| Featured Products this Week |
|
|
| Automotive-Grade Unidirectional Current Shunt Monitor IC | |
PMIC
from Diodes Incorporated
|
| The ZXCT180QA1W5-7 from Diodes Incorporated is an Automotive-Qualified Unidirectional Current Shunt Monitor IC that has been designed to offer a cost-effective solution to resolve 26 V common-mode noise and accurately measure the voltage. It requires an input voltage of 2.7-5.5 V. This RoHS-compliant monitor IC is available in a surface-mount package that measures 2.7 x 2.9 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Dual Switch IGBT Module | |
IGBT
from Fuji Electric
|
| The 2MBI1200XZF170-50 from Fuji Electric is a Dual Switch IGBT Module. It has a collector-emitter voltage of over 1700 V, a gate threshold voltage of 6.5 V, and a saturated collector-emitter voltage of 2.15 V. This IGBT has a continuous collector current of up to 1200 A and a peak collector current of less than 2400 A. This IGBT module measures 144 x 99.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 810 µH High Frequency Planar Transformer | |
Power Transformer
from iNRCORE
|
| The PL10510 from iNRCORE is a High Frequency Planar Transformer. It has a primary turn of 6T & 6T (dual primary) and a secondary turn of 4T (configurable as four 1T windings) with an effective step-down ratio of 1.5:1. It has a minimum primary inductance of 810 µH. It features an isolation voltage of 3000 VAC. It is available in a surface-mount package that measures 49 × 40 × 19.5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V High Voltage Half-Bridge Driver | |
Gate Driver
from Mitsubishi Electric
|
| The M81748FP from Mitsubishi Electric is a High Voltage Half-Bridge Driver. It requires an input voltage of 13.5-20 V and provides an output current of up to 2 A. This gate driver efficiently controls power MOSFETs and IGBTs in half-bridge configurations. This RoHS-compliant gate driver is available in a surface-mount package that measures 10.0 x 7.5 x 2.1 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Advanced Multi-Channel Battery Cell Controller | |
Battery Management IC
from NXP Semiconductors
|
| The BMA7318FAIAE from NXP Semiconductors is an Advanced Multi-Channel Battery Cell Controller designed to monitor battery cells in electrified vehicles (BEV, HEV, PHEV, REX, etc.) and energy storage systems. It provides an 18-channel cell voltage measurement, integrated current measurement, and up to 12-channel analog voltage measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V Trench IGBT Module | |
IGBT
from Semikron Danfoss
|
| The SEMiX205GD12M7HD-M07 from Semikron Danfoss is a Trench IGBT Module. It has a collector-emitter voltage of over 1200 V, a gate threshold voltage of 6 V, and a saturated collector-emitter voltage of 1.5 V. It has a continuous collector current of up to 269 A and a peak collector current of less than 400 A. This IGBT module measures 129.50 x 70.15 x 20.50 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1500 W Automotive-Grade Transient Voltage Suppressors | |
Power Diode
from Vishay
|
| The T15BxxA Series from Vishay are Automotive-Grade Transient Voltage Suppressors that are designed for high-temperature stability and high reliability conditions. They have a reverse breakdown voltage of up to 51 V and a reverse current of less than 20 µA. They are available in surface-mount packages that measure 4.57 x 3.94 x 2.44 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Vehicle Glazing Innovation Summit 2025 | | European Vehicle Glazing Innovation Summit 2025 | | The European Vehicle Glazing Innovation Summit 2025 is designed to foster cross-industry collaborations, ignite innovation, and create new business opportunities. It will bring together key industry leaders, innovators, and experts from across Europe and beyond to explore the transformative developments in vehicle glazing, driving forward a sustainable, safe, and smart vehicle landscape.Click here to learn more. | | | |
|
|
| 5 W AC-DC Single-Output Power Supplies | |
AC to DC Converter
from XP Power
|
| The VCE05 Series from XP Power are Convection-Cooled AC-DC Single-Output Power Supplies that convert AC input voltage of 85-264 V to a single DC output voltage of 3.3-48 V. These converters deliver an output power of over 5 W, an output current of 1573 mA, and offer an efficiency of up to 78%. They are available in a PCB-mount package that measures 33.02 x 27.94 x 19.05 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 A Current-Limiting Protection eFuse IC | |
eFuse IC
from Alpha & Omega Semiconductor
|
| The AOZ17517QI Series from Alpha & Omega Semiconductor are Current-Limiting Protection eFuse designed for applications that require front-end protection at the input line. They require an input voltage of 4.5-20 V and have a maximum output current of 60 A. They have an on-state resistance of 0.65 ohms. They are available in surface-mount packages that measure 5 x 5 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual Channel Digital Isolated GaN Gate Driver | |
Gate Driver
from Navitas Semiconductor
|
| The NV1702 from Navitas Semiconductor is a Dual Channel Digital Isolated GaN Gate Driver. It requires an input voltage of 8-18 V and delivers 80 mA of pull-up current and 300 mA of pull-down current. It handles minimum pulse widths as short as 36 ns and pulse-width distortion of less than 10 ns. This gate driver is available in a surface-mount package that measures 9.80 x 3.80 x 1.35 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Grade Film Capacitors | |
Power Capacitor
from TDK Corporation
|
| The B3264xH series from TDK Corporation are Automotive-Grade Film Capacitors designed for snubbering, resonant circuits, and Power Factor Correction (PFC). They have a capacitance of 0.0022-0.47 µF and a capacitance tolerance of up to ±20%. These capacitors have a voltage rating of up to 2000 V. They are usable in a harsh, humid environment. |
| |
Download Datasheet
Product Details | |
|
|
|
| 650 V SiC N-Channel E-Mode Power MOSFET | |
MOSFET
from Wolfspeed
|
| The C3M0015065D from Wolfspeed is a Silicon Carbide N-Channel Enhancement Mode Power MOSFET. It has a drain-source breakdown voltage of over 650 V, a gate threshold voltage of 2.3 V, and a drain-source on-resistance of less than 21 milli-ohms. This RoHS-compliant MOSFET is available in a through-hole package that measures 41.53 x 16.13 x 5.21 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 V Non-Isolated DC-DC Converter | |
DC to DC Converter
from Micropower Direct
|
| The MSR7820-05CW from Micropower Direct is a Non-Isolated DC-DC Converter that converts an input voltage of 8-36 V to an output voltage of 5 V. It delivers an output current of up to 2A. This low-EMI buck regulator offers efficiency of up to 92% and operates over a temperature range of -40 to 85°C. This RoHS-compliant DC-DC converter measures 17.50 x 11.50 x 9.00 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Single IGBT Module | |
IGBT
from Powerex
|
| The QIS1760002 from Powerex is a Single IGBT Module designed for use in switching applications. It has a collector-emitter voltage of over 1700 V, a gate threshold voltage of 6.6 V, and a saturated collector-emitter voltage of 2.5 V. This IGBT has a continuous collector current of up to 600 A and can withstand an isolation voltage of 3500 V. It is available as a module that measures 110 x 80 x 36 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by European Vehicle Glazing Innovation Summit 2025 | | |
|
|
| 1 V Bidirectional ESD Protection Diode | |
Power Diode
from Nexperia
|
| The PESD1V0C1BSF from Nexperia is a Bidirectional ESD Protection Diode. It has a reverse standoff voltage of 1 V and can withstand surge pulses up to 8 A peak. This diode possesses ultra-low diode capacitance and clamping voltage for effective protection while ensuring minimal signal distortion. It is available in a surface-mount package that measures 0.6 x 0.3 x 0.3 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.9 µH Automotive-Grade Wire Wound Inductor | |
Power Inductor
from AiT Semiconductor
|
| The WSS12560-3R9YQ from AiT Semiconductor is an Automotive-Grade Wire Wound Inductor. It has an inductance of 3.9 μH, an inductance tolerance of ±30% and a DC resistance of 16 milli-ohms. This inductor has a saturated current of 12.20 A and an RMS current of 7.80 A. It features power line noise suppression. This AEC-Q200-compliant inductor measures 12.50 x 12.50 x 6.00 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multiple-Stage Constant Power LED Drivers | |
LED Driver IC
from Mean Well
|
| The XLC-25-KN series from Mean Well are Multiple-Stage Constant Power LED Drivers. They require an input voltage of 100-305 V AC or 141-400 V DC. These drivers provide an output power of 25 W, an output current of 300-1050 mA, and an output voltage of 60 V. They have an efficiency of up to 88%. They are available in screw-mount packages that measure 107 x 40 x 32 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 V Automotive Power MOSFET | |
MOSFET
from Infineon Technologies
|
| The AIMDQ75R060M2H from Infineon Technologies is an Automotive-Grade Power MOSFET. It has a drain-source voltage of 750 V, a gate threshold voltage of 4.5 V, and a drain-source on-resistance of less than 78 milli-ohms. This MOSFET has a continuous drain current of 30 A. This MOSFET is available in a surface-mount package that measures 20.86 x 14.90 x 2.25 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 54 V Synchronous Buck PWM Controller | |
PMIC
from Renesas
|
| The ISL8117FVEZ-T7A from Renesas is a Synchronous Buck PWM Controller. It requires an input voltage of 4.5-60 V, and provides an output voltage from 0.6-54 V. This PWM controller offers programmable switching frequencies between 100 kHz and 2 MHz. This PWM controller is available in a surface-mount package that measures 6.4 x 5.0 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Self-Powered Half-bridge Motor Driver | |
Motor Driver IC
from Power Integrations
|
| The BRD2163C-TL from Power Integrations is a Self-Powered Half-bridge Motor Driver with integrated device protection and system monitoring. It requires an input voltage of 0.8-2.5 V. It has less than 4 mW of power consumption, and provides an efficiency of up to 99%. This motor driver is available in a surface-mount package that measures 10.8 x 9.4 x 1.45 mm. |
| |
Download Datasheet
Product Details | |
|
