| Featured Products this Week |
|
|
| Buck Converter ICs for On-Board Power Supply Applications | |
PMIC
from Sanken Electric
|
| The SI-8050JD from Sanken Electric are Buck Converter ICs that are ideal for audio-visual equipment, office automation equipment (e.g., printer), and onboard power supply applications. They require an input voltage of up to 43 V and provide an output voltage of 3.3 - 12 V. These buck converter ICs provide an output current of 1.5 A and have an efficiency of up to 88%. They feature few components and have a downsized choke coil with a switching frequency of 125 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Pair Octal-Port Power Sourcing Controller IC for Switching Applications | |
Power Over Ethernet IC
from Skyworks Solutions
|
| The SI3473B-IM from Skyworks Solutions is a 2-Pair Octal-Port Power Sourcing Equipment Controller IC that has been designed for use in end spans (switches) and midspans (injectors). It requires an input voltage of 50 - 57 V. This controller manages eight independent ports, each incorporating the necessary detection and classification features as per IEEE standards. It includes power under-voltage lockout, output current limit, short-circuit protection, and thermal overload detection. |
| |
Download Datasheet
Product Details | |
|
|
|
| Battery Backup Power Manager IC for Automotive GPS Applications | |
Battery Management IC
from Analog Devices
|
| The LTC4040 from Analog Devices is a Battery Backup Power Manager IC that has been designed for battery backup applications. It requires an input voltage of 3.5 – 5.5 V. It incorporates a high-current step-up DC/DC regulator capable of supporting a single-cell Li-Ion or LiFePO4 battery for backup power. This battery management IC (BMIC) has adjustable input current limits and an external disconnect switch for over-load protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 kW EV Traction Motor for Hybrid Electric Vehicle Applications | |
EV Traction Motor
from Danfoss
|
| The EM-PMI375-T200-1900 from Danfoss is an EV Traction Motor that is ideal for generators for diesel-electric/serial hybrid vehicles, traction/propulsion motors, and generators/motors for parallel hybrid applications. It delivers a continuous output power of 40 kW and has an efficiency of up to 96%. This motor provides a torque of 203 Nm and has a speed of up to 3800 rpm. It includes synchronous reluctance-assisted permanent magnet (SRPM) technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP6K9K-Rated Energy and Power Battery System for Powertrain Applications | |
Electric Vehicle Battery
from Forsee Power
|
| The FLEX 56 PLUS from Forsee Power is an Energy and Power Battery System that has been designed for all-electric and hybrid heavy vehicles. It requires a supply voltage of 700 V and provides a capacity of 400 Ah (with 5 packs). This battery system delivers a continuous charging power of 560 kW and a discharging power of 840 kW (5 packs). It enables easy integration and supports two variants of varying energy density within a single form factor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Phase-Controlled Rectifier for Power Supply Applications | |
Silicon Controlled Rectifier
from Powerex
|
| The C450PB from Powerex is a Phase-Controlled Rectifier that is ideal for power supply, motor control, and VAR generator applications. It has a break-over voltage of up to 1200 V and a break-over current of less than 1640 A. This thyristor has a gate trigger voltage of up to 5 V and a gate trigger current of 0.2 A. It features a low on-state voltage, reducing power loss. It boasts high di/dt and dv/dt capabilities that ensure robust performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 230 V Bidirectional Sidac for Commercial Applications | |
Sidac
from Shindengen America
|
| The K1V22(W) from Shindengen America is a Bidirectional Sidac that has been designed to provide greater reliability to meet diverse application needs. It has a break-over voltage of up to 230 V and a break-over current of less than 0.5 mA. This RoHS-compliant sidac is capable of wide-ranging pulse generation which allows direct switching with commercial power supplies. It is available in a through-hole package that measures 60 x 4.4 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by PEMD 2024 | | PEMD 2024 | | PEMD is a world-leading forum on power electronics, machines and drives, where industry and academia converge to network, publish results of exciting new research, showcase technical advances, and share knowledge with a growing community.The high-quality, technically focused program includes peer-reviewed paper sessions, keynote addresses from thought leaders, industry briefing sessions, and interactive tutorials. Click here to learn more. | | | |
|
|
| 32 V WEEE-Compliant Diac for Speed Control Applications | |
Diac
from Fagor Electronica
|
| The FD0201YR00AM from Fagor is a Diac that is ideal for simplified gate control circuits, starting element in fluorescent lamp ballasts, universal-motor speed control, heat control, and other switching applications. It has a break-over voltage of 32 V and a break-over current of less than 15 µA. This RoHS-compliant diac is manufactured using Silicon material and glass hermetically-sealed for external protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V AC Thyristor Power Switch for Safety Load Applications | |
Triac
from WeEN Semiconductors
|
| The ACT108-800E from WeEN Semiconductors is an AC Thyristor Power Switch that is ideal for fan motor circuits, pump motor circuits, low-power, highly inductive, resistive, and safety load applications. It has a break-over voltage of 600 V and a break-over current of less than 8.8 A. This thyristor has a gate trigger voltage of over 0.15 V and a gate trigger current of less than 10 mA. It features exclusive negative gate triggering and full-cycle AC conduction. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W Slim-Profile High-Power Metal Clad Braking Resistors | |
Power Resistor
from Riedon Resistors
|
| The BRS200 Series from Riedon Resistors are Slim-Profile High Power Metal Clad Braking Resistors. They have a resistance of 1 - 2000 ohms and resistance tolerances of ±1%, ±5%, and ±10%. These resistors have a power rating of 200 W. They are designed using wirewound technology in a compact package and provide non-inductive winding design options. These RoHS-compliant resistors are available in a chassis-mount package that measures 5.91 x 3.15 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W Miniature AC-DC Converter | |
AC to DC Converter
from Qualtek Electronics
|
| The QGKF-100-24 from Qualtek Electronics is an AC-DC Converter that steps down an AC input voltage of 90 - 264 V to a DC output voltage of 24 V. It delivers an output power of 100 W and has an efficiency of up to 88%. This RoHS-compliant converter offers a built-in active power factor correction (PFC) function with PF>0.93. It can withstand up to 300 V (AC) surge input for 5 s and provides high reliability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4500 V Trench + Field Stop IGBT for Traction Applications | |
IGBT
from Infineon Technologies
|
| The FF450R45T3E4B5BPSA1 from Infineon Technologies is a Trench + Field Stop IGBT that is ideal for traction drives and medium-voltage converter applications. It has a collector-emitter breakdown voltage of up to 4500 V, a saturated collector-emitter voltage of 2.35 V, and a gate-emitter voltage of 6 V. This RBSOA-rated IGBT module has a continuous collector current of less than 450 A and a gate-emitter leakage current of up to 400 nA. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Speed N-Channel Junction Field Effect Transistor Switch | |
Junction Field Effect Transistor (JFET)
from Linear Systems
|
| The 2N4391 TO-18 3L RoHS from Linear Systems is a Single N-channel Junction Field Effect Transistor Switch that is ideal for industrial and commercial applications. It has a drain-source voltage of up to 0.3 V and a gate-source voltage of -40 V. This RoHS-compliant switch has a power dissipation of less than 1.8 W. It features low on-resistance, ensuring efficient operation. This JFET provides fast switching capabilities with a shorter turn-on time. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 V Automotive Qualified NPN Transistor | |
Bipolar Junction Transistor
from Nexperia
|
| The PHPT60610NYX from Nexperia is an Automotive-Qualified Bipolar NPN Transistor that is ideal for power management, load switches, linear mode voltage regulators, backlighting applications, relay replacements, and motor drive applications. It has a collector-emitter breakdown voltage of up to 60 V and an emitter-base voltage of less than 7 V. This transistor has a base current of up to 1.5 A and a collector current of less than 20 A. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 650 V Enhancement Mode GaN Power Transistor for UPS Applications | |
GaN Power Transistor
from STMicroelectronics
|
| The SGT65R65AL from STMicroelectronics is an Enhancement Mode GaN Power Transistor that is ideal for AC-DC converters, AC-DC PSU for server and telecom, LED illumination, and uninterrupted power supply (UPS) applications. This transistor has a drain-source voltage of up to 650 V, a gate threshold voltage of less than 1.8 V, and a drain-source on-resistance of 49 milli-ohms. It has a continuous drain current of up to 25 A and a pulsed drain current of less than 70 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 220 W Waterproof Multi-Chemistry On-Board Battery Charger | |
On-Board Charger
from NOCO
|
| The GEN5X3 from NOCO is a Multi-Chemistry On-Board Battery Charger that has been designed to withstand for hours underwater and in extreme conditions. It requires an AC input voltage of 120 - 240 V. This charger delivers a DC output power of 220 W and a charging current of 15 A. It supports force mode to charge batteries below 1 V and includes charging mode LEDs which flash and illuminate the selected mode. |
| |
Download Datasheet
Product Details | |
|
|
|
| 230 V Single-Phase Surge Voltage Arrester for Power Supply Applications | |
Surge Suppression IC
from Weidmuller
|
| The 2827620000 from Weidmüller is a Single-Phase Surge Voltage Arrester that has been designed to efficiently minimize the possibility of interference coupling induced by transient surge voltages, even well below the limitations specified by the insulation coordination standards DIN VDE 0110-3 / EN 60664-3. It requires an input voltage of 230 V and can withstand a short-circuit current of up to 100 kA. It integrates an additional fuse into the arrester to further enhance the protection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16-Channel Constant-Current LED Driver for LCD Backlight Applications | |
LED Driver IC
from Diodes Incorporated
|
| The AL58263T24E-13 from Diodes Incorporated is a 16-Channel Constant-Current LED Driver that is ideal for indoor and outdoor LED video displays, variable message signs (VMS), traffic signs, outdoor billboard signage, and LCD backlighting applications. It requires an input voltage of 3 - 5.5 V and provides an output voltage of 15 V. This driver is available in a surface-mount package that measures 7.70 x 6.40 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| WPC Qi-Compliant Wireless Power Transmitter Coil | |
Wireless Charging Coil
from Wurth Elektronik
|
| The 760308101104 from Wurth Elektronik is a Wireless Power Transfer Transmitter Coil that is compliant with WPC Qi specifications. It has an inductance of 6.8 µH, an inductance tolerance of ±10%, and a self-resonant frequency (SRF) of 20 MHz. This transmitter coil has a dynamic contact resistance (DCR) of less than 125 milli-ohms and a quality factor of 42. It is available in a through-hole package that measures 20.5 x 2.8 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP40-Rated EV Synchronous Traction Motor | |
EV Traction Motor
from Johnson Electric
|
| The UFM1BNJ5RN from Johnson Electric is an EV Synchronous Traction Motor that has been designed to fulfill the torque and integration needs of the customer’s application. It requires a supply voltage of 12 - 230 V (AC) and delivers an output power of up to 0.9 W. This traction motor provides a torque of 3 Nm and has a speed of 300 rpm. It can be stopped when an appropriate voltage is supplied, without being over-heated. |
| |
Download Datasheet
Product Details | |
|
