PREV 21 January 2026 NEXT

New Power Electronics Products this Week - 21 January 2026

21 January 2026 Newsletter - everything PE

New products this week. View it in your browser

New ProductsDirectoryNews.WhitepapersArticlesCalculatorsEventsWebinars
 
Weekly Edition
Date: 21 January 2026
 
Sponsored by Micross Components
 
 
Featured Products this Week
Power Diode
75 V Silicon Epitaxial Planar Zener Diode
Power Diode  from Toshiba

The CUZ75V from Toshiba is a Silicon Epitaxial Planar Zener Diode with a zener voltage of 75 V. It has a dynamic resistance of 3.4 ohms at a test current of 2 mA and provides a peak pulse power of 620 W. This Zener diode has an electrostatic discharge voltage of ±23 kV and a peak pulse current of 5 A. It has a clamp voltage of 112 V and a reverse current of 0.1 µA. It is available in a surface-mount package that measures 2.50 x 1.25 x 0.90 mm.
Download Datasheet Product Details
Power Capacitor
600 V Aluminum Electrolytic Capacitors
Power Capacitor  from Vishay

The 193 PUR-SI Series from Vishay are Aluminum Electrolytic Power Capacitors. They have capacitance values ranging from 47-870 μF with capacitance tolerances of ±20%. These power capacitors have a voltage rating of up to 600 V and up to 30 % higher ripple current. They have a useful life of more than 5000 h and a shelf-life of 1000 h. These capacitors are available in through-hole packages that measure 35 x 60 mm.
Download Datasheet Product Details
MOSFET
30 V N-Channel MOSFET
MOSFET  from Micro Commercial Components

The MCM028N03YU-TP from Micro Commercial Components is an N-Channel MOSFET. It has a drain-source voltage of 30 V, a gate threshold voltage of 1 V, and a drain-source on-resistance of up to 45 milli-ohms. This MOSFET has a continuous drain current of up to 10 A, a pulsed drain current of 40 A, and a power dissipation of less than 16 W. It is available in a surface-mount package that measures 2.10 x 2.10 x 0.85 mm.
Download Datasheet Product Details
DC to DC Converter
5 V Single-Output Step-Down DC-DC Converter
DC to DC Converter  from Calex Manufacturing

The SPH1F12S5 from Calex Manufacturing is a Single-Output Step-Down DC-DC Converter that converts an input voltage of 10.8-13.2 V to an output voltage of 5 V. It provides an output current of up to 200 mA and a load regulation of 8%. This DC-DC converter features a capacitive load of 220 µF and delivers an efficiency of up to 73%. This converter is available in a through-hole package that measures 19.5 x 7.1 x 13.4 mm.
Download Datasheet Product Details
Solar Fuse
2.5 A Solar Fuse
Solar Fuse  from Littelfuse

The SPFI02.5 from Littelfuse is a Solar Fuse designed to integrate into an in-line assembly within a wire harness. It has a voltage rating of 1000 V (DC) and a current rating of 2.5 A. This UL 248-19-certified solar fuse has a current interrupting rating of 20 kA (DC). The SPFI02.5 features a one-piece cap design for easier crimping, requires no fuse holder, and supports integration through overmolding or heat-shrink insulation.
Download Datasheet Product Details
AC to DC Converter
65 W AC-DC Converters
AC to DC Converter  from Bel Fuse

The HDP65 Series from Bel Fuse are AC-DC Converters that convert an AC input of 90-264 V to a DC output of 5-56 V. They provide an output current of 1.16-5.42 A, an output power of 65 W, and have a ripple of 1-5%. These GaN-based converters have an efficiency of up to 92% and offer a high-power density of 17.20 W/in3. These converters are available in open-frame packages that measure 25.4 x 32 x 76.2 mm.
Download Datasheet Product Details
Sponsored by Micross Components
Military & Space Grade DC-DC Power Supplies
Trusted, Efficient, Military & Space Grade DC-DC Power Supplies
Standard & custom high-reliability Hybrid & PCB DC-DC conversion solutions for Military, New Space & Deep Space, with 30+ yrs of experience, and 100K+ units deployed… Micross is the trusted one source, one solution provider of mission critical power supplies. Click here to learn more.
Gate Driver
18 V Automotive-Grade Self-Powered SiC Driver
Gate Driver  from Allegro MicroSystems

The AHV85043K18ESTR from Allegro MicroSystems is an Automotive-Grade Self-Powered Isolated SiC Driver Chipset that is optimised for driving discrete SiC FETs in applications such as automotive on-board chargers (OBC), solar inverters, industrial robotics, data center power shelves, and general power supply applications. This gate driver requires an input voltage of 10.5-13.2 V. It is available in a surface-mount package that measures 4.0 x 4.0 x 0.75 mm.
Download Datasheet Product Details
Fuses
350 A High-Speed AC Fuse
Fuses  from Mersen

The A100P350-4 from Mersen is a High-Speed AC Fuse designed for the protection of systems where lower I2t and superior reliability are needed. It has a voltage rating of 1000 V(AC)/750 V(DC) and a current rating of 350 A. This fuse has an interrupting rating of 100 kA and a controlled arc voltage that reduces stress to circuit components during fuse clearing. It is available in a screw-mount package that measures 145 x 50.8 x 38.1 mm.
Download Datasheet Product Details
LED Driver IC
Automotive-Grade Three-Channel Linear LED Driver IC
LED Driver IC  from Lumissil Microsystems

The IS32LT3152A-ZLA3-TR from Lumissil Microsystems is an Automotive-Grade Three-Channel Linear LED Driver IC with individual PWM dimming and thermal shunt. It requires an input voltage of 4.5–40 V and can source up to 150 mA per channel with ±4% current accuracy across the full automotive temperature range. This AEC-Q100-qualified LED driver features a maximum dropout voltage of 0.8 V at 150 mA per channel.
Download Datasheet Product Details
Solar Panels
246 mW Monocrystalline Solar Cell
Solar Panels  from Anysolar

The SM141K08TF from Anysolar is a Solar Cell based on monocrystalline silicon technology. It provides an open circuit voltage of 5.53 V and a short circuit current of 58.6 mA. This solar cell delivers a peak power of up to 246 mW and has a solar cell efficiency of 25%. It can operate under low light conditions while offering an increased battery life and run time in a small footprint. It is available as a module that measures 88 x 15 x 1.2 mm.
Download Datasheet Product Details
DC to DC Converter
8:1 Input Isolated DC-DC Converters
DC to DC Converter  from Cincon Electronics

The EC3SAW8 Series from Cincon Electronics are 8:1 Input Isolated DC-DC Converters that convert an input voltage of 9-75 VDC to an output voltage of 3.3-15 VDC. These converters offer efficiencies of up to 86% and feature low no-load power consumption for improved energy efficiency. They support a full load input current of up to 75 mA and provide an output current of up to 700 mA. These converters provide an input-to-output isolation of 3000 VDC.
Download Datasheet Product Details
Gate Driver
30 V High-Frequency Gate Driver IC
Gate Driver  from Diodes Incorporated

The DGD28225FN-7 from Diodes Incorporated is a High-Frequency Gate Driver IC. It requires an input voltage of 4.5-6 V. This gate driver is capable of driving two N-channel MOSFETs in a half-bridge configuration. It consists of an internal bootstrap diode, and the floating high-side driver is rated up to 30 V in a bootstrap configuration. This RoHS-compliant driver IC is available in a surface-mount package that measures 3.05 x 3.05 x 0.63 mm.
Download Datasheet Product Details
Sponsored by Micross Components
 
 
IGBT
50 A IGBT for High-Power Switching
IGBT  from Mitsubishi Electric

The CM50MXUA-24T from Mitsubishi Electric is an IGBT Module designed to provide efficient high-power switching operation for a range of applications. It has a collector-to-emitter voltage of up to 1200 V and a gate-emitter voltage of ±20 V. This IGBT has a DC collector current of up to 50 A and a gate-emitter leakage current of less than 0.5 µA. It is available as a module that measures 107.5 x 45.0 x 20.5 mm.
Download Datasheet Product Details
Solar Panels
200 W Foldable Solar Panels
Solar Panels  from Mean Well

The PV-PFSP Series from Mean Well are Foldable Solar Panels. They provide an output voltage of 21.35 V and an output current of 9.33 A. These solar panels deliver an output power of 200 W and offer a battery efficiency of more than 21.8%. They feature Metal Wrap Through (MWT) photovoltaic technology and feature a sleek, foldable structure with a magnetic handle. These solar panels weigh 6.5 kg and measure 2325 x 545 x 5 mm.
Download Datasheet Product Details
Power Inductor
1 µH Shielded Power Inductor
Power Inductor  from Bourns

The SRP3212CL-1R0M from Bourns is a Shielded Power Inductor. It has an inductance of over 1 µH and an inductive tolerance of up to ±20%. This inductor has a current rating of 5 A and offers a DCR of less than 22 milli-ohms. It has a shielded construction for low radiation and features low loss with high efficiency. This RoHS-compliant inductor is available in a surface-mount package that measures 3.2 x 2.5 x 0.9 mm.
Download Datasheet Product Details
GaN Power Transistor
100 V Automotive-Grade GaN Transistor
GaN Power Transistor  from Infineon Technologies

The IGB110S10S1Q from Infineon Technologies is an Automotive-Grade GaN Transistor that is ideal for automotive DC/DC, drives, class D audio, and USB-PD applications. This RoHS-compliant transistor has a drain-source voltage of up to 100 V, a gate threshold voltage of 2 V, and a drain-source on-resistance of less than 11 milli-ohms. It has a continuous drain current of 23 A and a pulsed drain current of less than 210 A.
Download Datasheet Product Details
EMI / EMC Filter
3-Line EMC Power Line Filter
EMI / EMC Filter  from TDK Corporation

The B84143D0090R127 from TDK Corporation is a 3-Line EMC Power Line Filter for 3-phase systems. It has a rated voltage of over 530 VAC and a rated current of 90 A. This EMC filter is optimised for long motor cables with a very high insertion loss. It complies with EN 55011 Class A & B and IEC 61300-3 Class C2 & C1 standards, UL, and CSA approvals. This IP20-rated EMC filter is available in a chassis-mount package that measures 386 x 200 x 80 mm.
Download Datasheet Product Details
AC to DC Converter
100 W Convection Cooled AC-DC Power Supplies
AC to DC Converter  from XP Power

The PGD100 Series from XP Power are Convection Cooled External AC-DC Power Supplies designed to deliver reliable and efficient power for medical, home healthcare, medical diagnostics, and instrumentation applications. These power supplies require a universal single-phase AC input of 80–264 VAC and provide auto-selected DC output voltages from 5-20 V. They meet USB PD 3.0 and QC4.0+ fast-charging protocols.
Download Datasheet Product Details
About everything PE
everything PE is a product discovery platform for Power Electronics products/Services. We list over 100,000 Products from more than 200 Companies across 50 Categories in our database and enable engineers to search for them using our customized parametric search tool.
To unsubscribe please click here{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}