| Featured Products this Week |
|
|
| Gate Driver IC for Three-Phase Brushless DC Motor Applications | |
Motor Driver IC
from Monolithic Power Systems
|
| The MP6529 from Monolithic Power Systems is a Gate Driver IC designed for three-phase brushless DC motor driver applications. It requires an input voltage of 5 – 35 V. The motor driver is capable of driving three half-bridges made up of six N-channel power MOSFETs. It uses a bootstrap capacitor and an internal trickle-charge circuit to generate the high-side MOSFET driver voltage, allowing 100% duty cycle operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| True Sine Wave Power Inverter for Marine Applications | |
DC to AC Inverter
from Mean Well
|
| The NTS-450-124US from Mean Well is a True Sine Wave Power Inverter that converts a DC input voltage of 24 V to an AC output voltage of 100 – 120 V. It delivers an output power of 450 W (continuous) and 675 W (peak) and has an efficiency of up to 91%. This DC-AC inverter features a digital design with MCU control that ensures quick response to environmental changes and enhances reliability. |
| |
Download Datasheet
Product Details | |
|
|
|
| 77 V Medium-Voltage Varistor | |
Varistor
from Bourns
|
| The DV 25 K 4032 from Bourns is a Medium-Voltage Varistor that is designed to protect electronic equipment against high-voltage surges in the medium-voltage region with a broad range of current and energy handling capabilities. It has an AC voltage rating of 25 V, a DC voltage rating of 31 V, and a clamping voltage of 77 V. This RoHS-compliant varistor offers excellent transient energy absorption due to improved energy volume distribution and power dissipation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 45 W Isolated AC-DC Converter for Industrial Applications | |
AC to DC Converter
from CUI
|
| The PSK-45-24 from CUI is an Isolated AC-DC Converter that steps down an AC input voltage of 85 - 264 V to a DC output voltage of 24 V. It also accepts a DC input voltage of 100 - 370 V. This converter delivers an output power of 45 W and has an efficiency of 86%. It provides an isolation voltage of over 4000 V (AC) and includes short-circuit, over-current, and over-voltage protection circuits to prevent damage. |
| |
Download Datasheet
Product Details | |
|
|
|
| P-Channel Power MOSFET Load Switch IC for Wearable Applications | |
Power Switch IC
from Diodes Incorporated
|
| The AP22916DCA4-7 from Diodes Incorporated is a P-Channel Power MOSFET Switch IC that has been designed for low-power consumption and load-switching applications. It requires an input voltage of 1.3 - 5.5 V and an input current of 2 A. This load switch consists of control logic, a driver, power MOSFETs, a logic gate, and capacitors. It supports multiple voltage levels that correspond to different time options. |
| |
Download Datasheet
Product Details | |
|
|
|
| Automotive-Qualified 6-Channel White LED Driver IC | |
LED Driver IC
from ROHM Semiconductor
|
| The BD81A76EFV-M from ROHM Semiconductor is an Automotive-Qualified 6-Channel White LED Driver that is ideal for automotive center information display panels, car navigation, cluster panels, HUDs (head-up displays), and small and medium-type LCD panels for automotive use applications. This driver requires an input voltage of 4.5 - 35 V. It features a 6-channel current driver for LED drives and includes a buck-boost current mode DC/DC converter. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2500 W Buck DC-DC Converter for Industrial Automation Applications | |
DC to DC Converter
from Traco Power
|
| The TSC 2072 from Traco Power is a Buck DC-DC Converter that converts an input voltage of 160 – 320 V to an output voltage of 12 V. It delivers an output power of up to 2500 W and has an efficiency of 85%. This REACH-compliant converter offers power fail signals for alerting power issues, external on/off controls for remote management, redundant operation for uninterrupted power backup, and a modular design for flexible input/output configuration and installation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 200 V Enhancement Mode GaN Power Transistor | |
GaN Power Transistor
from Efficient Power Conversion
|
| The EPC29215_55 from Efficient Power Conversion is an Enhancement Mode GaN Power Transistor that is ideal for DC/DC converters, BLDC motor drives, synchronous rectification for AC/DC and DC/DC and multi-level AC/DC power supplies applications. This transistor has a drain-source voltage of up to 200 V, a gate threshold voltage of 1.2 V, and a drain-source on-resistance of less than 8 milli-ohms. It has a continuous drain current of up to 32 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10.65 µH WPC Qi-Compliant Wireless Charging Receiving Coil | |
Wireless Charging Coil
from Vishay
|
| The IWAS3827ABEB100JF1 from Vishay is a Wireless Charging Receiving Coil that has been designed to support WPC Qi specifications. It has an inductance of 10.65 µH and an inductance tolerance of ±5%. This coil has a quality factor of 30 and a dynamic contact resistance (DCR) of 178 milli-ohms. It operates over a temperature range from -40°C to +105°C. This RoHS-compliant receiver coil is available in a through-hole. |
| |
Download Datasheet
Product Details | |
|
|
|
| 80 V Complementary Silicon PNP Power Transistor for Amplifier Applications | |
Bipolar Junction Transistor
from onsemi
|
| The 2N6292G from onsemi is a Complementary Silicon PNP Plastic Power Transistor that is ideal for use in general-purpose amplifiers and switching applications. It has a collector-emitter voltage of up to 70 V, a base-emitter voltage of 5 V, and a saturated collector-emitter voltage of 3.5 V. This RoHS-compliant transistor has a base current of up to 3 A and a collector current of less than 10 A. It has high DC gain and current gain-bandwidth products. |
| |
Download Datasheet
Product Details | |
|
|
|
| -57 V N-Channel Junction Field Effect Transistor (JFET) | |
Junction Field Effect Transistor (JFET)
from Solid State Devices
|
| The SFF4393GW from Solid State Devices is an N-Channel Junction Field Effect Transistor (JFET) that is ideal for industrial and commercial applications. It has a gate-source voltage of -57 V and a drain saturation current of up to 30 mA. This junction field effect transistor (JFET) has a power dissipation of less than 1.8 W. It has a low ON resistance, ensuring efficient operation with minimal power loss. This transistor has a low capacitance and contributes to fast switching. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 V N-Channel Fast Switching MOSFET | |
MOSFET
from Comchip Technology
|
| The CMS45N10H8-HF from Comchip Technology is an N-Channel MOSFET that is ideal for fast switching applications. It has a drain-source breakdown voltage of over 100 V, a gate threshold voltage of 1.5 V, and a drain-source on-resistance of less than 20 milli-ohms. This MOSFET is equipped with improved dv/dt capability to support high speed applications. It is available in a surface-mount package that measures 5.40 x 6.35 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 A Power Management IC for Handheld Applications | |
PMIC
from Renesas
|
| The DA9121 from Dialog Semiconductor is a Power Management IC designed for single in-line pin package (SIPP) modules, smartphones, tablets, ultrabooks, Wi-Fi modules, game consoles, and infotainment applications. It requires an input voltage of 2.5 - 5.5 V and an output voltage of 0.3 - 1.9 V. This power management IC (PMIC) operates as a single-channel dual-phase buck converter designed to deliver up to 10 A of output current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6- Port IEEE 802.3at-Compliant Power-Over-Ethernet IC | |
Power Over Ethernet IC
from Microchip Technology
|
| The PD-9006G/ACDC/M from Microchip Technology is a 6- Port IEEE 802.3at-Compliant Power-Over-Ethernet (PoE) IC that is specifically designed to power IEEE 802.11n and IEEE 802.3at access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients, and other high-power Ethernet end terminal applications. It delivers an output power of 450 W and supports a data rate of 10, 100, and 1000 Mbps. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Single-Cell Li-ion/Li-Polymer Battery Charger IC | |
Battery Management IC
from NXP Semiconductors
|
| The MC34673 from NXP Semiconductors is a Battery Charger IC that has been designed for single-cell Li-ion or Li-Polymer batteries. It requires an input voltage of 2.6-6.6 V and an input current of 1.4 mA. This battery charger primarily consists of an integrated supply, sensing, and control circuits, logic control devices, power MOSFETs, and resistors. It supports a high input voltage of up to 28 V, which eliminates the need for an over-voltage protection circuit. |
| |
Download Datasheet
Product Details | |
|
|
|
| 22 kW On-Board Charger for High-Voltage Charging Applications | |
On-Board Charger
from Stercom Power Solutions
|
| The OBC 22kW-450 from Stercom Power Solutions is an On-Board Charger ideal for public transportation, construction machinery, and marine eDrives applications. It requires an AC input voltage of 190–504 V. This charger delivers a DC output power of up to 22 kW, a DC output voltage of 200-450 V, and a charging current of up to 32 A. It utilizes advanced silicon carbide technology to deliver high efficiency and is compatible with various battery management systems (BMS). |
| |
Download Datasheet
Product Details | |
|
|
|
| 555 F Snap-in Cylindrical Cell for Medical Power Purposes | |
Supercapacitor
from Eaton
|
| The XT3585-3R0567-R from Eaton is a Snap-in Cylindrical Supercapacitor that has been designed for various industries where rapid energy storage and release are required. It has a capacitance of 555 F and a capacitance tolerance from -5% to 20%. This UL-recognized capacitor has a voltage rating of 3 V and an equivalent series resistance (ESR) of less than 2.6 milli-ohms. It utilizes electrochemical double-layer capacitor (EDLC) construction. |
| |
Download Datasheet
Product Details | |
|
|
|
| DC Fuse Link for All-Electric/Hybrid Electric Vehicles | |
EV Fuse
from ADLER Elektrotechnik
|
| The AE62300A04 from ADLER Elektrotechnik is a DC Fuse Link that is ideal for electric vehicles and hybrid electric vehicle applications. It has a voltage rating of 1000 V and a current rating of 30 A. This fuse link can handle a breaking current surge of 30 kA at 1000 V. It is specially engineered and tested to provide best-in-class protection performance in terms of protecting high-power battery charging processes in electric vehicle systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 kW Electric Transaxles for Logistics Applications | |
Electric Axle
from e-comer
|
| The TX1 PLUS SERIE - WHEEL HUBS VERSION from e-comer are Electric Transaxles that are ideal for construction, agriculture, e-mobility, cleaning, and logistics applications. They deliver an output power of 3 kW (continuous) and 8.5 kW (peak) and have an efficiency of 95%. These transaxles provide a torque of 500 Nm and have a speed of 7000 rpm. They integrate a gearbox and an electric motor (AC induction or permanent magnet synchronous motor (PMSM)). |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.7 kV Power Resistor for High-Voltage Power Supply Applications | |
Power Resistor
from Murata
|
| The MHR0307SA106M70 from Murata is a High Voltage Power Resistor that is ideal for consumer equipments, medical, white goods, air purifier, air conditioner, dryer, high-voltage power supply, and industrial equipment applications. It has a resistance of 10 Mega-Ohms and a resistance tolerance of ±20%. This resistor has a voltage rating of 1.7 kV (DC) and a power rating of 0.3 W. It is available in a through-hole package that measures 7.6 x 5 x 5.08 mm. |
| |
Download Datasheet
Product Details | |
|
