| Featured Products this Week |
|
|
| 650 V Medium Voltage Varistor for Electronic Protection Applications | |
Varistor
from Bourns
|
| The DV 250 K 3225 from Bourns is a Medium Voltage Varistor that has been designed to protect electronic equipment against high voltage surges in the medium voltage region. It has an AC voltage rating of 250 V (RMS), a DC voltage rating of 320 V, and a clamping voltage of 650 V. This varistor provides superior transient energy absorption due to its improved energy volume distribution and power dissipation. It is packaged in a leadless chip design. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 µH Wireless Charging Receiving Coil for Industrial Electronic Applications | |
Wireless Charging Coil
from RDI
|
| The RCC-2020-RX-NL from RDI is a Wireless Charging Receiver Coil that is suitable for IoT, wearables, portable electronics, consumer electronics, smartphone charging, portable audio and industrial electronics applications. It has an inductance of 12 µH and an inductance tolerance of ±10%. This coil has a quality factor of 20 and a dynamic contact resistance (DCR) of 275 milli-ohms. It benefits from high permeability shielding. |
| |
Download Datasheet
Product Details | |
|
|
|
| 470 µF Aluminium Electrolytic Capacitor | |
Supercapacitor
from Wurth Elektronik
|
| The 860160475022 from Wurth Elektronik is an Aluminium Electrolytic Capacitor that is ideal for military and marine applications. It has a capacitance of 470 µF and a capacitance tolerance of ±20%. This capacitor has a voltage rating of 25 V and an impedance of less than 0.21 ohms. It operates over a temperature range from -55°C to +105°C. This capacitor is available in a through-hole package that measures 10 x 12.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V Compact NPN Transistor for Handheld Applications | |
Bipolar Junction Transistor
from PANJIT Semiconductor
|
| The MMDT2222ATB6 _R1_00001 from PANJIT Semiconductor is an NPN Transistor that is ideal for use in hand-held computers, PDAs, and general purpose amplifier applications. It has a collector-emitter voltage of up to 40 V, a base-emitter voltage of 6 V, and a saturated collector-emitter voltage of 1 V. This RoHS-compliant transistor has a collector current of less than 600 mA. It includes two electrically isolated dual NPN switching transistors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Pair Octal-Port Power Sourcing Equipment Controller IC for IP Phone Applications | |
Power Over Ethernet IC
from Skyworks Solutions
|
| The SI3472B-IM from Skyworks Solutions is a 2-Pair Octal-Port Power Sourcing Equipment Controller IC that has been designed for use in end spans (switches) and midspans (injectors). It requires an input voltage of 50 - 57 V. This controller manages up to eight independent ports and each port is equipped with the necessary detection and classification capabilities by the IEEE standards. It supports powered device disconnect options with a DC-sense algorithm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 22 kW On-Board Charger for Marine eDrives Applications | |
On-Board Charger
from Stercom Power Solutions
|
| The OBC 22kW-850 from Stercom Power Solutions is an On-Board Charger ideal for public transportation, construction machinery, and marine eDrives applications. It requires an AC input voltage of 190 - 504 V. This charger delivers a DC output power of up to 22 kW, a DC output voltage of 550 - 850 V, and a charging current of up to 32 A. It utilizes advanced silicon carbide technology to deliver high efficiency and is compatible with various battery management systems (BMS). |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | London EV Show 2024 | | The London EV Show 2024 will host a massive 14,000+ sqm expo floor at ExCel London for leading EV businesses to exhibit the latest models, next-gen electrification technology, innovative products & solutions to over 15,000+ enthused audiences.Click here to learn more. | | | |
|
|
| Buck Regulator IC for Wearable Applications | |
PMIC
from Renesas
|
| The DA9230 from Renesas is a Buck Regulator IC that is ideal for wearables, smart devices, smoke detectors, portable medical devices, remote sensors, and high-efficiency low-power applications. It requires an input voltage of 2.5 - 5.5 V and an output voltage of 0.6 - 1.9 V. This power management IC (PMIC) consists of a buck control logic, GPO control, fault handling circuit, power MOSFETs, and an I2C interface. It has an improved battery life due to very low quiescent current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 V Electric Motor/Generator for Power Generation Applications | |
EV Traction Motor
from Cascadia Motion
|
| The HVH250-115 from Cascadia Motion is an Electric Motor/Generator that is ideal for on/off-highway vehicles, power generation, and other special high-power demand applications. It provides a DC output voltage of up to 700 V and has an efficiency of over 95%. This electric motor weighs 57.2 kg and is available as fully housed motors or as rotor/stator assemblies. It is a powerful, durable, and rugged motor that achieves world-class power density. |
| |
Download Datasheet
Product Details | |
|
|
|
| 24-Cell Lithium-ion Graphite-NMC Battery for Marine Applications | |
Electric Vehicle Battery
from Leclanche SA
|
| The 204Ah 4s6p from Leclanche SA is a Lithium Titanate Oxide Battery that is ideal for road (electric vehicles) and marine vehicle applications. This battery provides a charging voltage of 11.2 V, energy of 1.8 kWh, and a capacity of 204 Ah. It integrates 24 cells and is based on lithium titanate-oxide technology that offers superior performance and longevity compared to conventional lithium-ion batteries. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electric Axle for Heavy-Duty Commercial Vehicle Applications | |
Electric Axle
from ZF Commercial Vehicle Solution
|
| The AxTrax 2 from ZF Commercial Vehicle Solution is an Electric Axle that has been designed for heavy-duty commercial vehicle applications. It delivers a continuous output power of up to 210 kW and a peak output power of 250 kW. This e-axle provides a torque of 19161 lb-ft. It features a coaxial e-axle design incorporating an oil-cooled permanent synchronous motor (PSM) with advanced hairpin e-motor technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single Cell Li-ion Battery Charger IC for Portable Applications | |
Battery Management IC
from STMicroelectronics
|
| The STC4054GR from STMicroelectronics is a Single Cell Li-Ion Battery Charger that has been designed for single-cell Li-Ion batteries. It requires an input voltage of 4.25 - 6.5 V. This IC does not require a MOSFET, external sense resistor, or blocking diode, which makes it suitable for compact portable applications. It can charge single-cell lithium-ion batteries directly from a USB port. This battery management IC (BMIC) provides a charging current of 800 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| 535 W Bifacial Mono-Crystalline Solar Panel | |
Solar Panels
from GautamSolar
|
| The G2X-Bifacial-1695-HAD from GautamSolar is a Bifacial Mono-Crystalline Solar Panel that consists of 144 cells. It delivers an output power of 535 W (peak) and has an efficiency of 20.71%. This solar panel utilizes a fully automatic setup and the latest machines during the manufacturing and quality testing process to achieve high-power, efficiency, reliability, durability, and strength. It has undergone a non-destructive cell cutting procedure to ensure zero micro-cracks. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 80 A Inrush Current Limiter for Power Distribution Applications | |
Inrush Current Limiter
from Ametherm
|
| The MM35 0R280-DIN from Ametherm is an Inrush Current Limiter that is ideal for inrush current protection for high-power industrial applications such as AC motors, transformers, power supplies, or inverters. It has a voltage rating of up to 680 V, a current rating of 80 A, and a resistance of 0.2 ohms. This limiter can withstand an input energy of less than 1200 J, thereby ensuring the reliability and longevity of electrical systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 µH Shielded High Power Inductor for Large Current Applications | |
Power Inductor
from Venkel
|
| The SHPI737345S-101MU from Venkel is a Shielded High-Power Inductor. This inductor has an inductance of 100 µH and an inductance tolerance of ±20%. It has a saturation current of 0.6 A and a dynamic contact resistance (DCR) of 0.61 ohms. This RoHS-compliant inductor has a magnetically shielded construction that reduces electromagnetic induction and improves performance. It is available in a surface-mount package that measures 7.3 x 7.3 x 3.4 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 µF Automotive-Qualified Aluminum Electrolytic Capacitor | |
Supercapacitor
from Panasonic Corporation
|
| The ECA1AHG102 from Panasonic Corporation is an Automotive-Qualified Aluminum Electrolytic Capacitor that has been designed for industrial and commercial applications. It has a capacitance of 1000 µF and a capacitance tolerance of ±20%. This RoHS-compliant capacitor has a voltage rating of 10 V. This AEC-Q200-qualified capacitor offers high endurance, rated for operation at 105°C for durations ranging from 1000 to 2000 hours. |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 A Automotive-Qualified Current Sense Transformer | |
Power Transformer
from Coilcraft
|
| The CST3015-050ED from Coilcraft is an Automotive-Qualified Current Sense Transformer. This transformer requires a primary current of 80 A. It has an inductance of 0.8 mH and an inductance tolerance of 25%. This AEC-Q200 Grade 1-qualified transformer has a turns ratio of 1:5. It includes a ferrite core material and has very low primary DC resistance to control the core loss, which makes it ideal for designs operating up to 1 MHz and beyond. |
| |
Download Datasheet
Product Details | |
|
|
|
| ASIL-B-Certified Electric Vehicle Communication Controller | |
EV ECU
from Sensata Technologies
|
| The EVCC from Sensata Technologies is an Electric Vehicle Communication Controller that has been designed to ensure seamless integration and communication between electric vehicles and charging stations, thereby enhancing efficiency and reliability for all charging needs. It requires an input voltage of 8 - 32 V. This electronic control unit (ECU) is based on the latest generation technology that supports both CCS1 and CCS2 charging inlets. |
| |
Download Datasheet
Product Details | |
|
|
|
| True RMS AC Current Transducer for Non-Sinusoidal Current Measurements | |
Current Transducer
from CR Magnetics
|
| The CR4111S-50 from CR Magnetics is a True RMS AC Current Transducer that is designed for accurate measurement in applications where AC current waveforms are not purely sinusoidal. It requires an input current of 0 - 50 A. This current transducer provides an output current of 0.004 - 0.02 A and a linearity error of 10 - 100% (full-scale). It offers highly accurate and precise measurements, making them perfect for phase-fired controlled heaters. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | |
|
|
| 30 A Single-Phase Dual-Pole DC Line Filter | |
EMI / EMC Filter
from Schurter
|
| The 5500.2233 from Schurter is a Single-Phase DC Line Filter that is optimized for DC-supplied applications. It has a current rating of 24 A. This filter has a current rating of 5-30 A. It provides standard attenuation in a dual-pole configuration and is ideal for filtering signals in equipment according to IEC/UL 62368-1. This UL-certified filter has a dielectric withstanding voltage of up to 2.7 kV (DC). It is available in a chassis-mount package that measures 89 x 71 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surge Stopper IC for Battery-Powered Applications | |
Surge Suppression IC
from Analog Devices
|
| The LT4356-3 from Analog Devices is a Surge Stopper IC that protects loads from high-voltage transients. It requires an input voltage of 4 - 80 V. This surge stopper regulates the output during an over-voltage event by controlling the gate of an external N-channel MOSFET. Therefore, the output is limited to a safe value to ensure the device's proper functioning. It also monitors the voltage drop between the supply and SNS pins to protect against over-current faults. |
| |
Download Datasheet
Product Details | |
|
