| Featured Products this Week |
|
|
| 100 µF Multilayer Ceramic Chip Capacitors | |
Power Capacitor
from TDK Corporation
|
| The C Series from TDK Corporation are Commercial Grade Multilayer Ceramic Chip Capacitors. They have a capacitance of up to 100 µF and a capacitance tolerance of about ±20%. These capacitors have voltage ratings of up to 75 V. They are designed with a monolithic structure to offer superior mechanical strength and reliability. These non-polar capacitors exhibit low self-heating and high resistance values. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade Full-Bridge Motor Driver IC | |
Motor Driver IC
from Infineon Technologies
|
| The BTM9021EP from Infineon Technologies is an Automotive-Grade Integrated Full-Bridge Motor Driver IC that is ideal for automotive unidirectional and bidirectional brushless DC motors, door modules, mirror modules, body control modules, resistive loads, and inductive load applications. It requires an input voltage of 4.5-40 V. This driver utilizes monolithic BCD technology with an exposed pad for improved thermal performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V N-Channel MOSFET | |
MOSFET
from Micro Commercial Components
|
| The MCACLF320N04Y-TP from Micro Commercial Components is an N-Channel MOSFET. It has a drain-source breakdown voltage of 40 V, a gate threshold voltage of 2.9 V, and a drain-source on-resistance of less than 0.62 milli-ohms. This RoHS-compliant MOSFET utilizes Split Gate Trench MOSFET technology and employs a high-density cell design to minimize power losses. It operates reliably at junction temperatures up to 175°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7 W Wirewound-Resistors | |
Power Resistor
from Bourns
|
| The PWRA247 from Bourns are Wirewound-Resistors. They have a resistance of 0.1 ohm-50 kilo-ohms and a resistance tolerance of up to 5%. These resistors have a power rating of 7 W. They have very low temperature coefficient of resistance (TCR) and excellent surge capabilities. These RoHS-compliant resistors are available in a surface-mount package that measures 30.60 x 12.0 x 13.00 mm and are ideal for telecommunications, switching power supplies. |
| |
Download Datasheet
Product Details | |
|
|
|
| 960 W Isolated AC-DC Converters | |
AC to DC Converter
from Recom Power
|
| The RACPR01-T960 Series from Recom Power are Isolated AC-DC Power Supplies that convert an AC input voltage of 320-575 V (3-phase) to a DC output voltage of 24/48 V. They also accept a DC input voltage of 450-850 V. These converters deliver an output power of 960 W and have an efficiency of up to 97%. They are designed specifically for demanding applications in harsh industrial automation field. These AC-DC converters provide an extended mains input surge immunity. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by APEC 2025 | | APEC 2025 | | APEC 2025, the Applied Power Electronics Conference, is set to bring together professionals, researchers, and industry leaders to showcase cutting-edge innovations, discuss advancements in power electronics, and explore practical solutions for real-world applications. The conference features technical sessions, hands-on workshops, industry exhibits, and networking opportunities, making it an essential gathering for anyone involved in power electronics and energy systems.Click here to learn more. | | | |
|
|
| Automotive-Grade High Side Protection Switch IC | |
Power Switch IC
from ROHM Semiconductor
|
| The BV1LB050FPJ-C from ROHM Semiconductor is an Automotive-Grade Single-Channel Low Side Switch IC that is designed for 12 V automotive applications. It requires an input voltage of 3-5.5 V and provides an output current of 15 A. This power switch includes a monolithic power management IC with a control unit (CMOS) and a power MOSFET. It has been designed to offer protection against surges in voltage, current, and thermal effects. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 kW LTO Battery Pack | |
EV Battery
from ABB
|
| The Max 8C-800 from ABB is a Lithium Titanate Oxide (LTO) Battery Pack that has been designed for transportation applications with demanding requirements such as rail, electrical bus, and off-road vehicles. It has a voltage rating of 662 V and an energy capacity of up to 30.5 kWh. This battery pack provides a peak charging/discharging power of up to 300/260 kW, a charging voltage of 778 V and a discharging voltage of less than 432 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67-Rated Low-Power DC-AC Inverter | |
DC to AC Inverter
from Turntide Technologies
|
| The Turntide Gen 4 HVLP10 from Turntide Technologies is a DC-AC Inverter that requires a DC input voltage of 700 V. It provides an AC output current of 19 A (continuous) and 24 A (peak). This inverter has been designed primarily for the control of pumps and fans on hybrid and electric buses, agricultural implements, tractors, and other high-voltage vehicles while consuming low power. It supports a sensorless VF induction machine algorithm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1600 W Digital Buck DC-DC Converters | |
DC to DC Converter
from Flex Power Modules
|
| The BMR351 from Flex Power Modules are Non-Isolated Digital Buck DC-DC Converters that convert an input voltage of 40-60 V to an output voltage of 12.20 V. They deliver an output power of 1600 W and have an efficiency of 97.8%. These converters have advanced functionalities such as an event data recorder (black box), parallel operation with droop load sharing, and PMBus configuration for seamless integration and monitoring. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q200 Grade Wirewound Chip Inductor | |
Power Inductor
from Murata
|
| The LQW18FT1R20HL from Murata is an Automotive-Qualified Wirewound Chip Inductor that is ideal for automotive powertrain/safety equipment and power-over-coaxial (PoC) applications. It has an inductance of 1.2 µH and an inductance tolerance of ±10%. This AEC-Q200-qualified inductor has a current rating of 560 A and a dynamic contact resistance (DCR) of less than 370 milli-ohms. It has a Ferrite core material with magnetic shielding. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 1200 Nm EV Transmission Motor | |
EV Traction Motor
from Eaton
|
| The Medium duty 4-speed from Eaton is a Medium Duty EV Transmission Motor. It provides a torque of 1200 Nm and has a speed of 5000 rpm. This electric motor offers significantly greater efficiency at high speeds and increased torque at launch and low speeds. It features a lightweight countershaft gearbox and electric gearshift actuation that allows for smaller electric motors. This electric motor is controlled by a Transmission Control Unit. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 V Energy Harvesting PMIC | |
PMIC
from e-peas
|
| The 10AEM10920A0000 from e-peas is an Energy Harvesting PMIC. It has an input voltage range from 50 mV to 5 V. This PMIC extracts DC power from a harvesting source to store energy in a rechargeable battery and powers an application circuit. It extends the battery lifetime and eliminates the need for a primary energy storage element. This Energy Manager IC can harvest the maximum available power from a source with its Maximum Power Point Tracking. |
| |
Download Datasheet
Product Details | |
|
