| Featured Products this Week |
|
|
| 5 A eFuse with Over-Voltage Protection | |
eFuse IC
from Littelfuse
|
| The LS12052BD33 from Littelfuse is an eFuse IC that is ideal for HDD and SSD drives, adapter-powered devices, notebook PC, PCI, PCIe cards and industrial applications. It requires an input voltage of 2.7-18 V and provides an output current of less than 5 A. This eFuse has a clamping voltage of 14.4 V and has extremely low drain-source resistance. It uses a few external components and provides multiple protection modes. |
| |
Download Datasheet |
Product Details | |
|
|
|
| -100 V P-Channel Power MOSFET | |
MOSFET
from Micro Commercial Components
|
| The MCU055P10-TP from Micro Commercial Components is a P-Channel Power MOSFET. It has a drain-source breakdown voltage of -100 V, a gate threshold voltage of -2 V, and a drain-source on-resistance of less than 64 milli-ohms. This MOSFET has a continuous drain current of -28 A, a pulsed drain current of -112 A and a power dissipation of 89 W. This RoHS-compliant MOSFET utilizes Trench LV MOSFET technology. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 600 Nm Electric Transaxle | |
Electric Axle
from e-comer
|
| The TX1 MAX SERIE - WHEEL HUBS VERSION from e-comer is an Electric Transaxle. It provides a torque of up to 600 Nm and has an input speed of up to 7000 rpm. This IP-67-rated electric axle (e-axle) has a full floating axle in its gearbox with double-row angular contact bearings that provide an efficiency of 95%. It supports both AC induction motor and permanent magnet AC Motor with internal permanent magnet (PMAC IPM). |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2 A Variable Buck DC-DC Converter | |
DC to DC Converter
from Wurth Elektronik
|
| The 171023802 from Wurth Elektronik is a Variable Buck DC-DC Converter that converts an input voltage of 3.5 - 38 V to an output voltage of 0.85 - 13 V. It delivers an output current of less than 2 A and has an efficiency of up to 94%. This converter integrates a switching regulator with built-in MOSFETs, a controller, compensation components, and a shielded inductor. It supports a constant, selectable PWM switching frequency over its entire operation. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
| 15 W Load Switch IC with Current Limit | |
Power Switch IC
from Kinetic Technologies
|
| The KTS1665ECAC-TA from Kinetic Technologies is a Load Switch IC that is ideal for smartphones, tablets, gaming consoles, notebooks, ultra-books, desktop PCs, USB source ports, set-top boxes, and networking applications. It requires an input voltage of 2.5-5.5 V. This switch has been optimized to protect systems with USB type-C ports that deliver an output power of 15 W and enable them to withstand an input voltage of up to 29 V on the VBUS pin. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 6 kV Automotive-Grade Isolated Gate Driver | |
Gate Driver
from Skyworks Solutions
|
| The Si82Bx Series from Skyworks Solutions are Automotive-Qualified, Single-Channel Isolated Gate Drivers that are suitable for driving power silicon MOSFETs, IGBTs, SiC FETs, and GaN FETs used in various switched power and motor control applications. They require an input voltage of 3-20 V. These drivers are built using automotive-specific flows at all steps in the manufacturing process to ensure robustness and low defectiveness in automotive applications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Automotive-Grade General Purpose Chip Resistor | |
Power Resistor
from ROHM Semiconductor
|
| The MCR03SEQPFL from ROHM Semiconductor is an Automotive-Grade General Purpose Chip Resistor that is designed for high-power applications. It has a resistance of 1-9.1 ohms and a resistance tolerance of ±1%. This AEC-Q 200-qualified resistor has a power rating (CW) of 0.125 W. It provides the same rated power as one size larger product, by changing the design of the resistive element. This resistor has been tested and certified to meet ISO9001 / IATF16949 standards. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2.3 A Automotive-Qualified ESD Protection Diode | |
Power Diode
from Nexperia
|
| The PESD1ETH10L-Q from Nexperia is an Automotive-Qualified ESD Protection Diode designed specifically for automotive Ethernet networks. It has a reverse voltage of less than 75 V and a rated peak pulse current of 2.3 A. This AEC-Q101-qualified diode safeguards sensitive in-vehicle network lines against damaging voltage spikes and transients. It meets the stringent requirements of the OPEN Alliance IEEE 10BASE-T1s, 100BASE-T1, and 1000BASE-T1 standards. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by European Automotive E/E Systems Summit 2025 | | European Automotive E/E Systems Summit 2025 | | European Automotive E/E Systems Summit 2025 will provide insights into the current advancements in E/E architecture, shaping the future of AI integration and the overall transformation of the automotive sector. Making E/E architectures flexible enough to support future innovations is critical. Opportunities to leverage AI to create a safe, scalable and intelligent mobility ecosystem, opening up new possibilities for smart driving, predictive maintenance and enhanced user experience.Click here to learn more. | | | |
|
|
| 330 W Military-Grade AC-DC Converter | |
AC to DC Converter
from SynQor
|
| The MPFIC-115-3PD-28R-FG from SynQor is a Military-Grade AC-DC Converter that steps down an AC input voltage of 575 V to a DC output voltage of 28 V. It delivers an output power of up to 330 W and has an efficiency of up to 92.5%. This converter ensures reinforced isolation at a 100°C baseplate temperature while maintaining high power factor correction (>0.99). This MIL-STD-704/MIL-STD-46/MIL-STD-810G converter offers superior load transient rejection. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 7-to-16-Cell Battery Monitoring IC | |
Battery Management IC
from Monolithic Power Systems
|
| The MP2787DFP-0000 from Monolithic Power Systems is a Multi-Cell Battery Monitoring IC that is ideal for power and gardening tools, e-bikes, e-scooters, battery backups, uninterruptible power supply (UPS), and energy storage applications. It requires an input voltage of 18-75.2 V and an input current of 23 µA. This battery management IC (BMIC) is designed for analog front-end (AFE) monitoring and monitors battery packs. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 30 W IEEE-Compliant POE Injector | |
Power Over Ethernet IC
from Microchip Technology
|
| The PD-9001GR/SP/AC-UK from Microchip Technology is an IEEE 802.3at-Compliant Single-Port Power-over-Ethernet Injector that is suitable for powering current and emerging high-power applications. It requires an input voltage of 100-240 V and delivers an output power of 30 W with a data rate of 10/100/1000 Mbps (10/100/1000Base-T). This power solution is also backwards-compatible with IEEE 802.3af-compliant devices and other pre-standard devices. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Automotive-Grade Shielded Power Inductors | |
Power Inductor
from Bourns
|
| The SRR6838A Series from Bourns are Shielded Power Inductors. These AEC-Q200-compliant inductors have an inductance of 1-100 µH and have an inductance tolerance of ±20/±30%. They have a current rating of up to 4.5 A, a heating current of up to 6.8 A, and a dynamic contact resistance (DCR) of up to 345 milli-ohms. These RoHS-compliant inductors are available in a surface-mount package that measures 6.8 x 6.8 x 3.8 mm. |
| |
Download Datasheet |
Product Details | |
|
|
| Sponsored by European Automotive E/E Systems Summit 2025 | | |
|
|
| 100 V Voltage Surge Stoppers | |
Surge Suppression IC
from Analog Devices
|
| The LT4363 from Analog Devices are High Voltage Surge Stoppers that are designed to protect electronic loads from voltage transients. They require an input voltage of 4-80 V. These surge suppressors have an adjustable output clamp voltage and can withstand surges over 100 V with a VCC clamp. They offer reverse input protection up to –60 V and have a quiescent current of less than 7µA during shutdown. These surge protectors control the gate voltage of an external N-channel MOSFET. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 500 A On-Board DC Fast Charger | |
On-Board Charger
from Suncar
|
| The INTERFLOW500C from Suncar is an On-Board DC Fast Charger designed to facilitate fast charging of electric vehicles and machinery. It requires a supply voltage of 12-24 V. This on-board charger (OBC) provides a DC output voltage of 800-1000 V and a DC output current of 350 - 500 A. It can be used as a standalone DC charging interface or in combination with an OBC. This OBC supports CAN communication with the vehicle control unit. |
| |
Download Datasheet |
Product Details | |
|
