| Featured Products this Week |
|
|
| 230 kW Electric Drive Unit | |
EV Traction Motor
from DEEPDRIVE
|
| The CSD 450 EDU from DEEPDRIVE is an Electric Drive Unit. This traction motor delivers a peak output power of 230 kW. It provides a torque of up to 3800 Nm and has a speed of less than 2000 rpm. This motor can handle DC voltages of less than 850 V and can withstand DC currents of up to 400 A. It features a novel dual-rotor, radial-flux electric machine combined with an integrated silicon carbide (SiC) inverter. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Channel Isolated Gate Drivers | |
Gate Driver
from Skyworks Solutions
|
| The Si82Cx Series from Skyworks Solutions are Single Channel Isolated Gate Drivers designed for high-power applications. They require an input voltage from 3-20 V and gate supply voltage of 5-30 V. These gate drivers utilize Skyworks' proprietary silicon isolation technology and can handle up to 6 kV RMS for one minute isolation voltage. They include CMOS inputs with a selectable deglitch filter for robust noise margin. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 V Rad-Hard eGaN Transistor | |
GaN Power Transistor
from EPC Space
|
| The JANSH2N7674UFUBC from EPC Space is a Radiation Hardened Enhancement Mode GaN Transistor that has been designed for critical applications in space and other high-reliability environments. This transistor has a drain-source voltage of 60 V, a gate threshold voltage of up to 2.5 V, and a drain-source on-resistance of up to 580 milli-ohms. It has a continuous drain current of 1 A and a pulsed drain current of 4 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade Functional Safety PMIC | |
PMIC
from Infineon Technologies
|
| The TLF35585QUS02 from Infineon Technologies is an Automotive-Grade Functional Safety Power Management IC that has been designed for safety-relevant applications. It requires an input voltage of 3-40 V. This AEC-Q100 Grade 0-qualified power management IC (PMIC) includes a buck-boost pre-regulator, low-drop post regulators, a precise voltage reference, two voltage trackers, and protection circuitries. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Interview | | Interview with Satoshi Hanazawa from ABLIC | | everything PE recently interviewed Satoshi Hanazawa, Senior Vice President, Product Development at ABLIC. ABLIC manufactures analog semiconductors, offering a diverse range of products that include power management integrated circuits (ICs), memory solutions, sensors, amplifiers, timer ICs, automotive ICs, and healthcare ICs. Click here to learn more. | | | |
|
|
| 110 W AC-DC Power Supplies | |
AC to DC Converter
from XP Power
|
| The CCR200 Series from XP Power are Isolated AC-DC Power Supplies that step down an AC input voltage of 85-264 V (single-phase) to a DC output voltage of 12-54 V. They deliver an output power of up to 110 W and have an efficiency of less than 94%. These AC-DC converters are designed to operate under convection-cooled, conduction-cooled, and fan-cooled conditions. They offer high efficiency and power density in a low-profile design. |
| |
Download Datasheet
Product Details | |
|
|
|
| 37.5 A Three-Phase On-Board Battery Charger | |
On-Board Charger
from Bel Fuse
|
| The BCN25-700-8 from Bel Fuse is a Three-Phase On-Board Battery Charger that converts 3-phase AC voltage to DC voltage. It requires an input voltage of 460-575 V and an input current of 40 A. This liquid-cooled on-board charger (OBC) provides a DC output voltage of 250-800 V and a DC output current of 37.5 A. It delivers an output power of 25 kW and has an efficiency of up to 93%. This UL2202-approved charger benefits from J1939-compliant CAN control and monitoring. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 Cells Li-ion Battery Cell Controllers | |
Battery Management IC
from NXP Semiconductors
|
| The MBMI7018SA1AE from NXP Semiconductors is an 18-cell battery-cell controller IC that is designed for industrial applications such as energy storage systems (ESS) and uninterruptible power supply (UPS) systems. It requires an input voltage of 9-90 V. This controller incorporates a primary digital control, a secondary digital control, a secondary analog control, digital circuits (MUX and DEMUX), A/D converters, regulators, power supply monitoring, and serial interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-MPPT String Inverter for 1500 V DC System | |
DC to AC Inverter
from Sungrow Corporation
|
| The SG250HX-20 from Sungrow Corporation is a Multi-MPPT String Inverter that converts a DC input voltage of 500-1500 V to an AC output voltage of 640-920 V. It delivers an output power of 250 kW (across 2 output ports) and has an efficiency of up to 99.02%. This photovoltaic (PV) inverter uses up to 6 MPPTs and has a capacity of 65 A per MPPT, adapting to different PV modules. It features smart-cooled and dedusted fan with IP68 protection. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by APEC 2025 | | APEC 2025 | | APEC 2025, the Applied Power Electronics Conference, is set to bring together professionals, researchers, and industry leaders to showcase cutting-edge innovations, discuss advancements in power electronics, and explore practical solutions for real-world applications. The conference features technical sessions, hands-on workshops, industry exhibits, and networking opportunities, making it an essential gathering for anyone involved in power electronics and energy systems.Click here to learn more. | | | |
|
|
| 5.5 V Coin Supercapacitor | |
Supercapacitor
from Abracon
|
| The ADCH-S05R5SA155R from Abracon is a Coin Supercapacitor. It has a capacitance of 1.5 F and a capacitance tolerance of 0/+30%. It has a voltage rating of 5.5 V and an equivalent series resistance (ESR) of less than 10 ohms. It has a horizontal configuration and offers excellent power density. This RoHS-compliant supercapacitor provides outstanding cycle life with a minimal discharge rate. It is available in a through-hole package that measures 18.7 x 5.3 x 6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Insulated Gate Bipolar Transistor | |
IGBT
from Alpha & Omega Semiconductor
|
| The AOT10B65MQ2 from Alpha & Omega Semiconductor is an Insulated Gate Bipolar Transistor. It has a collector-emitter breakdown voltage of over 650 V, a gate-emitter threshold voltage of 5.1 V, and a saturated collector-emitter voltage of 1.6 V. This Insulated Gate Bipolar Transistor (IGBT) has a continuous collector current of 10-20 A and a peak collector current of less than 30 A. It has a gate-emitter leakage current of ±100 nA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 kW Non-Isolated DC-DC Converter | |
DC to DC Converter
from OmniOn Power
|
| The QODE167A0B from OmniOn Power is a Non-Isolated DC-DC Converter that is designed to support 12 VDC intermediate bus applications. It converts an input voltage of 40-60 V to an output voltage of 11.8-12.4 V. This DC-DC converter provides an output current of up to 167 A, a continuous output power of 2000 W and has an efficiency of over 98%. It has a constant switching frequency and offers low output ripple and noise. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V SiC Full-Bridge MOSFET | |
MOSFET
from SemiQ
|
| The GCMX080A120B2H2P from SemiQ is a Silicon Carbide (SiC) Full-Bridge MOSFET. It has a drain-source breakdown voltage of over 40 V, a gate threshold voltage of up to 1200 V, and a drain-source on-resistance of 77 milli-ohms. This module integrates high-speed SiC MOSFETs with reliable body diodes and has minimal switching losses. It is tested at voltages exceeding 1350 V and can be mounted directly to a heat sink. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 60 kW Distributed Electric Axle System | |
Electric Axle
from Brogen EV Solution
|
| The 100041C from Brogen EV Solution is a Distributed Electric Axle System that is ideal for public transport (8M-9M bus) applications. It delivers an output power of 60 kW (per output) and a peak output power of 120 kW (per output). This e-axle provides a torque of 145 Nm, a peak torque of 400 Nm, and has a speed of up to 9500 rpm. It consists of an electric motor, a gear, and an integrated system. This axle’s system supports an air-based disc brake. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.55µH Automotive-Qualified Power Inductor | |
Power Inductor
from Murata
|
| The LQW18FTR55K0HL from Murata is an Automotive-Qualified Wirewound Chip Inductor that is ideal for automotive powertrain/safety equipment, automotive infotainment/comfort equipment and medical equipment applications. It has an inductance of 0.55 µH and an inductance tolerance of ±10%. This AEC-Q200-qualified inductor has a current rating of 800 mA and a dynamic contact resistance (DCR) of less than 0.19 ohms. |
| |
Download Datasheet
Product Details | |
|
