| Featured Products this Week |
|
|
| 90 W Power-Over-Ethernet Injector for Lighting Applications | |
Power Over Ethernet IC
from Tycon Systems
|
| The TP-DCDC-A2456GD-BT from Tycon Systems is a Power-Over-Ethernet Injector that is designed for 802.3bt devices from legacy 24 V (AC) power sources, 24 V (DC) remote power systems, IEEE802.3bt industry-standard device power from batteries and PoE lighting applications. It requires an input voltage of 22 - 35 V. This PoE injector delivers an output power of 90 W. It integrates a DC-DC converter and comprises dual AC/DC inputs for maximum flexibility. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quasi-Resonant AC-DC Converter for Industrial Equipment Applications | |
PMIC
from ROHM Semiconductor
|
| The BM2SC122FP2-LBZ from ROHM Semiconductor is a Quasi-Resonant AC-DC Converter that is ideal for AC adaptors, household appliances, and industrial equipment applications. It requires an input voltage of 15 - 27.5 V. This power management IC (PMIC) integrates a built-in 1700 V SiC-MOSFET. It features a quasi-resonant operation that enables soft switching and helps to keep electromagnetic interference (EMI) low. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single N-Channel MOSFET Power Switch for USB 3G/4G/5G Data Card Applications | |
Power Switch IC
from AiT Semiconductor
|
| The A4775E5R from AiT Semiconductor is a Single N-channel MOSFET Power Switch that has been designed for power rail on/off control and full protection functions applications. It requires an input voltage of 2 – 5.5 V and provides an output current of less than 3.6 A. This MOSFET power switch features a built-in charge pump that drives the internal MOSFET switch and includes a fault flag to signal any issues caused by large current changes. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W Wireless Power Receiver Coil for Wearable Applications | |
Wireless Charging Coil
from Wurth Elektronik
|
| The 760308102306 from Wurth Elektronik is a Wireless Power Receiver Coil that is compliant with Qi, Air Fuel Alliance, NFC, and proprietary specifications. It has an inductance of 8 µH and an inductance tolerance of ±10%. This coil has a quality factor of 47 and a dynamic contact resistance (DCR) of 400 milli-ohms. It delivers an output power of 40 W. This receiver coil combines WPT and NFC technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1050 V N-Channel Enhancement Mode Silicon IGBT | |
IGBT
from Toshiba
|
| The GT50NR21 from Toshiba is an N-Channel Enhancement Mode Silicon IGBT that is ideal for voltage-resonant inverter switching applications. It has a collector-emitter voltage of up to 1050 V, a gate-emitter voltage of ±25 V, and a saturated collector-emitter voltage of 1.8 V. This IGBT has a collector current of less than 50 A and a gate-emitter leakage current of ±100 nA. It is based on the 6.5th generation technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 420 Ah Lead-Acid Battery for Emergency Lighting Applications | |
Electric Vehicle Battery
from KIJO Power
|
| The GY3-EVF-420A from KIJO Power is a Lead-Acid Battery that is ideal for UPS/EPS, power systems, telecommunications systems, emergency lighting, auto control systems, solar/wind generating storage cyclic and other general-purpose applications. It has a capacity of 420 Ah (20 hours). This battery provides a nominal voltage of 6 V, a charging current of up to 84 A, and a discharging current of less than 4000 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 V Triac for Valve Control Applications | |
Triac
from Littelfuse
|
| The L0109NTRP from Littelfuse is a Triac that is designed for white goods applications such as valve controls in washing machines as well as the replacement of mechanical and hybrid relays where long life is required. It has a break-over voltage of 800 V and a break-over current of 10 mA. This triac has a gate trigger voltage of 1.3 V and a gate trigger current of 5.7 mA. It can directly interconnect with microprocessor drivers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Li-ion/Polymer Switching Charger IC for Medical Applications | |
Battery Management IC
from Monolithic Power Systems
|
| The MP2759AGQ-0000-P from Monolithic Power Systems is a Switching Charger that has been designed for applications with 1-cell to 6-cell series Li-ion or Li-polymer battery packs. It requires an input voltage of up to 36 V and an input current of less than 3 A. This IC can support various types of battery chemistries with different battery regulation voltage levels. It can charge the battery with an available input power supply in four phases. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 A Negative Temperature Coefficient Thermistor for SMPS Applications | |
Inrush Current Limiter
from SET Electronics
|
| The SCL12D-13LSBA01 from SET Electronics is an Inrush Current-Limiting Negative Temperature Coefficient Thermistor that is ideal for switch-mode power supplies, transformers, inverters, soft-start motors, LED driver circuits, and halogen lamp applications. It has a current rating of 5 A and a resistance of 12 ohms. The temperature of this thermistor increases due to self-heating while the resistance value decreases, which allows it to be used for inrush current limiting. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 V Enhancement Mode GaN Transistor for Solar Micro Inverter Applications | |
GaN Power Transistor
from Innoscience
|
| The ISG6108QA from Innoscience is an Enhancement Mode GaN Field Effect Transistor that is ideal for AC-DC/DC-DC/DC-AC power supply, power factor correction (PFC), QR flyback, ACF, half-bridge, full-bridge, PD adaptor, LED lighting, solar micro inverter, server, and telecom power supply applications. This transistor has a drain-source voltage of up to 700 V and a drain-source on-resistance of 230 milli-ohms. It has a continuous drain current of up to 5 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 mF Aluminum Electrolytic Capacitor for Wind Power Converter Applications | |
Supercapacitor
from TDK Corporation
|
| The B43733A6108M658 from TDK Corporation is an Aluminum Electrolytic Capacitor that has been designed to provide longer useful life and high reliability. It has a capacitance of 1000 µF and a capacitance tolerance of ±20%. This supercapacitor has a voltage rating of 500 V and an equivalent series resistance (ESR) of 100 milli-ohms. It boasts excellent electrical characteristics with all-welded construction, ensuring reliable electrical contact. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6.6 kW On-Board Charger for Electric Vehicle Applications | |
On-Board Charger
from Rawsun Power
|
| The ROBC6.6-20380 from Rawsun Power is an On-Board Charger that is ideal for hybrid electric vehicles, full electric vehicles, electric buses, electric logistics vehicle applications. It requires an AC input voltage of 85-264 V. This charger delivers a DC output power of 6.6 kW and has an efficiency of 95.5%. It can operate over the rated grid voltage for different customer battery packs and special designs of DC voltage output. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Load Switch IC for Notebook Applications | |
Power Switch IC
from Renesas
|
| The SLG5NT1477V from Renesas is a Single-Channel Load Switch IC that has been designed for watch power rail switching, tablet power rail switching, smartphone power rail switching, and notebook power rail switching applications. It requires an input voltage of 3 - 5.25 V and . This load switch features a logic level ON pin that is capable of supporting a CMOS logic of 0.85 V. It has a fast turn-on time and has an output discharge circuitry that supports discharged load conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Field Stop IGBT for UPS Applications | |
IGBT
from onsemi
|
| The FGY75T120SWD from onsemi is a Field Stop IGBT ideal for boost and inverter in solar systems, UPS, and energy storage system applications. It has a collector-emitter breakdown voltage of up to 1200 V, a saturated collector-emitter voltage of 1.68 V, and a gate-emitter voltage of 20 V. This IGBT has a continuous collector current of less than 150 A and a gate-emitter leakage current of up to 400 nA. It has a power dissipation of less than 714 W. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 A IP20-Rated Current-Controlled Inrush Current Limiter | |
Inrush Current Limiter
from Block
|
| The ESG 7 from Block is a Current-Controlled Inrush Current Limiter that has been designed to limit the inrush current present in power tools, transformers, and other loads with high switch-on or inrush currents. It has a voltage rating of up to 230 V and a current rating of 10 A. This inrush current limiter has a resistance of 7.8 ohms. It features dynamic limit times for optimum inrush of loads with high inrush currents. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microstepping Motor Driver IC for Robotic Applications | |
Motor Driver IC
from Allegro MicroSystems
|
| The A5985 from Allegro MicroSystems is a Microstepping Motor Driver IC that has been designed to control bipolar stepper motors from full-step up to 1/32-step modes. It requires an input voltage of up to 40 V and provides an output current of less than 2 A. It features a proprietary Adaptive Percent Fast Decay (APFD) algorithm to optimize the current waveform over a wide range of stepper speeds and stepper motor characteristics. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 W Isolated AC-DC Converter for Medical Applications | |
AC to DC Converter
from Digital Power
|
| The DPMTC30-15S from Digital Power is an AC-DC Converter that steps down an AC input voltage of 90 - 264 V to a DC output voltage of 15 V. This switching power module delivers an output power of up to 30 W and has an efficiency of 86%. It has a low no-load input power and provides a regulated output with low ripple and noise. This isolation class II converter is available in a PCB mount package that measures 64.1 x 45.6 x 23.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Current Buck LED Driver for Constant Voltage Supply Applications | |
LED Driver IC
from Analog Devices
|
| The LT3592 from Analog Devices is a High-Current Buck LED Driver that is ideal for automotive signal lighting, industrial lighting, constant-current, and constant voltage supply applications. It requires an input voltage of 3.6 – 36 V. This LED driver uses an external sense resistor to accurately monitor and regulate the output current. It can dim the output current by a factor of 10, which is particularly useful for applications such as nighttime brake lights. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9-Channel Power Management IC for Automotive Infotainment Applications | |
PMIC
from NXP Semiconductors
|
| The MC33PF8101A0ES from NXP Semiconductors is a 9-channel Power Management IC that is designed for NXP’s high performance i.MX 8-based applications. It requires an input voltage of 2.7 - 5.5 V. This power management IC (PMIC) integrates five high-efficiency buck converters and three linear regulators for powering the processor, memory, and miscellaneous peripherals. It comprises built-in one-time programmable memory to store key startup configurations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Autonomy Battery Pack for Urban Light Electric Vehicles | |
Electric Vehicle Battery
from Forsee Power
|
| The GO 1.6 power from Forsee Power is an Autonomy Battery Pack that is designed for individual urban light electric vehicle applications. It has a cell capacity of 30 Ah. This battery requires an input voltage of 50.4 V. It provides a charging current of 30 A and a discharging current of less than 120 A. It offers exceptional flexibility with support for CAN 2.0 interface and the ability to connect up to three batteries in parallel using the Forsee Power’s switching box. |
| |
Download Datasheet
Product Details | |
|
