| Featured Products this Week |
|
|
| 40 V Automotive Qualified P-Channel MOSFET | |
MOSFET
from Nexperia
|
| The BUK6Q12-40P from Nexperia is an Automotive-Qualified P-Channel Enhancement-Mode MOSFET that uses trench MOSFET technology. It has a drain-source voltage of -40 V and a gate threshold voltage of up to -2.7 V. This AEC-Q101-qualified MOSFET has a drain-source on-resistance of 24.5 milli-ohm and a maximum power dissipation of 94 W. It has side-wettable flanks for optical solder inspection. |
| |
Download Datasheet
Product Details | |
|
|
|
| 120 W Single-Phase AC-DC Power Supplies | |
AC to DC Converter
from TDK Corporation
|
| The D1SE Series from TDK Corporation are Single-Phase AC-DC Power Supplies that convert AC input voltages of 100-240 V to nominal DC output voltages of 12 V. These power supplies require input DC voltages of 93-300 V and have a power factor of 0.92. They deliver output power up to 120 W and achieve efficiencies of up to 93%. These power supplies include power boost capability and feature a sophisticated thermal design for minimal installation clearances. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1000 V Energy Storage Power Fuses | |
Fuses
from Bourns
|
| The PF-01N100E Series from Bourns are Energy Storage Power Fuses designed to meet semiconductor (aR class) protection standards to protect semiconductors against overcurrent conditions. They have a voltage rating of 1000 VDC, current ratings of 50-450 A and power dissipation up to 100 W. These industrial high-power fuse links provide an interrupting rating of 50 kA at 1000 VDC and are designed to meet IEC 60269-4 (aR class) fuse standard. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 V GaN Power Transistor | |
GaN Power Transistor
from Efficient Power Conversion
|
| The EPC2378 from Efficient Power Conversion is a GaN Power Transistor. This transistor has a drain-source voltage of up to 25 V, a gate threshold voltage of 1.2 V, and a drain-source on-resistance of 0.41 milli-ohms. It has a continuous drain current of 101 A and a pulsed drain current of 699 A. This GaN transistor features an industry-leading RDS(on) x QG figure of merit with zero reverse recovery and superior thermal performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 48 V 3-Phase Industrial AC-DC Converter | |
AC to DC Converter
from Bel Fuse
|
| The TLP5000-1048 from Bel Fuse is a Three-Phase Industrial AC-DC Power Supply that converts an AC input voltage of 350-528 V to a DC output voltage of 48 V. It delivers an output power of 5000 W and has an efficiency of more than 94%. This converter offers excellent power factor and has a high-power density of 21.4 W/in3. They support parallel operation with up to 12 units. It is available in a chassis-mount package that measures 110 x 401.3 x 84.6 mm. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by electronica Shanghai 2026 | | electronica Shanghai 2026 | | electronica Shanghai 2026 is one of Asia’s premier electronics industry exhibitions, bringing together innovators, manufacturers, engineers, and technology leaders from across the global electronics value chain. The event will showcase the latest developments in semiconductors, power electronics, embedded systems, automotive electronics, AI, IoT, sensors, smart manufacturing, and electronic components. Click here to learn more. | | | |
|
|
| Automotive-Grade Single-Channel Load Switch IC | |
Power Switch IC
from Diodes Incorporated
|
| The DML1012ALDSQ from Diodes Incorporated is a Single-Channel Load Switch IC designed for high-current rails and automotive and industrial electronics. This power switch requires an input voltage of 0.8-1.5 V. It integrates an ultra-low resistance n-channel MOSFET to minimize voltage drop and handles continuous currents up to 6 A. This power switch operates with a bias supply of 3.2 V to 5.5 V and features very low leakage current in the off-state. |
| |
Download Datasheet
Product Details | |
|
|
|
| 600 V AEC-Q101 Qualified SCR Thyristor | |
Silicon Controlled Rectifier
from Littelfuse
|
| The SJ6032N2ARP from Littelfuse is a Silicon Controlled Rectifier that is designed for unidirectional switch applications such as phase control in heating, motor speed controls and AC rectifiers and voltage regulators. It has a break-over voltage of up to 600 V and a break-over current of less than 380 A. This UL-1557 recognised thyristor has a gate trigger voltage of 1.5 V and a gate trigger current of 3 to 15 mA. It has an average gate power dissipation of 1W. |
| |
Download Datasheet
Product Details | |
|
|
|
| 65 V Integrated Smart Stepper Motor Driver | |
Motor Driver IC
from Analog Devices
|
| The TMC2262 from Analog Devices is an Integrated Smart Stepper Motor Driver. It requires an input voltage of 4.5-65 V DC and features a low drain-source on-state resistance of 0.08 Ω. This motor driver integrates two half-bridges, each delivering a continuous current of 4 A with a 6 A full-scale sine wave peak, and can handle a peak bridge current of 9 A. It provides SPI for configuration and diagnostics, along with a step and direction interface for control. |
| |
Download Datasheet
Product Details | |
|
|
|
| 700 V e-mode GaN Transistor | |
GaN Power Transistor
from STMicroelectronics
|
| The SGT350R70GTK from STMicroelectronics is an e-mode GaN transistor. It has a drain-source voltage of 700 V and a drain current of 6 A. This GaN transistor has an on-state resistance of up to 350 milli-ohms and has a built-in ESD protection. It features very fast switching, high power-handling capability, and extremely low capacitances. This RoHS-compliant transistor offers zero reverse-recovery charge and is available in a surface-mount package that measures 8 x 8 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q101 Qualified Photocoupler | |
Power Switch IC
from Toshiba
|
| The TLX9920 from Toshiba is an AEC-Q101 Qualified Photocoupler that is ideal for MOSFET gate drivers and automotive applications. This photocoupler requires an input forward voltage of 1.65 V and an input forward current of 12 mA. It features an open coupling voltage of 17.5 V and a short circuit current of 11 µA. This photocoupler optically couples a photodiode array with an infrared light-emitting diode and has an isolation voltage of more than 5000 Vrms. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by electronica Shanghai 2026 | | |
|
|
| 750 V N-Channel SiC Power MOSFET | |
MOSFET
from ROHM Semiconductor
|
| The SCT4013DLLTRDC from ROHM Semiconductor is an N-Channel SiC Power MOSFET. It has a drain-source breakdown voltage of 750 V, a gate threshold voltage of 4.8 V, and a drain-source on-resistance of less than 13 milli-ohms. This MOSFET has a continuous drain current of 120 A and has a power dissipation of 405 W. It offers low on-resistance and has a fast switching speed. This power MOSFET is simple to drive, easy to parallel, and has fast reverse recovery. |
| |
Download Datasheet
Product Details | |
|
|
|
| Half-Cell Monocrystalline PV Modules | |
Solar Panels
from HT Saae
|
| The HT48-210R(ND)-F 440-475W Series from HT Saae are Half-Cell Monocrystalline PV Modules. They deliver output power ranging from 440 W to 475 W at STC (Standard Test Condition) and from 334 W to 360 W at NMOT (Nominal Module Operating Temperature), with a maximum module efficiency of up to 23.8%. These solar panels provide a maximum power voltage of 28.86-30.61 V and a maximum current of up to 15.53 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 V Power Inductors | |
Power Inductor
from Vishay
|
| The IHXL2000VZ-31 Series from Vishay are High Current Inductors. They have an inductance of 1.2-10 µH and a DCR of up to 0.86 mΩ. These inductors have a saturation current of less than 349 A and an SRF of 19.1 MHz. They operate from -55 to +155 °C and have a rated operating voltage of 150 V. These inductors use an improved core material that results in a 20% reduction in core loss and have a metal alloy construction to provide excellent magnetic shielding. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Cell Li-ion/Li-polymer Battery Charger | |
Battery Management IC
from Monolithic Power Systems
|
| The MP2710 from Monolithic Power Systems is a Single-Cell Li-ion/Li-polymer Battery Charger with system power-path management (PPM) for space-restricted, portable applications. It requires an input voltage of 4.35-5.5V and can sustain a voltage up to 21 V. This battery management IC (BMIC) takes input power from either an AC adapter or a USB port to supply the system load and charge the battery simultaneously. |
| |
Download Datasheet
Product Details | |
|
