| Featured Products this Week |
|
|
| 1 mF Aluminum Electrolytic Capacitor for SMPS Applications | |
Supercapacitor
from Wurth Elektronik
|
| The 860160478028 from Wurth Elektronik is an Aluminum Electrolytic Capacitor that has been designed specifically for long-life electronic devices. It has a capacitance of 1000 µF and a capacitance tolerance of ±20%. This capacitor has a voltage rating of 25 V and an equivalent series resistance (ESR) of less than 90 milli-ohms. It offers greater reliability with a useful life of 10000 hours. This capacitor is available in a through-hole package that measures 20 x 13 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 dB Current Sense Amplifier for USB Power Delivery Applications | |
Power Operational Amplifier
from Microchip Technology
|
| The MCP6C26T-050E/LTY from Microchip Technology is a Current Sense Amplifier that is ideal for DC-DC converters, battery management, USB power delivery, uninterruptible power supplies, and differential sensor conditioning applications. It requires a supply voltage of 2.7 - 5.5 V and an input offset voltage from -65 µV to +65 µV. This op-amp provides an output current of ±20 mA. It delivers a signal voltage gain of 50 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| LED Backlight Driver IC for Portable Instrument Application | |
LED Driver IC
from AiT Semiconductor
|
| The A8160AE6R-030 from AiT Semiconductor is an LED Backlight Driver IC that has been specifically designed for driving white LEDs with a constant current. It requires an input voltage of 2.5 - 5.5 V. This LED driver incorporates an internal MOSFET that can support up to 10 white LEDs for backlighting and OLED power application. It benefits from an internal soft start function and can reduce the inrush current. This LED driver incorporates current mode and fixed architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Fast Recovery Diode Module for Multi-Level Switch Inverter Applications | |
Power Diode
from Dynex Semiconductor
|
| The DFM1200FXM12-A000 from Dynex Semiconductor is a Fast Recovery Diode that is designed for low power loss, high voltage applications in motor drives, and power conversion. It has a forward voltage of 1.9 V and a forward current of less than 1200 A. This diode module has a repetitive peak reverse voltage of up to 1200 V and a reverse current of less than 30 mA. It exhibits a low reverse recovery charge and high switching speed. |
| |
Download Datasheet
Product Details | |
|
|
|
| 77.6 kWh IP67-Rated Lithium Battery for Marine Applications | |
Electric Vehicle Battery
from Torqeedo
|
| The Deep Blue Battery 80 from Torqeedo is a Lithium Battery that has been designed for marine applications. This battery requires an input voltage of 348 V. It provides an energy rating of 77.6 kWh and a capacity of 228 Ah. This Li-ion battery This battery is designed for safety and high cycle life, making it a reliable choice for demanding applications requiring performance and longevity. It couples industry-leading volumetric density with an advanced cell-to-pack architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP55-Rated Permanent Magnet Motor for Electric Vehicle Applications | |
EV Traction Motor
from TECO Electric & Machinery
|
| The T ECO 8 Motor from TECO Electric & Machinery is a Permanent Magnet Motor that has been designed for special electric vehicles such as smart internet-connected electric tricycles. It requires an input voltage of 48 V/60 V (DC) and delivers a peak output power of 7.5 kW. This motor has a speed of up to 8000 rpm. It delivers high output with high efficiency, low vibration, and low noise. It is housed in an enclosure that offers high rigidity and reliability. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | London EV Show 2024 | | Get ready for the London EV Show 2024, where the latest electric vehicles and cutting-edge mobility solutions take center stage, showcasing the future of sustainable transportation.Click here to learn more. | | | |
|
|
| Vehicle Control Unit for Electric and Hybrid Vehicles | |
EV ECU
from ECOTRON
|
| The EV22297A from ECOTRON is a Vehicle Control Unit that has been designed to act as the master controller for electric and hybrid vehicles. It requires an input voltage of 9 - 32 V and an input current of less than 1 mA. This vehicle control unit (VCU) is based on Infineon’s 32-bit TC297TP chip that supports 8 MB flash memory, 728 KB SRAM, and 512 KB EEPROM. It is capable of performing core functions such as power ON/OFF management. |
| |
Download Datasheet
Product Details | |
|
|
|
| 0.33 µH Commercial Power Inductor for DC-DC Converter Applications | |
Power Inductor
from Vishay
|
| The IHLL1008ABEZR33M1Z from Vishay is a Commercial Power Inductor that is ideal for SSD modules, DC-DC converter for CPU, noise suppression, filtering, data networking and storage system applications. This inductor has an inductance of 0.33 µH and an inductance tolerance of ±20%. It has a current rating of 6 A and a dynamic contact resistance (DCR) of 14 milli-ohms. This inductor can handle high transient current spikes without causing saturation. |
| |
Download Datasheet
Product Details | |
|
|
|
| I2C-Controlled Over-Voltage Protection Load Switch for USB Type-C Applications | |
Power Switch IC
from NXP Semiconductors
|
| The NX30P6093 from NXP Semiconductors is a High-Voltage I2C-Controlled Over-Voltage Protection Load Switch that has been designed for USB Type-C and power delivery (PD) power control applications. It requires an input voltage of 2.8 -20 V. This power switch has built-in slew rate control for inrush current limit and an integrated current source for input pin impedance detection. It includes under-voltage lockout, over-voltage lockout. |
| |
Download Datasheet
Product Details | |
|
|
|
| 45 V P–Channel Enhancement Mode MOSFET for High-Reliability Applications | |
MOSFET
from TT Electronics
|
| The BS250CSM4 from TT Electronics is a P–Channel Enhancement Mode MOSFET that has been designed for high-reliability applications. It has a drain-source breakdown voltage of over 45 V, a gate threshold voltage of up to 3.5 V, and a drain-source on-resistance of less than 14 ohms. This MOSFET has a continuous drain current of up to 0.15 A and a power dissipation of less than 0.83 W. It is available in a ceramic surface-mount package that measures 5.59 x 3.81 x 1.4 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1800 A AC/DC Current Transducer for Electric Vehicle Applications | |
Current Transducer
from Danisense
|
| The DM1200ID from Danisense is a High-precision Fluxgate AC/DC Current Transducer that is designed for galvanically isolated current measurements from -1800 A to +1800 A. It continuously measures AC current levels of up to 1500 A with a linearity error of less than 1 ppm. This current transducer requires a supply voltage from ±14.25 V to ±15.75 V. It is based on Danisense closed-loop flux gate technology that provides very low offset and ultra-low drift during measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 V N-Channel Switch Junction Field Effect Transistor | |
Junction Field Effect Transistor (JFET)
from onsemi
|
| The MMBF4093 from onsemi is an N-Channel Switch Junction Field Effect Transistor that is ideal for industrial and commercial applications. It has a gate-source voltage of -40 V and a drain-source voltage of 40 V. This JFET has a gate current of 10 mA. This junction field effect transistor (JFET) has a power dissipation of less than 225 mW. It is available in a surface-mount package that measures 2.80 x 1.20 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Silicon NPN Transistor | |
Bipolar Junction Transistor
from Micro Commercial Components
|
| The MMSS8050W-L-TP from Micro Commercial Components is a Silicon NPN Transistor. It has an emitter-base voltage of up to 5 V and a collector-emitter and collector-base voltage of less than 40 V. This RoHS-compliant transistor has a collector current of up to 1.5 A and a power dissipation of less than 200 mW. It has an operating junction temperature range from -55°C to +150°C. This MSL-1 (moisture sensitivity level-1)-rated transistor has an epoxy material. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Field Stop Trench IGBT for Motor Drive Applications | |
IGBT
from Diodes Incorporated
|
| The DGTD65T15H2TF from Diodes Incorporated is a Field Stop Trench IGBT that is ideal for motor drive applications. It has a collector-emitter voltage of less than 650 V, a saturated collector-emitter voltage of 1.65 V, and a gate-emitter threshold voltage of up to 5.5 V. This IGBT has a collector current of less than 30 A and a power dissipation of up to 48 W. It integrates an ultra-soft, fast-recovery anti-parallel diode to enhance the performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V Enhancement mode GaN transistor for Solar Inverter Applications | |
GaN Power Transistor
from Infineon Technologies
|
| The GS-065-030-2-L-MR from Infineon Technologies is an Enhancement Mode GaN Power Transistor that is ideal for bridgeless totem-pole PFC, consumer, industrial, and datacenter high-density power supply, high power adapters, LED lighting drivers, appliance and industrial motor drives, solar inverter, uninterruptable power supplies, laser drivers and wireless power transfer applications. This transistor has a drain-source voltage of up to 650 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| 11 kW Single/Three-Phase On-Board Battery Charger | |
On-Board Charger
from MTA Advanced Automotive Solutions
|
| The EV011KA from MTA Advanced Automotive Solutions is an On-Board Battery Charger that is ideal for plug-in hybrid electric vehicles or pure electric vehicle (buses, trucks, vans, boats, underground vehicles) applications. It requires a single-phase/three-phase input voltage of up to 1000 V (DC). This charger delivers an output power of 11 kW and has an efficiency of over 90%. It supports a high AC input power factor, signifying low reactive power. |
| |
Download Datasheet
Product Details | |
|
|
|
| 28 kW EV Traction Motor for Small Electric Vehicles | |
EV Traction Motor
from Canadian Electric Vehicles
|
| The HPEVS AC-12 Motor from Canadian Electric Vehicles is an EV Traction Motor that has been designed for small, lightweight applications such as small boats, dirt bikes, ATVs, golf carts, kei cars, and microcars. This electric motor delivers a peak output power of less than 28 kW and has an efficiency of up to 92%. It provides a torque of 117 Nm and has a speed of 10000 rpm. This motor includes regenerative braking and an idle function. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Speed Quad-Channel Operational Amplifier for Line Driver Applications | |
Power Operational Amplifier
from Renesas
|
| The UPC844GR-9LG-E1-A from Renesas is a High-Speed Quad-Channel Operational Amplifier designed for general single-power supply use with high-speed pulse response and high stabilization. It requires a supply voltage of -0.3 to 36 V, an input offset current of up to ±75 nA, and an input bias current of less than ±500 nA. This op-amp has a common-mode rejection ratio (CMRR) of 80 dB and provides a channel-to-channel isolation of 120 dB. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by London EV Show 2024 | | |
|
|
| Automotive-Qualified Linear LDO Regulator for Navigation System Applications | |
LDO Voltage Regulator
from ABLIC
|
| The S-19212B30H-V5T2U from ABLIC is an Automotive-Qualified Linear LDO Regulator that is ideal for constant-voltage power supplies in vehicle interiors, home appliances, and automotive applications such as car bodies, headlights, ITS, accessories, navigation systems, and audio systems applications. It requires an input voltage of 3 - 36 V. This regulator provides an output voltage of 2.5 - 16 V and has a drop-out voltage of 0.35 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| EMC/RFI Filter for Three-Phase Motor Drive Applications | |
EMI / EMC Filter
from Schaffner
|
| The FN3258-100-35 from Schaffner is an EMC/RFI Filter that is ideal for three-phase variable speed motor drives, servo drives, converters, inverters, energy conversion, HVAC equipment, elevators, power supplies, and UPS applications. This filter requires an input voltage (continuous) of 277/300/480/520 V and has a current rating of 109.5 A. It ensures compliance with Class A limits according to EN 55011 over a cable length of up to 50 m and beyond. |
| |
Download Datasheet
Product Details | |
|
