| Featured Products this Week |
|
|
| Power Inductors with High Inductance Stability | |
Power Inductor
from Elytone
|
| The ET-51000 Series from Elytone are Power Inductors designed for general-purpose use, switching mode power converters and ripple filters. They have an inductance of 47-2200 µH. These power inductors have a current rating of 0.42-3.0 A and a DCR of up to 1.8 ohms. They have high inductance stability with variable volt-seconds and load currents. These power inductors are available in through-hole packages. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3-Phase Half Bridge Gate Driver IC | |
Gate Driver
from Littelfuse
|
| The LF2136BTR from Littelfuse is a Three-Phase Gate Driver IC designed for high-voltage, high-speed applications, driving N-channel MOSFETs and IGBTs in a half-bridge configuration. This gate driver IC features logic inputs compatible with standard TTL and CMOS levels, with a minimum logic-high input voltage (VIH) of 2.4 V and a maximum logic-low input voltage (VIL) of 0.8 V. It supports high-side switching up to 600 V using bootstrap operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1700 V Automotive-Grade SiC MOSFET | |
MOSFET
from SemiQ
|
| The AS2T030A170H from SemiQ is an Automotive-Grade Silicon Carbide MOSFET. It has a drain-source breakdown voltage of over 1700 V, a gate threshold voltage of up to 4 V, and a drain-source on-resistance of less than 36 milli-ohms. This MOSFET integrates a body diode and has an ultra-low switching loss. It has a low gate charge and includes a driver-source pin for optimised gate driving and easy paralleling. |
| |
Download Datasheet
Product Details | |
|
|
|
| Off-Line Zero Voltage Switching Flyback Switcher ICs | |
PMIC
from Power Integrations
|
| The InnoMux2-EP Series from Power Integrations are Off-Line Zero Voltage Switching (ZVS) Flyback Switcher ICs designed for high-efficiency multi-output applications. They require an input voltage of 85-265 V. These PMICs integrate advanced zero-voltage switching (ZVS) flyback technology with up to three independently regulated outputs. They eliminate the need for post regulators and incorporate a multi-mode quasi-resonant DCM and CCM flyback controller. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Precision Coreless Current Sensor | |
Current Transducer
from Infineon Technologies
|
| The TLI5570-RE35E1-E0001 from Infineon Technologies is a High Precision Coreless Current Sensor with a differential analog interface. This current transducer requires a supply voltage of 1-5.5 V. It enables contactless, galvanically isolated current measurement, reducing power losses and minimizing parasitic inductance. This current transducer incorporates a non-amplified TMR bridge, perfect for 1-to-1 shunt replacement, reducing footprint and costs. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q100 Qualified 3-Phase BLDC Motor Driver | |
Motor Driver IC
from Microchip Technology
|
| The MCP8022 from Microchip Technology is an AEC-Q100 Qualified 3-Phase BLDC Motor Driver. It requires a supply voltage of 4-40 V. This motor driver has three half-bridge drivers to drive external NMOS MOSFETs and includes three operational amplifiers with a fixed 3.3 V or 5.0 V linear regulator. It offers built-in protections such as shoot-through, overcurrent, short-circuit, undervoltage lockout, overvoltage lockout, and thermal shutdown. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 5 kW 3-Phase Industrial AC-DC Converters | |
AC to DC Converter
from Bel Fuse
|
| The TLP5000 Series from Bel Fuse are Three-Phase Industrial AC-DC Power Supplies that convert an AC input voltage of 350-528 V to adjustable DC output voltages of 39-57 V. They offer an output power of 5000 W and have an efficiency of more than 94%. These converters offer excellent power factor and have a high-power density of 21.4 W/in3. They support parallel operation with up to 12 units and operate from 0°C to 70°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 V Radiation Hardened Power eGaN HEMT | |
GaN Power Transistor
from EPC Space
|
| The CDA20N18X3S from EPC Space is a Radiation Hardened Power eGaN HEMT designed for critical applications in the high-reliability or commercial satellite space environments. It has a drain-source voltage of 200 V and a continuous drain current of 18 A. This GaN transistor has a gate-source threshold voltage of 1.2 V and has a drain-source resistance of less than 25 milli-ohms. It features lightweight construction with a new compact die adaptor assembly. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W DC-DC Converter | |
DC to DC Converter
from PULS
|
| The CPS20.241-60 from PULS is a DC-DC Converter that converts an input voltage of 66-154 VDC to an output voltage of 24.5 VDC. It delivers an output current of 16.3 A, an output power of 400 W and an efficiency of 93.7%. This EN 50155-approved converter covers aspects such as temperature, humidity, shock, vibration, and EMI and other parameters. It uses conformal-coated PC boards for reliability in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V SiC MOSFET | |
MOSFET
from Toshiba
|
| The TW007D120E from Toshiba is a Silicon Carbide MOSFET designed for power supply systems in AI data centers and renewable energy-related equipment. It has a drain-source voltage of over 1200 V, a gate threshold voltage of over 5 V, and a drain-source on-resistance of less than 7 milli-ohms. This MOSFET has a continuous drain current of up to 172 A and a total gate charge of 317 nC. It provides low switching loss and low gate drive voltage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60V N-Channel MOSFET | |
MOSFET
from Alpha & Omega Semiconductor
|
| The AONA66642 from Alpha & Omega Semiconductor is an N-Channel MOSFET that is designed for high-frequency switching applications. It has a drain-source breakdown voltage of over 60 V, a gate threshold voltage of 3.4 V, and a drain-source on-resistance of 2.2 milli-ohms. This MOSFET has a continuous drain current of up to 334 A, pulsed drain current of 1336 A and a power dissipation of less than 300 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1500 V Solar PV String Fuse | |
Solar Fuse
from Xinli Fuse
|
| The SLPV-32L from Xinli Fuse is a Solar PV String Fuse designed specifically for the protection of photovoltaic systems. It has a voltage rating of 1500 VDC and a current rating of 32 A. This solar fuse has a breaking capacity of 50 kA and conforms to the International Electrical Committee standard IEC60269. It uses a silver-plated outer cover and a tin-plated inner cap for enhanced conductivity and lowering temperature rise during power dissipation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Single Coil Fast Charging Wireless Charging Receiver | |
Wireless Charging Coil
from LinkCom Manufacturing
|
| The U15QR-6011C1 from LinkCom Manufacturing is a Single Coil Fast Charging Wireless Charging Receiver Module. It has a transmission efficiency curve of up to 70% at its highest point, providing up to 15W of transmission power. This Qi 1.2.4-compatible wireless charging coil has a frequency conversion of 110-205 kHz with a ripple noise of less than 5%. It operates across a temperature range of 0-30°C and incorporates protection features. |
| |
Download Datasheet
Product Details | |
|
|
|
| AECQ200-Qualified Metallised Polypropylene Film Capacitor | |
Power Capacitor
from Rubycon
|
| The 630MPT225J from Rubycon is an AECQ200-Qualified Metallised Polypropylene Film Capacitor that is ideal for large current circuits of electric compressors. It has a capacitance of 2.2 µF and a capacitance tolerance of ±5%. This power capacitor has a voltage rating of 630 V and is suitable for high-temperature applications such as automotive electronics at 125 degree celcius. This RoHS-compliant capacitor is available in a through-hole package that measures 44.0 x 25.5 x 14.0 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1200 V IGBT Module | |
IGBT
from Micro Commercial Components
|
| The MIF450R12C2TL from Micro Commercial Components is an IGBT that is suitable for an inverter for motor drive, AC and DC servo driver amplifier, UPS (Uninterruptible Power Supplies), and soft switching welding machine applications. This IGBT has a collector-emitter voltage of 1200 V and a gate-emitter threshold voltage of 5.8 V. It has a continuous current of 450 A and a pulsed collector current of 900 A. This IGBT dissipates a total power of 2307 W. |
| |
Download Datasheet
Product Details | |
|
