercapacitors for High-Power Density Applications | |
Supercapacitor
from Abracon
|
| The ADCR-E02R7S series from Abracon is a Radial Supercapacitor Series designed for applications that require high power density. They have a capacitance of 0.5- 10 F and a capacitance tolerance of ±20%. These capacitors have a voltage rating of 2.7 V and an equivalent series resistance (ESR) of less than 45-280 milli-ohms. They offer minimal discharge rates, retaining over 80% charge after 72 hours. These capacitors are available in a through-hole package. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by 2025 Solar PV & Energy Storage World Expo | | |
|
|
| MIL-PRF-Certified High Power Chip Resistors | |
Power Resistor
from Kyocera AVX
|
| The CR series from Kyocera AVX are High Power Chip Resistors that are designed for high-reliability applications. These MIL-PRF-55342 certified resistors have a resistance of 50 - 100 ohm and a resistance tolerance of up to 5%. They employ Kyocera's proprietary thin film technology and offer a temperature coefficient of less than 150 ppm/°C. These RoHS-compliant resistors are available in surface-mount packages and are ideal for high-power RF amplifiers. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75 V Isolated Buck DC-DC Converter | |
DC to DC Converter
from Mean Well
|
| The DKMW40G-15 from Mean Well is an Isolated Buck DC-DC Converter that converts an input voltage of 18-75 V to an output voltage of ±15V V. It delivers an output power of 40 W and has an efficiency of up to 91%. This converter operates efficiently in temperatures ranging from -40°C to +80°C with free air convection and requires no minimum load. It has remote ON/OFF control, adjustable output voltage (±10%), and protection mechanisms. |
| |
Download Datasheet
Product Details | |
|
