| Featured Products this Week |
|
|
| 8:1 Input Isolated DC-DC Converters | |
DC to DC Converter
from Cincon Electronics
|
| The EC3SAW8 Series from Cincon Electronics are 8:1 Input Isolated DC-DC Converters that convert an input voltage of 9-75 VDC to an output voltage of 3.3-15 VDC. These converters offer efficiencies of up to 86% and feature low no-load power consumption for improved energy efficiency. They support a full load input current of up to 75 mA and provide an output current of up to 700 mA. These converters provide an input-to-output isolation of 3000 VDC. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 W AC-DC Converters | |
AC to DC Converter
from Bel Fuse
|
| The HDP65 Series from Bel Fuse are AC-DC Converters that convert an AC input of 90-264 V to a DC output of 5-56 V. They provide an output current of 1.16-5.42 A, an output power of 65 W and have a ripple of 1-5%. These GaN-based converters have an efficiency of up to 92% and offer a high-power density of 17.20 W/in3. These AC-DC Converters are available in open-frame packages that measure 25.4 x 32 x 76.2 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 V Self-Powered Isolated SiC Driver Chipset | |
Gate Driver
from Allegro MicroSystems
|
| The AHV85043K20ESTR from Allegro MicroSystems is an Automotive-Grade Self-Powered Isolated SiC Driver Chipset. This gate driver requires an input voltage of 10.5-13.2 V. It transmits both PWM signal and gate bias power through the external transformer, eliminating the need for any external auxiliary bias supply or high-side bootstrap. It is available in a surface-mount package that measures 4.0 x 4.0 x 0.75 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 W MPPT Hybrid Wind Solar Charge Controller | |
Wind Turbine Charge Controllers
from DNEA
|
| The 1000W 48V from DNEA is a Maximum Power Point Tracking (MPPT) Hybrid Wind Solar Charge Controller designed for energy management in small-scale wind power systems. It supports wind turbines rated up to 1000 W and 48 V battery banks, continuously tracking the turbine’s optimal operating point to maximize energy capture under variable wind conditions. This controller is available in an IP41-rated module. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 A Automotive-Grade Schottky Barrier Rectifier | |
Power Diode
from Micro Commercial Components
|
| The MBRB6045CTQ from Micro Commercial Components is an Automotive-Grade Schottky Barrier Rectifier. It has a forward voltage of 0.75 V and a rectified forward current of less than 60 A. This AEC-Q101-qualified power diode has an rms reverse voltage of up to 31.5 V, a peak repetitive reverse voltage of less than 45 V. This RoHS-compliant diode is available in a surface-mount package that measures 15.75 x 10.60 x 4.80 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 V High-Frequency Gate Driver IC | |
Gate Driver
from Diodes Incorporated
|
| The DGD28225FN-7 from Diodes Incorporated is a High-Frequency Gate Driver IC that is ideal for multi-phase DC-DC converters with digital control, synchronous rectification for isolated point of load, and wireless charging transmitter applications. This gate driver is capable of driving two N-channel MOSFETs in a half-bridge configuration. It consists of an internal bootstrap diode, and the floating high-side driver is rated up to 30 V. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Smart Chassis Forum 2026 | | European Smart Chassis Forum 2026 | | European Smart Chassis Forum 2026
The European Smart Chassis Forum 2026 will bring together automotive engineers, researchers, and industry leaders to explore the latest innovations in intelligent chassis systems. The event will focus on advancements in lightweight design, electrification, autonomous driving integration, and digital control technologies, fostering collaboration to shape the next generation of safe, efficient, and connected vehicle platforms. Click here to learn more. | | | |
|
|
| 800 V Triac for AC Switching Applications | |
Triac
from STMicroelectronics
|
| The Z0107NA 1AA2 from STMicroelectronics is a Triac designed for general-purpose AC switching applications. It has a breakover voltage of 800 V and a breakover current of up to 8.5 A. This thyristor has a gate trigger voltage of 1.3 V and a gate trigger current of over 25 mA. It is a sensitive-gate device rated for an RMS on-state current of 1 A. This triac is available in a through-hole package that measures 17.10 x 4.70 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Digital High-Voltage AC-DC Power Supplies | |
AC to DC Converter
from XP Power
|
| The WBQ Series from XP Power is a series of Digital High-Voltage AC-DC Power Supplies that convert an AC input voltage of 187-440 V to a DC output voltage of 0-100 kV. They require an input current of 46 A. These power supplies produce an output power of up to 10 kW. They offer output voltage and current programming (0–110%) via CAN and EtherCAN protocols. They are available in a compact rack-mount package that measures 132.1 x 431.8 x 609.6 mm |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 V Air-Cooled DC-AC Inverter | |
DC to AC Inverter
from Turntide Technologies
|
| The Size 6 X- 80V from Turntide Technologies is an Air-Cooled DC-AC Inverter. This inverter has a nominal voltage of 80 V and provides an output motor power of up to 63 W and an output current of over 550 A. It uses maximum torque per ampere algorithms for IPM/SPM motors, along with field weakening and vehicle control features like hill-hold and anti-jerk. It is available in a chassis-mount package that measures 197 x 147 x 59.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 A Standard Reverse Recovery Power Diode | |
Power Diode
from WeEN Semiconductors
|
| The WND60P20WQ from WeEN Semiconductors is a Standard Reverse Recovery Power Diode that is ideal for input rectifiers and bypass diodes. It has a forward voltage of 1.12 V and a forward current of 60 A. This power diode has a repetitive peak reverse voltage of up to 2000 V and has a reverse current of up to 1.5 mA. This power diode is available in a through-hole package that measures 41.32 x 15.75 x 5.2 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| PMIC with Ultra-Efficient Boost Regulator | |
PMIC
from Nordic Semiconductor
|
| The nPM2100 from Nordic Semiconductor is a Power Management IC that has been designed to provide highly efficient power regulation for any primary-cell application. It features a boost converter that provides output voltages of 1.8-3.3 V, from input voltages as low as 0.7-3.4 V. This PMIC includes a 50 mA LDO/load switch supplied by the boost regulator. It is available in a surface-mount package that measures 1.9 x 1.9 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 nF Chip Multilayer Ceramic Power Capacitor | |
Power Capacitor
from Murata
|
| The GRM32E5C3B153FWAAL from Murata is a Multilayer Ceramic Power Capacitor. It has a capacitance of 15 nF and a capacitance tolerance of ±1%. This ceramic capacitor has a voltage rating of 1250 Vdc. It operates over a temperature range of up to +125°C. This RoHS-compliant chip multilayer capacitor is available in a surface-mount package that measures 3.2 x 2.5 x 2.5 mm and is ideal for consumer electronics and industrial equipment. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Smart Chassis Forum 2026 | | |
|
|
| 100 V Enhancement-Mode GaN Power Transistor | |
GaN Power Transistor
from Efficient Power Conversion
|
| The EPC2044 from Efficient Power Conversion is an Enhancement-Mode GaN Power Transistor. This transistor has a drain-source voltage of 100 V, a gate threshold voltage of 1.4 V, and a drain-source on-resistance of less than 10.5 milli-ohms. It has a continuous drain current of 9.4 A and a pulsed drain current of 89 A. This transistor provides very low RDS(on) due to the high electron mobility and low temperature coefficient of gallium nitride. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Grade Planar Transformers | |
Power Transformer
from Vishay
|
| The SGTPL-28 series from Vishay is a series of Space-Grade Planar Transformers. These transformers require primary input voltages of 18-36 V and provide secondary output voltages of 5-12 V. They have an inductance of 38–65 μH and a turns ratio of 0.6/1.5:1. These power transformers offer high power densities compared to traditional planar designs and can be easily customized to meet specific design requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Silicon Carbide Power Module | |
MOSFET
from SemiQ
|
| The GCMX007C120S1-E1 from SemiQ is a Silicon Carbide Power Module. It has a drain-source breakdown voltage of over 1200 V, a gate threshold voltage of 4 V, and a drain-source on-resistance of less than 13.5 milli-ohms. This MOSFET has a continuous drain current of 192 A and delivers an output power of 536 W. It offers high switching speed, low switching losses, and low junction to case thermal resistance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 KVA Pure Sinewave Micro-Inverters | |
DC to AC Inverter
from Mean Well
|
| The PV-SMI-2000 Series from Mean Well are Pure Sinewave Micro-Inverters that convert a DC input voltage of 22-55 V to an AC output voltage of 208-240 V. They deliver an output power of 2 kVA and have an efficiency of up to 97.30%. These inverters consist of 4 input channels that can deliver an output power of up to 750 W to one solar module and are compatible with most of the PV module models on the market. |
| |
Download Datasheet
Product Details | |
|
|
|
| 590 W Solar Panel | |
Solar Panels
from Astorios
|
| The ASTR 110HCND/12 TOPCON 590Wp from Astorios is a Solar Panel. It delivers an output power of 590 W with a module efficiency of up to 22.6%. This solar panel features an advanced N-Type TOPCon half-cut cells arranged in a 110-cell layout. This panel operates at a power voltage of 33.80 V and a current of 17.46 A, with an open-circuit voltage of 40.40 V and a short-circuit current of 18.36 A at STC conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.47 µH Shielded Power Inductor | |
Power Inductor
from Bourns
|
| The SRP3212CL-R47M from Bourns is a Shielded Power Inductor. It has an inductance of over 0.47 µH and an inductive tolerance of up to ±20%. This inductor has a current rating of 7.5 A and offers a DCR of less than 10.8 milli-ohms. It has a shielded construction for low radiation and features low loss with high efficiency. This RoHS-compliant inductor is available in a surface-mount package that measures 3.2 x 2.5 x 0.9 mm. |
| |
Download Datasheet
Product Details | |
|
