PREV 11 March 2026 NEXT

New Power Electronics Products this Week - 11 March 2026

11 March 2026 Newsletter - everything PE

New products this week. View it in your browser

New ProductsDirectoryNews.WhitepapersArticlesCalculatorsEventsWebinars
 
Weekly Edition
Date: 11 March 2026
 
Sponsored by 4th European Automotive Decarbonization and Sustainability Summit 2026
 
 
Featured Products this Week
AC to DC Converter
4500 W Industrial AC-DC Power Supply
AC to DC Converter  from TDK Corporation

The TPS4500-92/184 from TDK Corporation is an Industrial AC-DC Power Supply that converts an AC input voltage of 360–528 VAC to a DC output voltage of 92–184 V. It delivers an output power of up to 4500 W and has an efficiency of 93%. This converter can be connected in series or in parallel to increase the output voltage or power and can be used as a single or a dual output, sharing the loads in any proportion up to the rated output.
Download Datasheet Product Details
MOSFET
10 kV SiC MOSFET for Mid- and High-Voltage Applications
MOSFET  from Wolfspeed

The CPM3-10000-0300A from Wolfspeed is a Silicon Carbide MOSFET developed to maximise the performance and simplify the design architecture of mid and high-voltage applications. It has a drain-source breakdown voltage of 10000 V, a gate threshold voltage of 2.8 V, and a drain-source on-resistance of less than 380 milli-ohms. This MOSFET has a total charge of 268 nC and a reverse transfer capacitance of 3.4 pF.
Download Datasheet Product Details
Solar Charge Controllers
MPPT Solar Charge Controller for PV Systems
Solar Charge Controllers  from EPEVER

The XTRA1206N G3/G3 BLE from EPEVER is an MPPT Solar Charge and Discharge Controller designed for rapid power tracking and efficient solar energy utilization. It supports 12/24 VDC automatic battery recognition and is compatible with multiple battery chemistries, including lithium, gel, and sealed lead-acid batteries. This controller offers a conversion efficiency of up to 97.9% and an MPPT efficiency exceeding 99.5%.
Download Datasheet Product Details
Fuses
2 A Surface-Mount Nano Fuse
Fuses  from Littelfuse

The 0415002.DRSP from Littelfuse is a Surface-Mount Nano Fuse. It has a voltage rating of 277 V and a current rating of up to 2 A. This RoHS-compliant fuse has a nominal melting I²t value of 12 A²s and an interrupt rating of 1500 A. This nano fuse is available in a surface-mount square package that measures 15 x 5 mm and is suitable for power supplies, lighting systems, industrial equipment, and white goods.
Download Datasheet Product Details
Gate Driver
32 V Automotive-Grade Isolated Gate Driver
Gate Driver  from STMicroelectronics

The STGAP2SAC from STMicroelectronics is a Galvanically Isolated Single Gate Driver. It requires a TTL or CMOS-based input voltage of 3.1-5.5 V. This gate driver provides galvanic isolation up to ±1200 V, ensuring safe operation while protecting the low-voltage control and interface circuitry. It offers a source capability of 4 A and a sink capability of 4 A, making it ideal for mid- and high-power automotive and industrial applications.
Download Datasheet Product Details
Power Diode
1200 V SiC Schottky Barrier Diode
Power Diode  from Micro Commercial Components

The SIC10120G4JQ-BP from Micro Commercial Components is a Silicon Carbide (SiC) Schottky Barrier Diode designed for high-efficiency, high-frequency power conversion in compact power electronics systems. It has a peak repetitive reverse voltage of over 1200 V, and a forward voltage of 1.55 V. This rectifier has a continuous forward current of up to 31 A and a reverse leakage current of up to 25 µA.
Download Datasheet Product Details
Sponsored by 4th European Automotive Decarbonization and Sustainability Summit 2026
European Automotive Decarbonization and Sustainability Summit 2026
European Automotive Decarbonization and Sustainability Summit 2026
The 4th European Automotive Decarbonization and Sustainability Summit 2026 provides a critical platform for collaboration. This summit will focus on achieving carbon neutrality across the automotive value chain, addressing key challenges and opportunities in supply chain sustainability, green manufacturing,sustainable material and regulatory compliance. Click here to learn more.
Fuses
Multifuse PPTC Resettable Fuses
Fuses  from Bourns

The MF-LSMF Series from Bourns is a family of Multifuse PPTC Resettable Fuses. They are designed to protect electronic circuits against overcurrent with fast trip performance, high voltage capability, and long-term reliability. These low-profile fuses have voltage ratings from 6-72 V and power dissipation of up to 2 W. They provide fast time-to-trip performance and have low resistance for efficient circuit protection.
Download Datasheet Product Details
GaN Power Transistor
600 V GaN Half-Bridge Transistor
GaN Power Transistor  from Infineon Technologies

The IGI60L1111B1M from Infineon Technologies is a GaN Half-Bridge Transistor that is ideal for low-power motor drives and SMPS utilising the superior switching behaviour of CoolGaN power switches. This GaN transistor has a drain-source voltage of up to 600 V, a gate threshold voltage of less than 1.2 V, and a drain-source on-resistance of 110 milli-ohms. It has a continuous drain current of up to 7.4 A, and a pulsed drain current of less than 30 A.
Download Datasheet Product Details
Solar Panels
Half-Cell Bifacial Monocrystalline PERC PV Modules
Solar Panels  from Znshine

The ZXM8-TPLDD110 Series from Znshine is a Half-Cell Bifacial Double-Glass Monocrystalline PERC PV Module. They deliver output power ranging from 535 W to 560 W at STC (Standard Test Condition) and from 402.10 W to 420.80 W at NMOT (Nominal Module Operating Temperature), with a maximum module efficiency of up to 21.43%. These solar panels provide a maximum power voltage of 31-32 V, and a maximum current of up to 17.5 A.
Download Datasheet Product Details
Battery Management IC
Power-Saving Energy Harvesting Power Supply Control
Battery Management IC  from ROHM Semiconductor

The ML9077GDZ05B from ROHM Semiconductor is a Power-Saving Energy Harvesting Power Supply Control LSI designed to control the charging of energy harvester current to a rechargeable battery. This energy harvesting control IC supports direct charging of the energy harvester current to a rechargeable battery with a potential difference as low as 0.1 V when VSC is greater than 2 V. It features an extremely low operating current of approximately 80 nA.
Download Datasheet Product Details
GaN Power Transistor
40 V Rad-Hard eGaN Power HEMT
GaN Power Transistor  from EPC Space

The FBG04N08AC from EPC Space is a Radiation-Hardened eGaN Power Switching HEMT that has been specifically designed for critical applications in commercial satellite space and other high-reliability environments. It has a drain-source voltage of over 40 V, a gate-source threshold voltage of 1.4 V, and a drain-source on-resistance of less than 28 milli-ohms. This transistor has a continuous drain current of up to 8 A.
Download Datasheet Product Details
Power Inductor
1 mH Automotive-Grade Common Mode Choke
Power Inductor  from Coilcraft

The CMA1305-105LD from Coilcraft is an Automotive-Grade Common Mode Choke for power line applications. This power inductor has an inductance of 1 mH and a common mode peak impedance of 4.1 kilo-ohms at 2.5 MHz. It has an RMS current of 2.1 A and a DCR of less than 86 milliohms. This inductor features high isolation voltage up to 1500 V. It is available in a surface-mount package measuring 13 x 13 x 5.6 mm.
Download Datasheet Product Details
Sponsored by 4th European Automotive Decarbonization and Sustainability Summit 2026
 
 
Power Resistor
Automotive-Qualified Thin Film Power Resistor
Power Resistor  from Vishay

The CHA02016-100RGFTF from Vishay is an Automotive-Qualified Thin Film Power Resistor that has a very large range of frequency from DC to 70 GHz. This AEC-Q200-qualified resistor has a resistance of 100 ohms and a resistance tolerance of up to ±5%. It has a power rating of up to 0.100 W and a limiting element voltage of up to 30 V. This RoHS-compliant resistor utilizes advanced flip-chip metal film technology.
Download Datasheet Product Details
Power Switch IC
1.6 V Photorelay for Test and Measurement
Power Switch IC  from Toshiba

The TLP3412SRLB from Toshiba is a Photorelay that is suitable for ATE (Automatic Test Equipment), probe cards, measuring instruments, high-speed logic IC testers, and high-speed memory tester applications. It requires a maximum forward voltage of 1.6 V and can handle an on-state current of up to 400 mA. This normally-open photorelay has an on-state resistance of less than 1.5 ohms and an isolation voltage of 500 Vrms.
Download Datasheet Product Details
LDO Voltage Regulator
AEC-Q100 Qualified CMOS-Based Positive Voltage Regulators
LDO Voltage Regulator  from ABLIC

The S-19243xxxH from ABLIC are Automotive-Grade CMOS-based Positive Voltage Regulators. These LDO regulators require an operational voltage of 2.5-10 V. They provide an output voltage of 0.9-6 V and have a low current consumption of 2.0 µA. These LDO regulators are based on CMOS technology and deliver a high output current of 120 µA. These AEC-Q100 qualified LDO regulators are ideal for automotive use.
Download Datasheet Product Details
DC to DC Converter
20 W Regulated Medical DC-DC Converter
DC to DC Converter  from XP Power

The JMR2024S12 from XP Power is a Regulated Medical DC-DC Converter that converts an input voltage of 9-36 V to an output voltage of 12 V DC. This ultra-compact converter delivers an output current of 1670 mA, an output power of 20 W, and has an efficiency of 88.5%. This converter is compliant with IEC 60601-1 medical safety standards. It offers a 4:1 input voltage range, with a ±10% output trim, and operates from -40°C to +100°C.
Download Datasheet Product Details
EMI / EMC Filter
250 V Single-Phase Power-Line Filter
EMI / EMC Filter  from Kemet Corporation

The FLLE2005ASRW2 from Kemet Corporation is a Single-Phase Power Line Filter that is ideal for shielded, compartment-type screened rooms, secure communications areas, and MRI-screening applications. It has a rated voltage of 250 V and a rated current of 5 A. This filter offers high attenuation performance with high accuracy in a robust construction, resulting in an optimized industry-standard performance.
Download Datasheet Product Details
DC to AC Inverter
750 W DC/AC Sine Wave Inverter
DC to AC Inverter  from Premium PSU

The ODS-750-7277-U from Premium PSU is a DC/AC Sine Wave Inverter that converts a DC input voltage of 154 V to an AC output voltage of 230 V. This inverter has a nominal input voltage of 110 V and provides an output current of 13 A. It delivers a power of 750 W and achieves an efficiency of 89%. This inverter offers high input-to-output isolation of 3000 V. It operates over a temperature range from −25°C to +55°C.
Download Datasheet Product Details
About everything PE
everything PE is a product discovery platform for Power Electronics products/Services. We list over 100,000 Products from more than 200 Companies across 50 Categories in our database and enable engineers to search for them using our customized parametric search tool.
To unsubscribe please click here{{Sender_Name}}
{{Sender_Address}}, {{Sender_City}}, {{Sender_State}}, {{Sender_Zip}}