| Featured Products this Week |
|
|
| 140 W Convection Cooled AC-DC Power Supplies | |
AC to DC Converter
from XP Power
|
| The PGD140 Series from XP Power are Convection Cooled External AC-DC Power Supplies designed to deliver reliable and efficient power for medical, home healthcare, medical diagnostics, and instrumentation applications. These power supplies accept a universal single-phase AC input of 80–264 VAC and provide auto-selected DC output voltages from 5-28 V. These power supplies measure 90.5 x 58.5 x 33.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Universal High-Voltage PWM Led Driver | |
LED Driver IC
from Diodes Incorporated
|
| The AL9910A-5S-13 from Diodes Incorporated is a Universal High-Voltage PWM LED Driver that provides an efficient solution for offline high-brightness LED lamps from rectified line voltages. It requires an input voltage of 85-277 V. This LED driver drives external MOSFETs at switching frequencies up to 300 kHz, with the switching frequency determined by a single resistor. This LED driver can withstand input voltages up to 500 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2000 V Reverse Recovery Power Diode | |
Power Diode
from WeEN Semiconductors
|
| The WND90P20WQ from WeEN Semiconductors is a Standard Reverse Recovery Power Diode that is ideal for input rectifier, bypass diode, and off-board EV/HEV battery chargers. It has a forward voltage of 1.15 V and a forward current of 90 A. This power diode has a repetitive peak reverse voltage of up to 2000 V. This power diode is available in a through-hole package that measures 41.32 x 15.75 x 5.2 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 V P-Channel MOSFET | |
MOSFET
from Micro Commercial Components
|
| The MCG360P15-TP from Micro Commercial Components is a P-Channel MOSFET. It has a drain-source voltage of -150 V, a gate threshold voltage of -2.7 V, and a drain-source on-resistance of 290 milli-ohms. This MOSFET has a continuous drain current of -10 A, a pulsed drain current of -40 A, and a power dissipation of less than 78 W. It is available in a surface-mount package that measures 3.30 x 3.30 x 0.85 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 13 W Single PoE Controller | |
Power Over Ethernet IC
from Analog Devices
|
| The LTC4274C from Analog Devices is a Single PoE Controller designed for fully automatic systems powering Type 1 PDs up to 13W. This IEEE 802.3at Type 1 compliant PoE controller features low power dissipation through 0.25Ω sense resistors. It has a highly reliable 4-point PD detection, which includes 2-point forced voltage, 2-point forced current, and high capacitance legacy device detection. It is available in a surface-mount package that measures 5 x 7 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual Channel Operational Amplifier | |
Power Operational Amplifier
from Microchip Technology
|
| The MCP6022-E/STVAO from Microchip Technology is a Dual Channel Operational Amplifier. It requires a supply voltage of 2.5-5.5 V, an input offset current of 1 pA, and an input bias current of 1 pA. This op-amp provides an output current of 22 mA, a slew rate of 7 V/µs, and a common-mode rejection ratio (CMRR) of up to 90 dB. It features rail-to-rail input and output capability with high-performance characteristics. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Low-Side Switch with Smart Overload Protection | |
Power Switch IC
from STMicroelectronics
|
| The IPS1050LQ from STMicroelectronics is a Single-Channel Low-Side Solid-State Switch IC. It requires a supply voltage of 5.8-10 V and an input current of 1-1.4 mA. This IC can drive resistive, capacitive, or inductive loads and integrates smart overload protection with configurable inrush and steady-state current limitation levels. It supports inrush currents up to 25 A and a very low on-state resistance of less than 50 milli-ohms. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Europe Battery Energy Storage Summit 2026 | | Europe Battery Energy Storage Summit 2026 | | The Europe Battery Energy Storage Summit 2026 will bring together industry experts, innovators, and policymakers to accelerate the development of advanced energy storage solutions across Europe. The event will focus on battery technologies, grid integration, renewable energy applications, sustainability strategies, and the evolving policy and investment landscape shaping the future of energy storage. Click here to learn more. | | | |
|
|
| 26 V Automotive-Grade Asymmetrical TVS Diode | |
Power Diode
from Littelfuse
|
| The TPSMB2616CA from Littelfuse is an Automotive-Grade Asymmetric TVS Diode designed for reverse battery protection. It has a reverse standoff voltage of 26 V on the high side and 16 V on the low side. This TVS diode has a breakdown voltage of 31.9 V (K to A) and 19.7 V (A to K), delivering strong clamping performance with maximum clamping voltages of 39.5 V and 26.0 V, respectively. It is available in a surface-mount package that measures 4.57 x 3.94 x 2.44 mm |
| |
Download Datasheet
Product Details | |
|
|
|
| 8.23 µH Wireless Charging Receiver Coil | |
Wireless Charging Coil
from TDK Corporation
|
| The WR303050-12F5-ID from TDK Corporation is a Wireless Charging Receiver Coil that supports output power levels of up to 1–3 W. This RoHS/REACH-compliant receiver coil has an inductance of 8.23 µH and a DC resistance of 0.28 ohms. It is available in a through-hole package that measures 30 x 29.6 mm and is ideal for smartphones, cellular phones, handheld mobile terminals, DSCs, and wearable products. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 V Dual-Channel Half-Bridge Brush Motor Driver | |
Motor Driver IC
from ROHM Semiconductor
|
| The BD60210FV-E2 from ROHM Semiconductor is a Dual-Channel Half-Bridge Motor Driver IC for DC brush motors, bipolar stepper motor or solenoid loads. It requires an input voltage of 8-18 V and has a rated output current of 4 A. This motor driver offers high efficiency through direct PWM control. It has an output on-resistance of 0.95 ohms. It is available in a surface-mount package that measures 5.00 x 6.40 x 1.35 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad-Channel Combination Regulators | |
PMIC
from Nisshinbo Micro Devices
|
| The NP8700 Series from Nisshinbo Micro Devices are Quad-Channel Combination Regulators. They require input voltages of 2.4–5.5 V and deliver output voltages of 0.8–5.5 V. These AEC-Q100-qualified PMICs include one wide input range buck converter, two secondary synchronous buck converters, and one LDO, using a BCD process. They are available in surface-mount packages that measure 3.4 × 2.6 × 0.75 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flyback Transformer for Isolated Power Conversion | |
Power Transformer
from iNRCORE
|
| The PL3290NL from iNRCORE is a Flyback Transformer designed for high-performance isolated power-conversion applications. It features a turns ratio of 1:12 and delivers an inductance of 21.14 µH, with a minimum inductance of 18 µH at 1.5 A. Designed for stable magnetic performance, it offers a maximum leakage inductance of 750 nH and a low DCR of 0.16 Ω, ensuring efficient energy transfer and reduced power loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W Isolated AC-DC Converter | |
AC to DC Converter
from P-DUKE Power
|
| The TAD30US151B-P from P-DUKE Power is an Isolated AC-DC Converter that steps down an AC input voltage of 85-264 V to a DC output voltage of 15 V. This AC-DC converter also accepts a DC input voltage of 120-370 V. It delivers a DC output power up to 40 W and has an efficiency of 86%. It offers a low leakage current that ensures high reliability. It is available in a chassis-mount package that measures 84.8 x 34.6 x 19.6 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Silicon Carbide MOSFET | |
MOSFET
from Wolfspeed
|
| The EDB005M12TM4 from Wolfspeed is a Silicon Carbide MOSFET Module. It has a drain-source voltage of 1200 V, a gate threshold voltage of 3.6 V, and a drain-source on-resistance of over 11.2 milli-ohms. This SiC MOSFET has a continuous drain current of 320 A and has a Comparative Tracking Index (CTI) greater than 600 V. This MOSFET uses high-performance Si3N4 insulator and ultra-reliable interconnect technologies. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Europe Battery Energy Storage Summit 2026 | | |
|
|
| 650 V Bidirectional GaN Power Switch | |
Power Switch IC
from Navitas Semiconductor
|
| The NV6426 from Navitas Semiconductor is a Bidirectional GaN Power Switch that is capable of blocking voltage in both directions. It requires an input voltage of up to 6.5 V (for gate drive). This power switch has a continuous source-to-source voltage of 650 V and a transient source-to-source voltage of 800 V. It has a gate threshold voltage of up to 2.8 V, a gate-source leakage current of 72 µA, and a total gate charge of 5.29 nC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W Solar Panel | |
Solar Panels
from 3D Energy
|
| The ALPHA 500W from 3D Energy is a Solar Panel that consists of 120 cells. It has a maximum nominal power of 500 W and a module efficiency of 23.10 %. This solar panel has an open circuit voltage of 43.37 V and a maximum power voltage of 36.04 V. It has a short circuit current of 14.63 A and a maximum current of 13.89 A. This solar panel has a reverse current load capacity of 25 A and a nominal front load of 5400 Pa. |
| |
Download Datasheet
Product Details | |
|
|
|
| Battery Cell Controller IC for Automotive and Industrial Applications | |
Battery Management IC
from NXP Semiconductors
|
| The MBMA7418TA1AE from NXP Semiconductors is a Battery Cell Controller IC. It integrates a DFT and an ADC per voltage measurement channel, enabling high synchronization capability essential for Electrochemical Impedance Spectroscopy (EIS). This battery management IC (BMIC) integrates a DC-to-DC converter and operates with an ultra-low current consumption of 4 mA. It features passive cell balancing. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 A Intelligent Power Module | |
IGBT
from Fuji Electric
|
| The 6MBP20XSK065-50 from Fuji Electric is an IPM (Intelligent Power Module) that is ideal for AC 100 - 240 V three-phase inverter drive for small power and AC motor drive applications (such as compressor motor drive for air conditioners, compressor motor drive for heat pump applications, fan motor drive, ventilator motor drive). It has a collector-emitter voltage of up to 650 V, an input threshold voltage of 2.6 V. It is available in a package that measures 43 x 26 mm. |
| |
Download Datasheet
Product Details | |
|
